Why Choose Crutchfield?
Great gear and expert advice
Our experts help you pick the ideal gear for your needs.Meet our advisors
Free tech support for the life of your gear.Read about our one-on-one expert help
You may return items that are complete and like new for any reason within 60 days.See the details of our return policy
Earn one point for every dollar you spend and use those points to save on future purchases.Get full details on Crutchfield Rewards
Deep discounts on car installation gear
We offer vehicle-specific installation instructions, dash kits, wiring harnesses, and speaker accessories at deeply discounted prices with car stereo and speaker purchases. Available for most vehicles.Learn more
Trusted since 1974
Our customers have trusted us with their business, and they’ve helped us win awards for our service.Check out our most recent awards
The manufacturer’s warranty always applies.See more details
Klipsch Reference RC-64 II
Center channel speaker (Black)
Item # 714RC64IIB | MFR # 1011861
$1,189.99 each Earn up to 1,190 Rewards points
Our take on the Klipsch Reference RC-64 II by Crutchfield's Kristen Schaub
Klipsch's best Reference Series II center channel speaker
Every great home theater experience starts with a superior center channel speaker. Ranging effortlessly from high to low, Klipsch's RC-64 II center channel will flat-out knock your socks off. Using patented Klipsch speaker technology, it creates rich, dynamic sound with nuanced dialogue and powerful, full-bodied lows. Add it to a pair of Klipsch's flagship RF-7 II floor-standing speakers and get ready for total immersion in every movie, every night. And the big bonus: the RC-64 II comes in a truly stunning, furniture-grade wood grain veneer.
Horn technology for "front row" sound
All Reference Series II speakers feature a redesigned version of Klipsch's famous horn-loaded tweeter. Because high-frequency sounds are more directional than bass frequencies, it's especially important to target them right toward your ears. Klipsch places their titanium tweeter inside a flared opening, known as a "horn," which disperses the highs evenly across your listening area in a 90°-wide, 60°-high pattern. With their Series II speakers, Klipsch has redesigned the shape and slope of their famous horn enclosure, so your movie soundtracks and music will sound more "open," with improved dynamics and efficiency. All in all, you can count on powerful, "front row" sound that's crystal-clear at all volume levels.
High-tech driver design
The RC-64 II houses not one, but four light, rigid Cerametallic woofers. They're updated design gives them a folded edge to produce smoother mids and tighter bass to complement your movie soundtracks. The specially treated aluminum in the cones helps to dampen vibrations and reduce distortion, while integrated dustcaps add stability and give them a cleaner look. The RC-64 II also has dual sets of five-way binding posts, giving you the option to bi-amp or bi-wire this speaker for even better performance.
The one word for all the Klipsch Speakers that I have purchased would be OUTSTANDING.
Joe, Salem, SC
What's in the Box:
- Black center channel loudspeaker
- Detachable grille
- Rubber tipped bolt (with nut and washer attached)
- 6 Self-adhesive rubber feet
- Owner's Manual
Scratch & Dent items may be missing non-essential accessories. In some cases the manufacturer's accessories have been replaced with generic equivalents.
- frequency response 59-24,000 Hz (±3dB)
- power handling: up to 200 watts RMS (800 watts peak)
- sensitivity 99 dB
- 8-ohm impedance
- Tractrix® horn with 1-3/4" titanium dome tweeter
- four 6-1/2" Cerametallic woofers
- Klipsch Tapered Array eliminates acoustic interference between woofers for accurate sound
- dual binding posts for bi-amping or bi-wiring
- acoustic suspension (sealed) design
- video-shielded to prevent distortion with tube TVs
- includes a tilt rod for placement above or below seated ear height
- furniture-grade black ash wood veneer
- 35-13/16"W x 8"H x 13-1/4"D
- warranty: 5 years
- Our 60-day money-back guarantee
Klipsch Reference RC-64 II Reviews
Average Customer Review(s):
Thanks for submitting your review
Features and Specs
|Midrange size (inches)||---|
|Woofer size (inches)||6-1/2|
|Connector Type||Binding post|
|Frequency Response||59-24k Hz|
|Parts Warranty||5 Years|
|Labor Warranty||5 Years|
Highly-Efficient Design: The Klipsch RC-64 II utilizes a highly efficient design to produce more output using less power & energy for louder sound with less distortion. The RC-64 II is able to fill larger rooms with outstanding, accurate, non-fatiguing sound that you can listen to for hours.
