Skip Navigation


Stereo power amplifier

23 Reviews | 1 question - 1 answer

Item # 745C275BEE

In Stock

Add to Cart

Ask an expert

Our VA-based experts can help.




Our take on the NAD C 275BEE

NAD designed the C 275BEE power amplifier from the ground up to deliver the best possible performance in its price range. With a conservative 150-watt-per-channel rating, this potent amp generates the kind of power you need to drive virtually any speaker system with ease. Match it with the NAD C 165BEE stereo preamplifier to create a sound system capable of impressive dynamics, musical detail, and transparency.

NAD designed the C 275BEE power amplifier from the ground up to deliver the best possible performance in its price range. With a conservative 150-watt-per-channel rating, this potent amp generates the kind of power you need to drive virtually any speaker system with ease. Match it with the NAD C 165BEE stereo preamplifier to create a sound system capable of impressive dynamics, musical detail, and transparency.

Advanced technology for stunning sound
The C 275BEE employs many of the same high-end features found on NAD's top-of-the-line Master Series components, including NAD's exclusive PowerDrive™ technology. This unique circuit automatically senses your speaker's impedance, then optimizes the amp's power supply settings to deliver the most dynamic power possible. This allows it to easily drive low-impedance loads, including many of today's high-end speakers, which often run closer to four ohms than eight. Plus, a patented distortion-canceling circuit in the amp's output stage ensures your music stays clean and pure.

A strong, vibration-resistant build
Along with all of its advanced technology, NAD gave the C 275BEE a big helping of good old-fashioned construction quality. This amplifier boasts a heavy-gauge steel chassis for added durability and vibration resistance. Its power supply, the heart of any amplifier, utilizes an interference-canceling toroidal transformer and heavy copper buss bars to channel enormous amounts of current to the custom gold-plated speaker binding posts. Additional premium-quality internal components — such as four pairs of discrete high-wattage output transistors per channel — allow the C 275BEE to handle prolonged high-power operation effortlessly.

Product Highlights:

  • 150 watts x 2 channels into 8 ohms (20-20,000 Hz) at 0.008% THD
  • 4-ohm stable for use with a wide range of speakers
  • signal-to-noise ratio: 102 dB
  • PowerDrive™ circuit with automatic speaker impedance sensing delivers maximum dynamic power output regardless of speaker load
  • switchable Soft Clipping™ circuit gently limits amplifier power output to reduce risk of speaker damage due to prolonged high volume operation
  • distortion-canceling circuit for high-accuracy sound
  • high-current toroidal power transformer
  • all-discrete circuitry with four pairs of high-wattage output transistors per channel
  • 1 pair RCA preamp inputs (switchable fixed or variable)
  • two pairs of custom gold-plated speaker binding posts
  • bridged mode for mono operation (330 watts x 1)
  • 12-volt trigger input
  • detachable AC power cord
  • <1W Standby Power Consumption
  • free of lead and other environmentally dangerous substances
  • weight: 32.2 lbs.
  • 17-1/8"W x 5-15/16"H x 16-1/16"D
  • warranty: 2 years
  • Our 60-day money-back guarantee

I purchased this amp to replace my older NAD214. This new amp is amazing! More power than I'll ever need and clear, open sound from the lowest notes to the highest. My Monitor Audio speakers have really come to life.

Anonymous, Scotts Valley, CA

What's in the Box:

  • Amplifier
  • 6' Power cord
  • Owner's manual (English/ French/ Spanish/ Italian/ German/ Dutch/ Swedish/ Russian)
  • Warranty information

NAD C 275BEE Reviews

Average Customer Review(s):

(23 Reviews)

Quiet Giant!

Norm from Bridgeport, CT on 6/21/2017

Crutchfield Customer Review (What's this?)

I've owned lower-powered NAD integrated amps before and was very satisfied, but this time, I decided to take a chance. I wanted the power and dynamic headroom of a truly powerful stereo amplifier, and I don't need five or six or seven channels, just two, so the 275BEE seemed like a good choice. But, I had a less-satisfying experience with a power amp many years ago when I purchased a 200 watt per channel behemoth which had awesome power but was extremely noisy, with a hiss that invaded the music at just about any listening level. However, I can say that the 275BEE is everything that other amp was not. Yes, it has awesome power and dynamic headroom, but it is very quiet. I have it mated to a NAD 165BEE preamp, and unless there is signal, you simply cannot tell it is on. Even placing my ear at the tweeter of my speakers, I hear nothing. In other words, very well designed. It is physically quite heavy, but the extra bulk is a by-product of all that power. I placed it on a reinforced stereo cabinet shelf. I recommend this amp to anyone wanting power and quality.

