Honeywell Wireless Water Leak and Freeze Detector
Remote moisture and low temperature detector
Honeywell Wireless Water Leak and Freeze Detector - Place it directly on the floor, or use the included 4-ft. sensing cable
Honeywell Wireless Water Leak and Freeze Detector - Included 4-ft. cable detects leaks the instant they occur
From Honeywell: Lyric Wi-Fi Water Leak and Freeze Detector
Our take on the Honeywell Wireless Water Leak and Freeze Detector by Crutchfield's Eric Angevine
Prevent leaks and flooding before they start
Leak sensors are a great idea — they detect excess moisture and warn you so you can fix the problem early. Honeywell's Wireless Water Leak and Freeze Detector takes that a step further by informing you of changes in temperature and humidity, so you can relieve stressed pipes before the strain becomes too much.
The Honeywell Wireless Water Leak and Freeze Detector tells you about leaks so you can stop them from becoming floods.
The included 4-foot cable is a flexible, sensitive moisture detector that can be placed where you need it.
- sends alerts to your smartphone when a leak is detected
- reports low temperatures so you can avoid frozen or burst pipes
- connects directly to home Wi-Fi® — no hub required
- send alerts to a trusted friend or contractor when you're out of town
- 4-foot water-sensing cable extends detection range
- warning includes LED lights and 100 dB alarm
- powered by included batteries
- warranty: 1 year
- Our 60-day money-back guarantee
What's in the Box:
- Wi-Fi Water Leak and Freeze Detector
- 3 "AA" alkaline batteries
- 48" Cable sensor
- Self-tapping screw (Length 1.25")
- Quick Start Guide
- Installation precaution card
Why Shop With Us?10 Reasons.
Overview: The Honeywell Lyric Wi-Fi Water Leak and Freeze Detector (RCHW3610WF) notifies you when a leak is detected in your home, or the ambient temperature has dropped below a preset point. It works with the Lyric app on your smartphone or tablet so you can instantly receive an early warning to possibly prevent expensive repairs or the loss of personal possessions. It also emits a loud beep to alert you while you're at home. The detector is powered by three AA alkaline batteries (included), and comes with a 48" Cable Sensor that extends the sensing area.
Built-in Wi-Fi: The RCHW3610WF connects to your smartphone, tablet, or laptop through your home Wi-Fi network and the Lyric app. During setup, the detector can be configured through the app, setting the high and low levels for humidity and temperature warnings, and identifying persons to notify in case of the alarm. When a leak is detected, or when the temperature near the sensor has dropped below a preset level, the app will notify you on your smartphone or tablet. You can also mute the detector by pressing the mute button on the app. In addition, the can also view a 30-day rolling temperature trends report, or notify you when the Wi-Fi connection has failed. The Lyric app is compatible with smartphones and tablets running iOS 9.0 or later, or Android 4.3 and up.
Sensor Placement: The Lyric Wi-Fi Water Leak and Freeze Detector is designed to be placed flat on the floor or a surface near a potential water leak (washing machine, dishwasher, water heater, sink, etc.) When water touches the two metal detectors on the bottom of the detector, an electrical circuit is completed, triggering the alarm and the Wi-Fi notification to your smartphone or tablet. You can also wall mount the detector and plug in the included Cable Sensor to detect the leak.
Cable Sensor: The 48" plug-in Cable Sensor included in the box allows you to extend the range of the water leak sensor. The cable has a male 3.5mm plug on one end and a female 3.5mm jack on the other, allowing you to daisy-chain additional cable sensors together. The entire length of the cable is a water sensor, not just the end.
Reusable: After a water leak alert, you can reuse the detector and cable after allowing it to completely dry. Resetting the detector or restoring factory defaults requires inserting a paper clip into the reset hole.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
Why did you buy this?
I redid the basement, and wanted an alarm, in case both sump pumps failed. [ mark Apr 04, 2018 ]
Had a leak, and needed a detector. Research shows this is a good value for price, and Honeywell is a respected company. [ Joe Jan 09, 2018 ]