Skip Navigation

Klipsch CDT-5800-C II

In-ceiling speaker

13 Reviews | 8 questions - 19 answers

Item # 714C5800C2

In Stock

Add to Cart

Ask an expert

Our VA-based experts can help.

1.888.955.6000

ChatEmail

Overview

Our take on the Klipsch CDT-5800-C II

Treat yourself to top-notch sound with a speaker that blends seamlessly into your home's décor. The Klipsch® CDT-5800-C II installs in your ceiling, so it won't take up one inch of floor space. And its high-tech design and solid construction make it a great choice for movie and music lovers alike. You can use multiple CDT-5800-C IIs for surround sound in an all-Klipsch home theater, or install them in pairs for stereo listening with your multi-room audio system. Either way, you'll enjoy crisp, clear Klipsch sound without the clutter of conventional speakers.

Treat yourself to top-notch sound with a speaker that blends seamlessly into your home's décor. The Klipsch® CDT-5800-C II installs in your ceiling, so it won't take up one inch of floor space. And its high-tech design and solid construction make it a great choice for movie and music lovers alike. You can use multiple CDT-5800-C IIs for surround sound in an all-Klipsch home theater, or install them in pairs for stereo listening with your multi-room audio system. Either way, you'll enjoy crisp, clear Klipsch sound without the clutter of conventional speakers.

Ready, aim, music!

The CDT-5800-C II's tweeter provides wide dispersion for consistent sound, and it swivels, so you can aim the sound precisely where you need it to go. You can even rotate the 8" woofer a full 360 degrees and tilt it up to 15 degrees in any direction. This flexibility gives you full, detailed sound no matter where you place the speaker. Plus, tweeter and mid-bass level switches let you adjust the sound to suit your personal taste and your room's acoustics.

Horn technology for room-filling sound

Because high-frequency sounds are more directional than bass frequencies, it's especially important to target them right toward your ears. Klipsch places their titanium tweeter inside a flared opening, known as a "horn." This design brings out details in everything you listen to, while reducing reflections that can color the sound.

Keeping a low profile

The CDT-5800-C II stays inconspicuous with its Slimtrim™ grille. The visible frame size is reduced by 90% and grille depth is reduced by 80% over previous designs, for a nearly flush finish that blends in beautifully. The paintable aluminum, magnetic grille attaches securely with ease to virtually eliminate resonant distortion.

An optional in-ceiling bracket is recommended for installing the CDT-5800-C II in new construction.

Got wire?

Most speakers don't include any. Learn more about in-wall wiring.
Shop our selection of in-wall speaker wire.

Awesome sound and easy to install!!

Anonymous, Rogers, AR

What's in the Box:

  • Ceiling-mount speaker
  • White metal mesh grille
  • Cardboard template
  • Owner's Manual (En/Fr/Sp)

Product Highlights:

  • 1" titanium tweeter with swiveling Tractrix® horn
  • pivoting 8" Cerametallic™ woofer
  • power handling: up to 50 watts RMS (200 watts peak)
  • frequency response 49-23,000 Hz (±3dB)
  • sensitivity 95 dB
  • 8-ohm impedance
  • paintable SlimTrim™ magnetic grille
  • treble and mid-bass attenuation switches
  • cutout dimensions: 9-13/16" diameter
  • mounting depth: 5-1/8"
  • warranty: lifetime
  • Our 60-day money-back guarantee
Priced each
    Reviews

    Klipsch CDT-5800-C II Reviews

    Average Customer Review(s):

    (13 Reviews)
    rewards card

    Submit a review and enter to win a $350 rewards card

    Review this product

    Thanks for submitting your review

    Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

    Your Review

    Use the stars below to rate the overall product on a scale of 1-5
    1500
    Upload your photos

    Not visible. Email associated with order.
    (e.g., Charlottesville, VA)

    Additional Fields (optional)

    500
    500

    By submitting this review, you agree to our terms and review guidelines.

