Wireless Powered Sub: The
Klipsch RP-110WSW powered subwoofer is part of the
Klipsch Reference Premiere HD Wireless speaker system. The RP-110WSW powered
combines WiSa wireless speaker & audio technology with Klipsch's legendary audio
& system design expertise for a high-performance wireless speaker.
10" Woofer + 200W Amp: The Klipsch RP-110WSW features a
front-firing 10" spun-copper, Cerametallic long-throw woofer that is exceptionally light yet
extremely rigid, while providing remarkably low frequency response with minimal
cone breakup and distortion. The 10" woofer is powered by a custom-designed,
DSP controlled 250 watt RMS (500 watt Peak) amplifier for dynamic bass
performance without distortion.
Note: There are no level, crossover, or phase controls on
the RP-110WSW wireless powered sub. It does have a built-in, fixed low-pass
crossover set as 75Hz.
Bass Reflex MDF Cabinet: The wireless powered sub's
front-firing slot port with proprietary internal geometry minimizes port noise
for clean undistorted low frequencies. This highly efficient enclosure design
produces more output using less energy. The RP-110WSW features a rigid, durable
MDF cabinet finished with a brushed black polymer veneer that protects against unwanted vibration and distortion.
The enclosure also incorporates a MDF plinth that lends an acoustically sound,
authoritative stance when placing the subwoofer on your wood, tile, or carpeted
floors. A cloth grille protects
the front of the woofer and covers the front-baffle of the enclosure.
Reference Premiere HD Wireless System: The complete Klipsch
Reference Premiere HD Wireless System consists of the
RP-HUB1 HD Control Center,
RP-440WF floorstanding speaker,
RP-140WM bookshelf speaker,
RP-440WC center-channel speaker, and
RP-110WSW powered subwoofer (all sold separately). The floorstanding, bookshelf, and center-channel wireless speakers feature a two-way design and
utilizes the same driver and horn technology as Klipsch's Reference Premiere
series. The wireless powered subwoofer is modeled directly after the Klipsch
Reference Premiere RP-110SW subwoofer. The Klipsch HD Control Center acts as the
system's hub and directs audio wireless to each speaker. All of the Klipsch
Reference Premiere HD Wireless System products offer the convenience of WiSa
Requires HD Wireless Control Center: The Klipsch Reference Premiere HD
Wireless System requires at least two
RP-440WF floorstanding speakers or two
RP-140WM bookshelf speakers, plus the
Klipsch RP-HUB1 HD Control Center (sold separately). The Klipsch HD Control Center
replaces complicated AV receivers and transmits audio wirelessly to the
Reference Premiere HD Wireless System's speakers. The HD Control Center creates
its own dedicated WiSa (Wireless Speaker & Audio) network independent of your home WiFi to eliminate dropouts
and interference caused by bandwidth constraints within your home.
WiSa Wireless Technology: Through the use of state-of-the-art
WiSa (Wireless Speaker
& Audio) technology, the Klipsch Reference Premiere HD Wireless System
delivers unmatched wireless audio performance and ease-of-use. WiSa technology
transmits 24-bit audio at sample rates up to 96kHz/second, with robust error
recovery for uninterrupted listening enjoyment. With extremely low latency
negligible speaker-to-speaker delay, it offers flawless wired-quality
performance and reliability. WiSa technology operates in the relatively unused
5.2 to 5.8 GHz UNII radio frequency spectrum, reliably transmitting uncompressed
audio from 2ch stereo to 7.1ch surround, along with system configuration and
calibration data. It has a range of approximately 30'.
Note: The powered subwoofer has no speaker wire or RCA terminals on the back-panel to
connect to a typical AV receiver. Instead, it has a built-in wireless
receiver that functions only with the
Klipsch RP-HUB1 HD Control Center
(sold separately). The only hardwired connection the powered sub will need is AC
power via the included detachable AC power cord.
High Res 2.0-7.1ch Audio: The Klipsch Reference Premiere HD Wireless
System can deliver 24-bit/96kHz audio in configurations ranging from 2ch stereo to 7.1ch surround sound,
supporting both Dolby Digital Plus (7.1ch) & DTS (5.1ch). The RP-110WSW can be used as a powered
sub in a 2.1ch stereo configuration or in a 3.1, 4.1, 5.1, or 7.1ch home theater
Simple Setup: The Klipsch Reference Premiere HD Wireless System gives
you the ability to place speakers anywhere in your room without running speaker
wire and cables through walls or under carpet. Klipsch's proprietary Smart Speaker Selector
provides a single-button solution on the rear of each speaker that seamlessly
makes the connection to the HD Control Center without the need for speaker wire
or a complicated AV receiver.
Firmware & Software Updates: Once you register the Klipsch
Reference Premiere HD Wireless System, Klipsch will offer free firmware &
software upgrades which can be downloaded from their website, so you can stay
current with the latest Klipsch technologies while expanding your system over
AC Power + Auto On/Off: The Klipsch
RP-110WSW wireless powered sub will need to be plugged into an AC power outlet,
along with any other Klipsch Reference Premiere HD Wireless speakers you have in
your system. The RP-110WSW will turn on automatically when
it senses a wireless audio signal and turn off (standby) automatically when
there is no audio signal present. The powered sub is exceptionally efficient
whether it is on or in standby mode.