Yamaha R-S202/Klipsch R-15M Bundle
Stereo system with Bluetooth®
Our take on the Yamaha R-S202/Klipsch R-15M Bundle by Crutchfield's Deia Z.
A winning combination
Need help finding a great-sounding, affordable stereo system? We put together this bundle with you in mind. We've paired one of our best-selling stereo receivers with a perfectly matched set of bookshelf speakers. We also included some high-quality speaker wire, so you can get everything hooked up right away.
Sweet stereo sound
Built on decades of audio expertise, Yamaha's R-S202 stereo receiver delivers smooth, natural sound. Connect up to four audio sources, and take advantage of the R-S202's built-in Bluetooth to stream any music you want from your compatible mobile device.
The Klipsch R-15M bookshelf speakers perform beautifully in a two-channel music system. This solidly built pair features Klipsch's legendary horn-loaded tweeter, which produces clear, detailed highs. You'll enjoy solid bass response thanks to the copper spun 5-1/4" woofer and rear-firing port. And 5-way binding posts offer easy, secure wire connections.
Make the right connection
Monster XP speaker cable offers high-quality performance and is ideal for small speakers and desktop systems.
- all-in-one bundle for high-performance stereo sound
Yamaha R-S202 stereo receiver:
- 100 watts x 2 into 8 ohms (40-20,000 Hz) at 0.2% THD
- built-in Bluetooth lets you stream directly from compatible devices
- 4 stereo RCA audio inputs
- no phono input to connect a turntable you'll need to add a phono preamp
- stereo RCA output for audio dubbing
- 40 AM/FM presets with station naming
- front-panel bass and treble controls
- front-panel A/B switching for two pairs of speakers
- 2 sets of spring-clip speaker connectors
- full-size (1/4") headphone jack
- sleep timer
- remote control
- 17-1/8"W x 5-9/16"H x 13-9/16"D
- weight: 14.8 lbs.
Klipsch Reference R-15M bookshelf speakers:
- frequency response: 62-24,000 Hz (±3dB)
- impedance: 8 ohms compatible
- sensitivity: 94 dB
- power handling: up to 85 watts RMS (340 watts peak)
- 90° x 90° Hybrid Cross-Section Tractrix® horn with 1" LTS (Linear Travel Suspension) aluminum diaphragm compression tweeter
- 5-1/4" copper spun magnetically shielded IMG woofer
- bass-reflex design
- rear-firing port provides fast, efficient airflow from the cabinet for clear, powerful bass
- removable grilles offer a clean, streamlined look
- durable polymer veneer finish
- binding post speaker terminals
- 7"W x 12-1/2"H x 8-1/8"D
- weight: 7.13 lbs. each
Monster XP® speaker cable:
- length: 50 feet
- Magnetic Flux Tube® construction breaks up internal magnetic fields for more natural sound
- Linear Polyethelyne (LPE) dielectric insulation for reduced signal loss
- flexible, multi-stranded 16-gauge cable with smooth jacket for easy installation
- warranty: 2 years (receiver), 5 years (speakers), limited lifetime (speaker cable)
- Our 60-day money-back guarantee
What's in the Box:
- Yamaha R-S202:
- Stereo receiver
- Wireless remote control (RAX33)
- 2 "AA" batteries
- AM loop antenna
- FM wire antenna
- Owner's manual
- Warranty information
- Online product registration information
- Yamaha Worldwide contact information
- "Notice" sheet
- Klipsch R-15M:
- 2 Bookshelf loudspeakers
- 2 Grilles
- 8 Self-adhesive rubber feet
- User Manual
- Warranty sheet
- Important Safety Instructions
Why Shop With Us?10 Reasons.
100 Watt x 2 Channel Amplifier: The Yamaha R-R202 stereo receiver employs a 100-watt x 2-channel (40-20kHz, 8-ohms, 0.2% THD) high-drive amplifier with a high sound quality design that minimizes the length of signal routes and optimizes the circuit layout. Yamaha positioned the power transformer near the power amp circuit to reduce power loss, while improving peak power supply capacity to enable high volume output. The signal ground and power supply ground are connected at one point, eliminating mutual interference to achieve a higher S/N ratio. The result is sound filled with clarity and a feeling of openness.
Built-in Bluetooth: The Yamaha R-R202 features built-in Bluetooth (ver 4.1+ EDR), allowing you to stream stored music and music apps on your Bluetooth-enabled Apple iPod/iPhone/iPad, Android smartphone/tablet, Windows PC/Phone, or Mac laptop/computer to the stereo receiver. In addition to the standard SBC Bluetooth codec, the receiver also supports the AAC codec for higher quality sound from Apple iPod/iPhone/iPad devices. You will still control music playback functions and view song/artist information from your Bluetooth-enabled source device.
Analog Inputs/Output: The Yamaha R-R202 features four analog stereo RCA inputs to connect up to four audio components, and a single stereo RCA record output to connect to a CD-recorder or other recording device.
