Overview: The Viper Responder 350 2-way car security system,
Model 3305V, will protect your vehicle with the most up-to-date electronic
technologies available, including the Stinger DoubleGuard shock sensor, the
Revenger six-tone siren, and the Failsafe Starter Kill. The system comes with
one 4-button 2-way LCD remote and one 4-button 1-way remote. The system features 2 auxiliary outputs to provide keyless entry and other
convenience features, and is covered by a limited lifetime warranty.
ESP2: The Viper Model 3305V features ESP2, Viper's
exclusive serial communications protocol that allows extra ultra security,
high-speed communication between systems, and enables many of Viper's key
Clone-Safe Code-Hopping: To prevent the unauthorized cloning
of the remote's transmitter, the receiver and remote controls each use
mathematical algorithms to change their codes each time the remote is used. The
control unit knows what the next codes should be, even if you use the remote
control out of range of the vehicle or the battery has been removed. Should the
remote and control unit ever get "out of sync", you can easily re-sync the
remote by pressing the "lock" button several times within range of the vehicle.
Failsafe Starter Kill: To prevent your vehicle from being
stolen, the control unit has a built-in relay which will disable the starter.
The Automatic Engine Disable (AED) feature, when programmed "on," disables the
starter 30 seconds after the ignition is turned off. To start the car, it will
be necessary to disarm the system with the remote control.
Revenger Siren: The Model 3305V includes the Revenger Soft
Chirp siren (model 514LN). It consists of six different tones in sequence. Tones
2 through 6 can be eliminated by cutting the black/white wire loop, resulting in
a single tone siren. The siren chirps can be either full volume or six decibels quieter than
the 120dB full alarm blast.
Stinger Double-Guard Shock Sensor: The system features the
Stinger Double-Guard Shock Sensor, which is designed to pick up impacts to the
vehicle or glass. The sensitivity of the shock sensor is adjustable on the control
module. When the sensitivity is set, a light impact will generate the
"Warn-Away" pre-warning chirp of the siren. A harder impact will trigger a full
XR Plus: The remote and control unit utilize Viper's
exclusive XR Plus technology, with Super Heterodyne Extreme Long Range receiver
technology. To enhance the range of the remote controls, a separate plug-in
antenna is included with the alarm. The working range of the system is approximately
Remote Controls: The Model 3305V includes two remotes: a
4-button 2-way LCD remote and a 4-button
1-way remote. The 2-way Responder remote has an interactive display which
provides feedback from the alarm so you get instant confirmation of commands as
well as alerts.
The 2-way remote operates at 434 MHz, and can be programmed for multiple
response feedback settings. The buttons fully control the following features and functions of the
- Lock Button: Locks the doors and arms the vehicle
- Unlock Button: Unlocks the doors and disarms the
- AUX Button: Activates Silent Mode and Auxiliary Output
- Red "Asterisk" Button: Panic functions
- Combination: combining Lock and Unlock buttons together will control
an Auxiliary Output
Active vs. Passive Arming: You can activate or arm the
system by pressing the Lock button for one second (Active Arming). The system
will respond with a short siren chirp. If you have connected the vehicle's power
door locks to the system, the doors will lock. The system can be programmed to
arm itself automatically (Passive Arming). If programmed for passive arming, the
system will arm 30 seconds after the ignition is turned off and the system
detects that you have left the vehicle by opening and closing a door. A warning
chirp is sounded 20 seconds after the last door is closed to indicate the system
is about to arm. At the 30 second mark, the parking lights will flash to
indicate the system is armed.
Auxiliary Outputs: Convenience options, such as remote control trunk
release and window automation, are available through the system's two auxiliary
outputs. One function is controlled by pressing the AUX button, while the other
is controlled by pressing Lock and Unlock buttons together.