    Filter by rating

    Customer photos


    << >>
    Details

    Hands-on research

    Features and Specs

    Quantity in Package Single
    Tweeter Horn-loaded dome
    Midrange Size N/A
    Woofer Size 8
    Cutout Size 9.8125
    Woofer Composition Cerametallic
    Woofer Surround Rubber
    Power Range (Watts) 50
    Sensitivity 95 dB
    Impedance (Ohms) 8
    Frequency Response 49-23kHz
    Connector Type Spring posts
    Bi-Amp Inputs No
    Enclosure Type In-ceiling
    Parts Warranty Ltd. Lifetime
    Labor Warranty Ltd. Lifetime

    Product Research

    Features
    Mounting Options

    Features

    Controlled Dispersion Technology (CDT): The Klipsch CDT-5800-C II in-ceiling speaker features a patent-pending gimbal mechanism, known as Controlled Dispersion Technology (CDT). The tweeter and woofer are independently adjustable, allowing both the high and low frequencies to be directed toward the listening area.

    High Efficiency: The high-efficiency design of the Klipsch in-ceiling speakers allows you to get much more output than most in-wall and in-ceiling speakers. Due to the long speaker wire runs that are common in whole-house audio systems, the power coming from the amplifier is significantly reduced by the time it reaches the speakers. The 95dB efficiency of this speaker means it will play much louder at low power than other less-efficient speakers.

    Drivers: The Klipsch CDT-5800-C II uses a high-quality 1" titanium dome compression driver (tweeter) mated to an exclusive Tractrix Horn, combined with a 8" Cerametallic woofer in a 2-way design.

    • Tweeter: There is a 1" titanium dome compression tweeter mated to a swiveling 100° Tractrix Horn. The swiveling horn design dramatically increases efficiency by enabling the speaker to produce more output using less energy. The horn-loaded tweeter allows you to point the sound to a specific location, and has more controlled directivity than a conventional dome tweeter.
    • Woofer: The 8" copper-colored, machine-spun Cerametallic woofer can rotate a full 360°, and then shift 15° in any direction. The solid Aluminum diaphragm, anodized to add stiffness and provide perfect damping, has a new hi-tech look that also delivers increased rigidity for even tighter, more defined bass.

    Speaker Terminals: The speaker has a pair of gold-plated, spring-loaded binding posts that can accept up to 12-gauge wire, as well as pin connectors and single banana plugs.

    Tweeter/Mid-bass Attenuation Switches: If the speaker is installed in an acoustically bright room, such as a bathroom or a kitchen, you can attenuate the tweeter by -3dB, using the Tweeter Attenuation Switch. If the speaker is located in a corner and produces too much bass, you should adjust the Mid-bass level switch (-3dB). Both switches are located on the front of the speaker.

    ABS Basket/Frame: The CDT-5800-C II has a sturdy ABS basket and frame. The frame can be painted to match any decor.

    SlimTrim Magnetic Grille: With an all new grille, the visible frame size is reduced by 90% and grille depth is reduced by 80% over the previous design, for a more edge-to-edge consistent look that blends in with the wall more attractively. The new aluminum, paintable, magnetic grille attaches tightly and securely with ease to virtually eliminate resonant distortion.

    Power Specifications Note: The manufacturer has specified the maximum power handling of this speaker as 50 watts RMS (200 W Peak). Klipsch has also published a recommended amplifier power specification as 100 watts.

    Mounting Options

    Installation: The speaker can be installed in new or existing construction. It requires a cutout diameter of 9.8125". For new construction, purchase of the IK-800-C installation kit (714IK800C, sold separately) is highly recommended. For existing construction, the speaker should be installed in drywall at least 3/8" thick. It can also be installed in a drop ceiling (2' x 2' or 2' x 4' ceiling tiles only). In both cases, to maximize the acoustic performance of the in-ceiling speakers, Klipsch recommends you replace the original mounting panel with 1/2" or 3/4" plywood or MDF. A cardboard template is included to assist you in making the cutout.