Pros: Very powerful and very quiet

Cons: Heavy, but that comes as a necessary part of all that power.

Serious Power Amp for the Money !

Dan from Canton, MI on 6/18/2017

Crutchfield Customer Review (What's this?)

I had read the reviews on this amplifier, and decided to it was time to upgrade my system, starting with a power amp. I went from a 70 WPC receiver, to a150 WPC amp + preamp. I must say, this amp is remarkable. The detail is amazing. Bass is much tighter, accurate, with a punch, but not boomy. Vocals are clear and crisp, guitars, drums, pianos, brass and woodwind instruments sound like the real thing, the way you would the think they should sound. They have really brought my JBL4311b's to life. I could not be happier with this purchase. Crutchfield is amazing. I have bought several pieces of audio gear from them. 100% satisfied with each purchase.

Pros: As much CLEAN and DETAILED Power as you could ever want from a power amplifier in this price range. Excellent value.

Cons: Would not change a thing.

NAD C275BEE Amplifier, Clear and Precise

Adrian from Johns Creek, GA on 5/30/2017

Crutchfield Customer Review (What's this?)

I am using the NAD stereo power amplifier to drive two front tower speakers, mostly to listen to hi-res music. Since I am using the front speaker pre-out ports on my AVR to provide the input for this amplifier, when not listening to music, this setup is used when I watch movies in a 7.4.2 setup. The NAD C275BEE power amplifier brings a high level of clarity to my music due to its 150 W per channel , low distortion levels of 0.008% THD outputs over the full 20 to 20,000 Hz range. It complements my 4 ohms tower speakers by being able to deliver clean, precise power to meet the demands of those speakers. The amplifier seems to be well built and its sturdy robust housing protects the high quality electrical components housed inside. The music/sounds coming from my speakers are much clearer and fuller, with more body and precision.

Pros: Supports 4 Ohm speakers; has high signal to noise ratio of 102 dB; employs signal clipping to protect the amplifier from being over driven; automatic signal triggering feature to turn it on; sturdy chassis and housing; easy to setup and use. After 5 hours of use, the amplifier's housing is only luke-warm, that says a lot about the quality of this amplifier.

Cons: No remote control or capability to use one. No other negative observations.

Great clean sounding and looking amp

Hartmut from Chicago, IL on 4/24/2017

Crutchfield Customer Review (What's this?)

After 20 years of use my NAD 280THX amplifier called it quits. Since I like NAD products and also have an NAD preamp, I opted for the C 375BEE and I am very happy with it. It does not have the power of my former amp (250 vs150 W) but enough to drive my Legacy Classic HD speakers. I found it sounds cleaner and more detailed.

Pros: Bi-wire capability. Clean, detailed and open sound.

Cons: None so far.


Anonymous from Scotts Valley, CA on 2/19/2017

Crutchfield Customer Review (What's this?)

I purchased this amp to replace my older NAD214. This new amp is amazing! More power than I'll ever need and clear, open sound from the lowest notes to the highest. My Monitor Audio speakers have really come to life.




Chris from Escondido, CA on 12/2/2016

Crutchfield Customer Review (What's this?)

Love this AMP! Replaced an old McCormack Power Drive, major improvement.

Pros: Great sound.

Cons: Non

So clean and so powerful.

BR from Stevens Point, WI on 7/23/2016

Crutchfield Customer Review (What's this?)

When i read the specs i was like, ah come on; 150x2 at 0.008... no way. i called my dad up, asked him if he ever heard of such a thing. he said nope, so i ordered it up. i can't believe how clear and powerful. i hooked it up to my klipschorns and they can pick up anything, and there is nothing at max volume paired up with the preamp from NAD

Pros: clean and simple look, MASSIVE power and i trying to melt it but she just keeps throwing clean power.

Cons: ahhhhh, absolutely nothing.

The Next Level

J.B. from hixson, TN on 1/29/2016

Crutchfield Customer Review (What's this?)

I've been driving my speakers with a THX rated receiver for several years and pleased with the performance. After a serious speaker upgrade, I wondered how much better they could be with a serious amp. In a word, WOW. The difference was striking and immediate. The sound lives up to the specs. Power to spare and clean. Need a stereo amp? Look no further. This is it.

Pros: Fantastic.

Cons: None.

NAD Products

Martin from Alabama on 12/30/2015

Crutchfield Customer Review (What's this?)

