High Efficiency: The high-efficiency design of the Klipsch
in-ceiling speakers allows you to get much more output than most in-wall and
in-ceiling speakers. Due to the long speaker wire runs that are common in
whole-house audio systems, the power coming from the amplifier is significantly
reduced by the time it reaches the speakers. The 91dB efficiency of this speaker
means it will play much louder at low power than other less-efficient speakers.
2-Way Driver Design: The Klipsch R-2650-C II uses a
high-quality 1" silk dome compression driver (tweeter) mated to an exclusive
Tractrix Horn, combined with a 6.5" polypropylene woofer in a 2-way design.
- Tweeter: The low-resonance, 1" Silk Dome tweeter
recreates high frequencies with reduced distortion.
- Woofer: This
dense, yet lightweight, 6.5" polypropylene woofer can reproduce authoritative bass.
Speaker Terminals: The speaker has a pair of spring clips that can accept up to 12-gauge wire
or pin connectors.
ABS Basket/Frame: The R-2650-C II has a sturdy ABS basket and
frame. The frame can be painted to match any decor.
SlimTrim Magnetic Grille: With an all new grille, the visible frame
size is reduced by 90% and grille depth is reduced by 80% over the previous
design, for a more edge-to-edge consistent look that blends in with the wall
more attractively. The new aluminum, paintable, magnetic grille attaches tightly
and securely with ease to virtually eliminate resonant distortion.
Power Specifications Note: The manufacturer has specified the maximum
power handling of this speaker as 50 watts RMS (200 W Peak). Klipsch has also
published a recommended amplifier power specification as 100 watts.
Installation: The speaker can be installed in new or existing
construction. It requires a cutout diameter of 8.1875". For new construction,
purchase of the IK-650-C installation kit (714IK650C,
sold separately) is highly
recommended. For existing construction, the speaker should be installed in
drywall at least 3/8" thick. It can also be installed in a drop ceiling (2' x 2'
or 2' x 4' ceiling tiles only). In both cases, to maximize the acoustic
performance of the in-ceiling speakers, Klipsch recommends you replace the
original mounting panel with 1/2" or 3/4" plywood or MDF. A cardboard template
is included to assist you in making the cutout.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.