Skip Navigation

Posi-Products Car Alarm Connectors

19 connectors for installing a car alarm or remote starter

6 Reviews | 2 questions - 2 answers

Overview

Our take on the Posi-Products™ Car Alarm Connectors

Posi-Products connectors help make your electrical connections fast, easy, and reliable with no crimping, soldering, or messy tape. Just strip your stranded wires, insert them in the caps, and then hand tighten the two caps together — the wire ends get locked between opposing cone shapes to create a water-, dirt-, vibration-, and heat-proof housing. You get a strong, low-resistance electrical connection, and you can reuse the connectors, too.

Posi-Products connectors help make your electrical connections fast, easy, and reliable with no crimping, soldering, or messy tape. Just strip your stranded wires, insert them in the caps, and then hand tighten the two caps together — the wire ends get locked between opposing cone shapes to create a water-, dirt-, vibration-, and heat-proof housing. You get a strong, low-resistance electrical connection, and you can reuse the connectors, too.

The Mobile Electronics Series Connector Kits come with various assortments of special Posi-Lock® and Posi-Tap™ connectors with gold-plated contacts to integrate your aftermarket equipment into your vehicle's electrical system. Experienced installers have selected the contents of each kit carefully, so you can be sure you'll have all the right connectors necessary to get the job done.

This Remote Start/Alarm Connector Kit comes with a variety of 19 Posi-Tap and Posi-Lock connectors — more than enough to hook up a remote start or alarm system in your vehicle. Warranty: 30 days.

What's in the Box:

  • 6 Large clear Posi-Tap connectors
  • 2 Small red Posi-Tap connectors
  • 9 Small clear Posi-Tap connectors
  • 2 Clear Posi-Lock connectors
Reviews

Posi-Products™ Car Alarm Connectors Reviews

Average Customer Review(s):

(6 Reviews)
rewards card

Submit a review and enter to win a $350 rewards card

Review this product

Thanks for submitting your review

Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

Your Review

Use the stars below to rate the overall product on a scale of 1-5
1500
Upload your photos

Not visible. Email associated with order.
(e.g., Charlottesville, VA)

Additional Fields (optional)

500
500

By submitting this review, you agree to our terms and review guidelines.

Filter by rating

Customer photos


<< >>
Details

Hands-on research

Product Research

Features

Overview: This Remote Start/Alarm Connector Kit comes with a variety of Posi-Lock and Posi-Tap connectors with gold-plated contacts to integrate your aftermarket equipment into your vehicle's electrical system.

Posi-Tap Connectors: Posi-Tap connectors allow you to tap into wires without cutting or stripping them. Each connector has a tapered design and a threaded cap on each end. Just insert wire to be tapped into the large cap (this is the Tap end) and hand tighten into the barrel. The conductor point pierces the tapped wire without compromising its conductive integrity. Insert stripped wires through the small cap (this is the Accessory end), then tighten. An internal conductor runs the length of the Posi-Tap, giving you a solid electrical connection. The Posi-Tap connectors are vibration proof, fully insulated, and reusable.

Posi-Lock Connectors: Posi-Lock connectors replace old-fashioned bullet connectors with stronger, more reliable connections. Just strip your stranded wires, insert them in the end caps, and then hand tighten the caps - the wire ends get locked between opposing cone shapes to create a dirt-, vibration-, and heat-proof housing. An internal conductor runs the length of the Posi-Lock, giving you a solid electrical connection. The Posi-Lock connectors are also reusable.

Dimensions:

  • Lock Connector: compatible with 10-12 gauge wire
    • Length: 1.447"
    • Overall Diameter: 0.384"
    • Diameter of Hole in Caps: 0.115"
  • Large Posi-Tap Connectors: compatible with 12-18 gauge wire on both the Tap end and the Accessory end
    • Length: 1.509"
    • Maximum Diameter: 0.506"
    • Width of Slot in Large Cap(Tap end): 0.144"
    • Diameter of Hole in Small Cap (Accessory end): 0.21"
  • Red Posi-Tap Connectors: compatible with 14-18 gauge wire on the Tap end and 18-24 gauge wire on the Accessory end
    • Length: 1.275"
    • Maximum Diameter: 0.384"
    • Width of Slot in Large Cap (Tap end): 0.1"
    • Diameter of Hole in Small Cap (Accessory end): 0.15"
  • Small Clear Posi-Tap Connectors: compatible with 18 gauge wire on the Tap end and 18-24 gauge wire on the Accessory end
    • Length: 1.275"
    • Maximum Diameter: 0.384"
    • Width of Slot in Large Cap (Tap end): 0.07"
    • Diameter of Hole in Small Cap (Accessory end): 0.15"

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Q & A

Customer Q&A

Crutchfield asked  
Why did you buy this?

I've used Posi Connectors before and they are incredibly easy to use. Additionally, I don't want to damage my factory harnesses and the Posi-Tap will not damage them. [ J  Jun 04, 2017 ]
My Advisor, Conrad, suggested this would make my installation easier. [ KENNETH B  Apr 03, 2017 ]
I have used posi-products many times over the years and they make the job easy and clean [ Chris  Oct 20, 2016 ]
Seem to be needed for alarm install [ Titus  Jul 01, 2016 ]
dont want to splice and solder in the factory harness of my car [ Danny  Feb 06, 2016 ]
just giving it a try [ Frederick  Dec 21, 2015 ]

2 questions already asked

The Posi-Products Car Alarm connector set includes 6 Large clear Tap connectors, 2 Small red Tap connectors, 9 Small clear Tap connectors and 2 Clear Posi-Lock connectors for a total of 19 connectors. I hope that helps! [ Larry  Jan 13, 2017 ]  Staff
The Lock Connectors are compatible with 10-12 gauge wire The Large Tap Connectors are compatible with 12-18 gauge wire on both the Tap end and the Accessory end The Red Tap connectors are compatible with 14-18 gauge wire on the Tap end and 18-24 gauge wire on the Accessory end The Small clear Tap connectors are compatible with 18 gauge wire on the Tap end and 18-24 gauge wire on the Accessory end You will find this information, and more, by clicking the "Details" tab on the product's main webpage. [ Ryan  Oct 28, 2015 ]  Staff
Articles