NAD makes a great product. Very happy.



No Frills...Good High-Quality Power

CharlesL from Stone Mountain, GA on 11/3/2015

Crutchfield Customer Review (What's this?)

Got power amp to pair with my Yamaha AVENTAGE RX-A850 receiver/ drive my front Polk LSIM 707s. The additional power was what I was looking for to really bring out the best of the LSIMs. And the NAD has done just that. It had been almost 15 years since I've upgraded any of my audio components, but I feel this NAD amp will be a part of my configuration for a long time.

Pros: Easy to connect, great value, and awesome performance.

Cons: Manual only power switch.


adavis from Jackson,Wyoming on 11/30/2014

Crutchfield Customer Review (What's this?)

Came in 3 days plugged it in works perfectly. My speakers have full sound again.

Pros: Sound and power!

Cons: Non

Great Amplifier

Dr. Jim from Grand Island, NE on 5/3/2014

Crutchfield Customer Review (What's this?)

This amplifier is a quality product with plenty of very clean power to do any system justice. I recommend it highly.



NAD convert

Sled guy from New Hampshire on 4/16/2014

Crutchfield Customer Review (What's this?)

I recently added a NAD 275BEE to my NAD 758 to power the front Definitive 8060's. My home needs full power to fill the room. The combination of these units is flowing and incredible. The NAD's have a warmth and clarity that exceeds my expectations. The 275 is configurable to match the volume other speakers that are driven by the 758. The setup was easy, quick and works perfectly! After trying other amps, I am finally a "happy camper"!



Well Worth It!

Brent from Lakeland, FL on 4/13/2014

Crutchfield Customer Review (What's this?)

Researched 2-3 years to replace AMP I bought in 1985 at NATO exchange Naples. Hitachi 100 watts THD .0005 driving front Klipsch Heresys {100 wt. 300 peak} & rear Klipsch RF IIs {150/600}. I use no tone control and Digital DBX, not for expansion but Impact restoration for older recordings or those that need some Bass oomph. Around 80 watts highs blurred and sounded muddled. Was suggested I obtain a more powerful amp to increase headroom and have necessary power for speakers demands. It only took 3 songs and I new the NAD had found a home. Clarity of highs at volume outstanding. The speakers can breathe so much better now. Looked hard at ROTEL, Para sound, & Vincent. Totally stoked with purchase.



Nice Moderately Priced Stereo Amp

EssDee from Frederick, MD on 2/13/2014

Crutchfield Customer Review (What's this?)

When I needed to replace my aged Adcom amp, I was dismayed to see few offerings in the $750-1500 price point in "200"W stereo amps. Lots of mortgage-breaker stereo amps and gazillions of affordable multi-channel amps. Did some research and found a couple candidates, and the NAD rose to the top. I've paired to stereo output of an Integra preamp with input from Oppo 105d player and vintage Yamaha turntable w/ Signet 112E moving coil stylus and powering Thiel 2.2 floor standing speakers. Very clear sound even when pushed hard with high quality live recordings (Ry Cooder & Corridos Famosos) and various SACD and vinyl recordings. I was amazed at low heat emission.

Pros: High quality, fairly priced, nice clean design Nice clean sound

Cons: none other than not available in silver/aluminum finish

nice amp

tridosko from castle rock co on 2/3/2014

Crutchfield Customer Review (What's this?)

Love this amp - what else can you say

Pros: clean , warm sound with power to spare . Great value at the price point . Would certainly buy this one again ! Great combo with the NAD pre-amp

Cons: not one complaint here

Clean sound

KrisK from Los Angeles on 12/7/2013

Crutchfield Customer Review (What's this?)

I've paired this with a Thorens 166 Turntable, a NAD 7240PE preamp to drive some new beautiful Spendor A 5 speakers. Very happy.



Works like a charm

BobS from Gaithersburg MD on 7/21/2013

Crutchfield Customer Review (What's this?)

Drives my Martin-Logan electrostatics flawlessly

Pros: Excellet stability into capacitatve loas

Cons: Canno be run in bridged mode into 4 ohm load

Open Box AMP not up to it

Sorval from Davis, CA on 10/5/2012

Crutchfield Customer Review (What's this?)