AM/FM Tuner: The Yamaha R-R202 stereo receiver features a built-in AM/FM tuner with manual, seek, and preset tuning. The R-R202 lets you store up to 40 AM/FM station presets. Auto preset lets you automatically search for and register FM stations that can be received in your area. An indoor FM wire antenna and AM loop antenna are included with the receiver.
A & B Speaker Terminals: The R-R202 is fitted with A & B speaker terminals so you can power up to two pair of speakers. The speaker selector switch on the front-panel of the receiver makes it easy to switch between speaker outputs, allowing you to hear the sound from one speaker pair (A or B) or from both speaker pairs (A+B). In addition, compatible speakers can be bi-wired using the A & B speaker terminals simultaneously (they are wired in parallel). The eight spring-clip speaker terminals that will accept bare wire (up to 12AWG) and pin-connectors.
|Speaker Connection||Speaker Impedance|
|Speakers A or B||8-ohm or higher|
|Speakers A and B||16-ohm or higher|
|Bi-wiring||8-ohm or higher|
Headphone Jack: The stereo receiver has a standard 1/4" headphone jack on the front panel for private listening. When headphones are plugged in, the receiver's speaker output is not muted, so remember to turn the A and B speakers off.
Tone Control: The Yamaha R-R202 offers Bass, Treble, and Balance adjustment. Bass & Treble can be adjusted independently from -10dB to + 10dB. Balance can be set between Left+10 and Right+10.
Max/Initial Volume: You can set the maximum volume level of the receiver so that its volume will not be accidentally increased above a certain level (01-99, Max). Use the Initial Volume feature to specify the volume level when the receiver's power is turned on. You can select 01-99, Max, Mute, or Off. When "Off" is selected, the volume level used when the receiver was turned off will be applied.
IR Remote: The included IR remote control provides wireless operation of the stereo receiver and a connected Yamaha CD receiver.
Sleep Timer: Use the Sleep timer to automatically set this unit to standby mode after a certain amount of time (30/60/90/120 mins). The sleep timer is useful when you are going to sleep while listening to the receiver.
Power Management: A power management function automatically cuts off the power (switches to standby mode) when the receiver has not been operated for a long time. It can be set to two, four, eight or 12 hours, or off. In addition, power consumption during standby is only 0.5 W, achieving good energy saving performance.
1" Horn-Loaded Tweeter: The R-15M bookshelf speaker features Klipsch's proprietary Tractrix Horn technology mated with a 1" aluminum LTS tweeter, for impressive high-end response and greater extension, enhanced imaging and powerful dynamics.
- Tractrix Horn Technology: The square Tractrix Horn delivers a 90° (w) x 90° (h) dispersion pattern for a broader sound-stage.
- LTS (Linear Travel Suspension): Behind each horn lies a 1.0-inch titanium tweeter with a linear travel suspension to minimizes distortion for enhanced, detailed performance.
5.25" Copper-Spun IMG Woofer: The Klipsch R-15M bookshelf speaker is outfitted with a single 5.25" Copper-Spun IMG woofer. The Copper-Spun IMG (Injection Molded Graphite) woofer is exceptionally light while being extremely rigid - providing remarkable low frequency response, with minimal cone breakup and distortion.
Flared Port: The Klipsch Reference series bookshelf speaker features a rear-firing port that is perfectly matched to the cabinet and drivers. The port is precisely flared to minimize turbulence even at the lowest frequencies.
MDF Cabinet: The Klipsch R-15M bookshelf speaker features a MDF cabinet with a brushed polymer veneer black finish that seamlessly integrates into almost any room or decor. MDF (Medium Density Fiberboard) is utilized because of its damping characteristics for natural, uncolored sound without unwanted vibration and distortion.
Acoustically Transparent Grille: The Klipsch R-15M bookshelf speaker comes with a removable, black cloth grille that is acoustically transparent.
5-Way Binding Posts: The Klipsch Reference series bookshelf speaker is fitted with sturdy 5-way binding posts to ensure a secure connection to many types of cable and connectors. The 5-way binding post terminals will accept banana plugs (single or dual), pin-connectors, spade-lugs and bare wire (up to 10AWG).
Mounting Options: The Klipsch R-15M can be placed on a speaker stand, bookshelf, table, or other flat surface. The bookshelf loudspeaker comes with self-adhesive rubber feet to secure the speaker in place and prevent any damage to your stand's or shelf's surface. The rubber feet add approximately 0.25" to the height of the speaker.
Note: The R-15M bookshelf speaker does not include a keyhole slot to wall-mount the speaker. Nor, does it feature a threaded insert to wall-mount the speaker using an optional wall-mount bracket.
Placement: For optimum performance, Klipsch suggests placing the bookshelf speakers 6' to 15' apart. They may also be toed-in slightly for better stereo imaging. The listening position should be about 1 to 1.5x the distance separating the speakers.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
1 question already asked
It means that the item is back ordered. We put red lettered "This item is no longer available" when the product has been discontinued and we are out of them. HTH! My Bio: http://www.crutchfield.com/Support/Bio.aspx?bio=101 [ Paul Dec 11, 2017 ] Staff