Solar-Power Light: During the day, the solar panel included with the
MAXSA Solar Security Light converts sunlight into electricity, recharging the
pre-installed battery. Using this stored energy, the Security LED light turns on
automatically at night when motion is detected. This Solar Security Light is
ideal for areas where electricity is not available (including driveways,
carports, garages, and entrance doors) for safety and security around your home.
LED Lights: The MAXSA Solar Powered Security Light features
100 LED lights that will last up to 30,000 hours and should never need
Motion Sensor: The MAXSA Solar Powered Security Light is equipped with
a built-in motion sensor. The passive infrared (IR) motion sensor turns the
Solar Security Light on automatically when motion is detected. The sensor can
detect motion within a 180° horizontal angle
and a distance of up to 35'. The motion sensor of the Solar Security Light is
temperature sensitive. The cooler the temperature, the more sensitive the motion
sensor will become. Use the Sensitivity dial to adjust the sensitivity of the
motion sensor to compensate for environmental temperature changes.
Light Level Adjustment: The LUX dial controls the natural light that
triggers the Solar Security Light and prevents the light from operating during
daylight hours. The Solar Security Light comes preset for activation at dusk.
You can adjust the LUX dial for activation in a brighter or darker setting.
Time Dial: The MAXSA Solar Security Light has an adjustable Time dial
that allows light duration of up to 60 seconds.
Rechargeable Battery: The battery included in this unit is a sealed
lead-acid 6V/4Ah rechargeable battery. When the battery is fully charged, this
Solar Security Light can light up for up to 2 hours, which is equivalent to 120
one-minute cycles when the Time dial is set the maximum position. The battery
should last for approximately 3 years before it will need to be replaced. Replacement batteries
are available directly from the manufacturer (maxsainnovations.com).
Note: During the initial charge period, leave the light off
while the solar panel charges in direct sunlight for 3 days.
- Security Light: The security light features an integrated
mounting bracket which allows you to mount the light to a wall or roof
(using the included hardware). You may mount the security LED light either
vertically or horizontally. The mounting bracket allows you to adjust the
angle of the light to where you need it most. The security light also comes
with mounting straps to attach the light to a flag pole. The security light and
solar panel connect to one another via the solar panel's attached15' power
- Solar Panel: Mount the panel facing South, which will
maximize the direct sunlight exposure during the day. For optimum sun
exposure and longer light output, place the solar panel where it will
receive 6-8 hours of direct sunlight per day. Mount the solar panel with the
enclosed screws to a solid wood or metal surface. You can adjust the angle
of the solar panel by gently rotating to a different locking position.
Placing the panel in a shaded location will no allow the batteries to charge
fully, reducing the number of hours the light will operate per evening.
- Security Light:
- LED Light: 7.5625" (W)
x 4.5" (H) x 2.25" (D)
- Bracket: 7.0" (W) x
5.125" (H) x 4.1875" (D)
- Solar Panel:
- Panel: 8.1875" (W) x 6.25" (H) x 0.625" (D)
- Bracket: 4.125"
(D) x 3.625" (H) x 2.375"
- Power Cord: 15' (L)
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.