    Our Product Research Team

    At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

    Accessories
    Q & A

    Customer Q&A

    Crutchfield asked  
    Why did you buy this?

    building out whole house audio and want these awesome speakers in room ceilings [ Gary  Jun 05, 2017 ]
    Sound , quality , reputation ! [ ROBERT  Feb 02, 2017 ]
    Brand and reviews [ Jason  Sep 05, 2016 ]
    Wanted top notch speakers for my cathedral ceiling. [ BRIAN  Apr 28, 2016 ]
    Recommended by my Audio/Video installer [ Rob  Dec 09, 2015 ]

    8 questions already asked

    They are not recommended for use in "all weather" outdoor installations. [ Ryan  Mar 23, 2017 ]  Staff
    Sorry can't help. Put them in ceiling in house in California where temperature doesn't fluctuate much. [ THOMAS C  Mar 16, 2017 ]
    Yes. I used them with 4 ceiling speakers and it was a completely secure match/fit with no issues. [ Quintin  Jan 16, 2017 ]
    Yes. Did it in my new house. Easy installation. [ Douglas  Jan 16, 2017 ]
    Yes it will work. We used it with the CDT 2800 and the CDT 5800 shows the same speaker depth. [ ERIC  Jan 16, 2017 ]
    I wondered the same thing, and just painted the ceiling swiss coffee to match the speaker instead [ Richard  Aug 09, 2016 ]
    The woofer and tweeter can be aimed towards the listeners [ LENARD  Jul 03, 2016 ]
    The entire speaker rotates and the tweeter swivels in any direction. [ Douglas  Jun 28, 2016 ]
    Just the tweeter. I am no expert, but I believe that is all you need given the sounds waves travel differently depending on the frequency. That is why you can place a sub woofer anywhere in the room. These speakers sound and look great - practically invisible. [ Richard  Jun 28, 2016 ]
    Both the speaker and the tweeter are movable, but only a small amount. [ BEN  Jun 28, 2016 ]
    Both the cone and the tweeter are amiable, independently of each other. [ James  Jun 28, 2016 ]
    The woofer and tweeter can both be aimed. [ mark  Jun 28, 2016 ]
    The woofer and tweeter both swivel independently. [ JON  Jun 28, 2016 ]
    Just built 2 home theater systems that include Klipsh CD-5000CII, r-5650-SII, and 5650--WII. Also included subwoofers PSB CWS8, plus Polk Audtio 80F/X, 255c-RT, atrium outdoors, and finally to get Altos sound, I got ONkyo SK-H410. Everything is works and sounds great. All the speakers came from Crutchfield. I called before I ordered and discuss every speaker in detail with representative. Klipsh speakers are beautifully made. I also order two Denon Command HT receiver/amplifier. Tom [ THOMAS C  Nov 17, 2015 ]
    Absolutely. A surround sound system with those Klipsch speakers would provide very good sound quality. [ Larry  Nov 20, 2015 ]  Staff
    Thanks for your question. For information on selecting the best amp for your subs I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the amp models and help you make the best choice for your system. [ Krissy  Feb 25, 2015 ]  Staff
    I'm sorry, correction 50rms** [ Corey  Feb 25, 2015 ]
    I understand front ceiling speakers should be above the front tower speakers. Rear ceiling speaker is just behind seating area. Rear surrounds about even with seating. This makes my configuration a 5.4.2. That's 2 subs [ Earl  Jun 24, 2017 ]
    Emanuel, I was always taught that 10' is a good seperation between speakers. I used these speakers for my mid speakers between my front and rear speakers. I pointed the tweeters at my seating location, they work great. If you can't seperate the speakers that far try to place them just outside the seating area. I hope this helped. [ JEFFREY  Nov 04, 2014 ]
    Articles