Tractrix Horn Tweeter: The RC-64 II features an exclusive Tractrix Horn which provides a more genuine, lifelike sound. In addition, behind each horn lies a 1.75-inch titanium tweeter with a linear travel suspension for open, natural, sound. The Tractrix Horn delivers a 90-degree wide by 60-degree high dispersion pattern for a broader sound-stage.
Cerametallic Woofer: The quad 6.5-inch woofers of the RC-64 II center channel loudspeaker features Klipsch's distinctive, copper-colored Cerametallic material. Made with an anodized aluminum, this cone is strong and dent resistant. The anodizing process converts its inner and outer surfaces to ceramic. The outcome is a rigid cone with superb damping characteristics that will not flex or resonate at frequencies within the woofer's operating range The 6.5-inch woofers also employ a rubber surround for added durability.
Crossover Network: The Klipsch RC-64 II's crossover network is constructed using extremely high-quality components including top-of-the-line internal wiring, polyester film-type capacitors and an air-core inductor to ensure signal purity and proper driver integration. The speaker's enhanced crossover frequencies offer smoother on-axis and off-axis integration.
Acoustic Suspension Enclosure: The four 6.5-inch Cerametallic cone woofers and 1.75-inch titanium diaphragm compression driver are mounted in a sealed enclosure for tight, accurate sound. The sealed cabinet features increased baffle ribbing around the horn mouth and woofers to dramatically improve acoustics across the sonic range. The sealed enclosure features an MDF cabinet finished with a beautiful furniture-grade wood veneer and an aluminum front baffle. The RC-64's rigid cabinet offers improved internal cross-bracing to minimize panel vibrations that can color sound.
Detachable Grille: The center channel loudspeaker features a removable grille which easily snaps into place over its cast-aluminum front baffle. The speaker can be used with or without its grille in place.
Dual Binding Posts: The center channel speaker has two sets of binding posts connected by jumpers. Using the dual binding posts, you can bi-amp or bi-wire the speakers. The binding post terminals will accept banana plugs (single only), pin-connectors, spade-connectors, and bare wire.
Magnetically Shielded: The Klipsch RC-64 II center channel loudspeaker is magnetically shielded to prevent video interference.
Placement: The RC-64 II should be centered directly above or below your video screen. If necessary, you can place the speaker on an optional floor stand in front of and below the screen that elevates it to the correct height. Ideally, however, the speaker's front baffle should be flush with the front of the screen.
Rubber Feet: The center channel speaker comes with six self-adhesive rubber feet to secure the speaker in place and prevent any damage to your stand's or shelf's surface.
Note: The rubber feet add approximately 0.3125" to the height of each speaker.
Adjustable Angle: If the center speaker is well above or below the ear height of seated listeners, you can improve performance by angling the center channel slightly to compensate. Included with the speaker is an adjustable foot that you can screw into one of the two threaded inserts on the bottom of the cabinet. To tilt the speaker down, install the foot in the insert near the back of the cabinet; to tilt the speaker up, install the foot in the insert near the front of the cabinet.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
Why did you buy this?