Silent Mode: The Silent Mode allows you to temporarily turn off the
arm or disarm chirps. When in the Silent Mode, the Warn Away response to lighter
impacts is bypassed, however, the alarm remains fully capable of triggering a
Control Center: The alarm includes a self-adhesive Control
Center which serves multiple purposes. The control center houses the system
antenna for receiving commands from the remotes. It also contains the Valet
button and a bright blue status LED. It connects to the Control Module via a
ribbon cable, and is typically adhered to the upper part of the windshield.
Dome Light Control: When you disarm the alarm, the system will activate the dome light inside the vehicle for approximately 30 seconds. In addition, you can set the system to turn on the dome light when the ignition is turned off. This feature can be programmed on or off.
Valet Mode: You can prevent the system from automatically arming and
triggering by using the Valet Mode. This is very useful when washing the vehicle
or having it serviced. In Valet Mode, the security system will not arm, even
with the remote control, but all convenience features (door locks, trunk
release) continue to work normally.
Power Door Locks: The system will interface with negative-switching and positive-switching factory power door lock systems. When interfacing with any other type of factory door lock systems, or when adding aftermarket actuators, two relays (such as 120E5000) or item 607451M will be required. If your vehicle requires the use of a Data Integration module that controls your factory door locks, no extra parts, besides the Data Integration module, will be required.
Nuisance Prevention Circuitry: The Nuisance Prevention Circuitry
prevents annoying repetitive trigger sequences due to faulty door pin switches
or environmental conditions, such as thunder, jackhammers, airport noise, etc.
If the alarm triggers three times within a 60 minute period, and each time the
same sensor or switch triggers the alarm, the NPC ignores, or bypasses, that
sensor or switch (along with any other sensors or switches sharing the same
zone) for 60 minutes.
Vehicle Recovery System (VRS): The VRS feature is designed to
ensure that any unauthorized user of your vehicle (even if using your keys and
remote control) will not be able to permanently separate you from your vehicle.
After the ignition is turned on, you can arm the VRS with the remote. Once
armed, the system will initiate the following sequence if any door is opened and
- 15 Seconds after the last door has closed, the system status LED begins
flashing (to give you time to distance yourself from your vehicle in the
event of a carjacking).
- 45 Seconds later, the siren begins chirping and parking lights begin
- 15 Seconds after the siren chirps begin, the siren's output changes to a
full blast. From this point on, when the ignition key is turned off, the VRS
will immediately turn on the starter kill feature, preventing the vehicle
from being restarted.
- 3 Minutes after the constant siren begins, the flashing parking lights
and the siren will stop, and the starter kill remains active until the
system is disarmed. If the door is opened or ignition is turned off and on
in an attempt to restart the car, the siren and light flashing will begin
Power Saver Mode: The system will automatically enter the
Power Saver Mode while it is armed or in the Valet Mode, after a period of time
in which no operation has been performed. When the system is armed, Power Saver
mode begins after the system has been armed for 24 hours, and the LED will flash
at half the normal rate. In Valet Mode, the LED will shut off if the vehicle is
not used in one hour. Power Saver Mode lowers the current draw to the vehicle's
Optional Accessories: The Viper Model 3305V can accept a wide range of
convenience and security accessories from Viper and XpressKit:
- SmartStart: The Viper SmartStart module lets you
start*, control, or locate your car from virtually anywhere with your
smartphone. Available SmartStart modules include the VSM200, VSM250, and
VSM50BT. (*separate remote start system required)
- Additional Remotes: Replacement or additional
remotes for Model 3305V.
- Field Disturbance Sensor: The XpressKit
Field Disturbance Sensor detects movement
inside or just outside of your vehicle.
- Audio Sensor: XpressKit
506T for glass impact audio detection.
- Tilt Sensor: XpressKit
507M to monitor the tilting of your parked
vehicle (caused by an attempt to jack up or tow your vehicle)
- Ultrasonic Sensor: XpressKit
509U to monitor the airspace inside
your vehicle to detect subtle window tampering.
- Siren with Backup Battery: XpressKit
515R for an optional siren
with a battery backup.