High Efficiency: The high-efficiency design of the Klipsch
in-wall speakers allows you to get much more output than most in-wall and
in-ceiling speakers. Due to the long speaker wire runs that are common in
whole-house audio systems, the power coming from the amplifier is significantly
reduced by the time it reaches the speakers. The 92dB efficiency of this speaker
means it will play much louder at low power than other less-efficient speakers.
Two-Way Speaker Design: use The Klipsch R-3650-W II uses a
rigid 1" aluminum compression driver (tweeter) mated to an exclusive Tractrix
Horn, combined with a 6.5" IMG woofer in a 2-way design.
- Tweeter: A 1" aluminum dome compression tweeter mated
to a 6" square, pivoting Tractrix Horn, which disperses the sound 90°
horizontally and 60° vertically into the room. The horn design dramatically
increases efficiency by enabling the speaker to produce more output using
less energy. The pivoting horn-loaded tweeter allows you to point the sound
to a specific location, and has more controlled directivity than a
conventional dome tweeter. The addition of a Linear Travel Suspension to the
tweeter increases high frequency detail and smoothness.
- Woofer: The in-wall speaker employs a copper-colored
6.5" IMG (injection molded graphite) woofer. The solid IMG woofer cone has
been strengthened for even more accurate bass reproduction.
Tweeter Attenuation Switch: If the speaker is installed in
an acoustically bright room, such as a bathroom or a kitchen, you can attenuate
the tweeter by -3dB, using the Tweeter Attenuation Switch, located on the front
of the speaker.
ABS Basket/Frame: The R-3650-W II has a sturdy ABS basket
and frame. The frame can be painted to match any decor.
SlimTrim Magnetic Grille: With an all new grille, the
visible frame size is reduced by 90% and grille depth is reduced by 80% over the
previous design, for a more edge-to-edge consistent look that blends in with the
wall more attractively. The new aluminum, paintable, magnetic grille attaches
tightly and securely with ease to virtually eliminate resonant distortion.
Speaker Terminals: The Klipsch R-3650-W II in-wall speaker features
two spring-clip terminals which will accept bare speaker wire (up to 12-AWG) or pin-connectors.
The spring-clip speaker terminals are color-coded (red/black)
for easy identification between positive and negative.
Power Specifications Note: The manufacturer has specified the maximum
power handling of this speaker as 50 watts RMS (200 W Peak). Klipsch has also
published a recommended amplifier power specification as 100 watts.
New Or Pre-Existing Installation: The speaker can be installed in new or existing
construction. It requires a cutout of
7.9375" (w) x 13.0625" (h), with a mounting
depth of 3.6875". For new construction,
purchase of the IK-650-W installation kit (714IK650W,
sold separately) is highly recommended. For
existing construction, the speaker should be installed in drywall at least 3/8"
thick. A cardboard template
is included to assist you in making the cutout.
IR Knockout: A 1/2" diameter knockout panel is provided in
the lower left hand corner of the speaker frame for installing an IR sensor.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.