Wanted fuller sound than we were getting from the previous center channel speaker. Have been very pleased with this purchase. [ Timothy Apr 05, 2017 ]
To compliment my RF-82 II!!! [ Nicholas Nov 27, 2016 ]
My Klipsch 450ca center speaker wasn't doing it for me in my very large home theater. I decided to upgrade the center to Klipsch's top of the line center speaker. The center speaker is the most used speaker of a home theater, may as well use the best of the best. Its like paying extra for a really good mattress - you spend 1/3 of your life sleeping! [ Adam Jan 19, 2016 ]
add to the RC7ll I just purchased. and my mummy (wife) said I could! [ Johnnie Jan 13, 2016 ]
nice [ james Dec 31, 2016 ]
The best center channel for movies [ TUOC Jun 08, 2016 ]
2 questions already asked
Hi,first of all you are looking at a serious speaker,very serious.. rms rating is 200 watts with 800 watt peak. I'm not sure what kind of tv you have,but most of the avrs today only produce 125 watts per channel. I can recommend the speaker,but you need something that will really bring it to life if your going to enjoy what this speaker is capable of. Not sure what your budget is, but if I were you I'd at least purchase an avr from crutchfield with minimum 125 watts. You can find that denon and marantz both make good products. And this will also give you the ability to add more speakers in the future. Hope this helps. [ ROBERT M May 21, 2017 ]
No, you will need to purchase an Audio Video (A/V) Receiver or what I call separates, a Preamp and Amp. There are many brands out there. Some decent mid level brands are Denon, Onkyo, Marantz and Yamaha. However, if you have the money to spend $1400.00 on a center channel speaker I would do some research and plan on buying a decent Receiver. I'm thinking you want a surround sound system to give you that theater like sound. If that is the case I would suggest at least 5 additional speakers; a set of front speakers (left & right) in addition to that Center Channel speaker (RC-64) you have and 2 surround back speakers. A complete surround sound set of speakers would entail a Center Channel, 2 Front speakers (left & right) and 2 surround back speakers plus a subwoofer; this setup would be a 5.1 surround sound setup. If your money is limited and you want a set of speakers to hook directly to your TV then I would suggest you forego that RC-64 Klipsch @ $1400.00 and take look at sound bar. [ William May 21, 2017 ]
This isnt a sound bar. You will need an av reciever. The speaker only has binding posts on the rear for speaker wire. [ Brock May 20, 2017 ]
We would not recommend this because placing the TV on this type of speaker would increase the likelihood of the TV tipping over. [ Jeff Sep 28, 2015 ] Staff
The RC-64II weighs 51 pounds itself so I'm not sure about the weight distribution on the TV stand. Klipsch is pretty good about responding so I would recommend getting their feedback before doing anything "final". [ DAVID W Sep 28, 2015 ]
This isn't something that manufacturers rate in their specifications, obviously. And I'm not willing to bust mine to find out BUT.... it feels extremely durable and rugged. My inclination is to give it a try. I would make one suggestion. As the base of the TV is smaller than the speaker (I assume), it would be nice to spread out the load from the TV base across the entire speaker frame by putting a black board across the speaker before loading the television. Make sure that the board reaches the end walls of the speakers(where there is more structure). Secondly - couldn't help myself - don't use a flimsy particle-board premade shelf. Paint an actual 1x6 or 1x8 as they are stronger in compression than particle board. I say go for it - carefully. If you buy some extra few inches of 1x6" or 1x8" and make two 'legs' for your board that are just wider than the speaker box, then you're REALLY unloaded most of the weight from the speaker and only added 1" on the top and sides and have no worries. [ David Sep 28, 2015 ]
NO. Speaker is not a perfect rectangle; check a Klipsch inline manual for exact dimensions. Also sounds wobbly. [ David Sep 28, 2015 ]
likely not - the wood veneer is relatively thin and looks so nice you won't want to damage it. a wall mount was a good option for my setup. the speaker box itself is pretty stout - likely it would do fine holding your tv - it is only the veneer i'd be worried about [ vincent Sep 28, 2015 ]
Yep [ JUDSON Sep 28, 2015 ]