I gave the product 3 stars just because of its excellent reputation. However, I bought an open box amp hoping to save a few bucks, but it never worked philosophically or physically. I bought the amp because I was starting to hear noise coming from the center channel of my 5.1 system (Integra 40.1 processor, 3 Adcom 545II amps, front channel Polk LSi 9's, rear channel Polk LSi 7's , center channel Polk LSi C, Velodyne subwoofer, and 2 Monster Power conditioners). So I was looking to replace the center channel amp with another good amp. Hence, I liked the NAD amp because the web site literature said it was bridgeable which would be perfect for a center channel application. However, when I got the amp and read the manual, it said bridging is strongly discouraged for anything lower than an 8 ohm speaker impedance do to over heating issues. All Polk speakers including the center channel are rated at 4 ohm. Not a good start. Well then, I decided to hook the amp up as my current set up, running in stereo mode with just one channel input and output to the center channel. Before any signal passed through the amp, it began clipping and its safety circuits cut all output. Put my old NAD 545 amp (bought in the 80's, a real work horse) back into the system and it worked fine, albeit, with the audible noise that had propted me to buy the NAD amp. Now NAD makes good products (that's why I bought it) so my conclusion was not be cheap and buy open box items.



NAD C 275BEE is an excellent choice

PaulS from Joliet, IL on 7/18/2012

Crutchfield Customer Review (What's this?)

I bought the NAD amp to replace my very old Phase Linear 400 which finally died. I am completely satisfied with the NAD. The amp is well built, looks great and sounds fantastic. After connecting the amp I liked the sound immediately. I noticed a huge improvement in my system's clarity and the NAD has given me a new appreciation of my stereo . I highly recommend this unit.




DanH from Hamilton, NJ on 3/28/2012

Crutchfield Customer Review (What's this?)

In the process of revamping my system I sadly found that my Denon POA-2200, that I purchased back in 1987, had gone on the fritz. I had just recently purchased the NAD C 165BEE preamp so I opted to purchase its sister amp, the NAD C 275BEE. I honestly could not be happier with this combination. I have the amp driving a pair of Klipcsh RB61 bookshelves and with this combo you would swear you were listening to a pair of 80Lb floor standing units. Crisp highs and midrange and surprisingly thunderous lows for speakers this size. Sound is clean and clear at all volumes, cd's and vinyl.

Pros: Everything, especially the price.

Cons: none

cant do better

dj from pensacola, fl. on 5/18/2011

Crutchfield Customer Review (What's this?)

useing this to power 2 JBL 880 speakers. At half volume the speakers sound like they are ready to explode. but thats what you want this kind of power will give you very clean loud power without maxing the volume. A little pricey but if you look at there high end units at over 3000 it is a real deal



Very happy with my NAD C275BEE

CW from Orlando, FL on 3/4/2010

Crutchfield Customer Review (What's this?)

I replaced my old Sony N80ES power amp and immediately noticed a big difference. I have it paired with an Onkyo TXNR807 AV Receiver and high quality speakers and am very happy with the result. This amp does my speakers justice. The unit is of sleek design and doesn't generate anywhere near the heat my old Sony did.




Hands-on research

Product Research



Soft Clipping: NAD's Soft Clipping circuit gently limits the output of the C 275BEE to minimize audible distortion when the amplifier is over-driven. While Soft Clipping can be left on at all times to reduce the likelihood of audible distortion from excessive volume settings, you can also turn the circuit off for critical listening if you prefer.

Bridgeable: The C 275BEE can be bridged to a single channel, more than doubling the power output. When bridged, the minimum recommended speaker impedance is 8Ω.

A/B Speaker Terminals: The amplifier features A & B speaker terminals to power two pair of loudspeakers. The amplifier supports 4Ω speakers when only one pair is connected, however, when two pair of speakers are connected a minimum impedance of 8Ω is recommended.

Input Select: A switch on the rear panel allows you to set the input to Fixed or Variable. In the fixed position the input signal is routed directly to the amplifier; typically used in single amp systems, or when multiples of the same amp are used. The variable position allows you to adjust the input level before amplification, useful when matching output levels in a multi-amp system, bi-amping speakers, or extending the volume control range of the preamp.

Auto Turn-on: The C 275BEE can be turned on automatically one of two ways; +12 volt trigger from another component or by sensing an input signal.


Rear Panel:

  • Input Select: choose Fixed or Variable (variable allows volume adjustment using the Input Level dial)
  • Input Level: rotary dial; adjusts volume to match another amplifier
  • Bridge Mode: switch between stereo and mono amplifier output
  • Soft Clipping: turn the Soft Clipping circuit on/off
  • Power: master power switch
  • +12V/Input Sensing: choose +12 volt trigger or signal sensing to automatically turn the amp on


Rear Panel:

  • Speakers: the speaker binding posts will accept single banana plugs, pin connectors, spade lugs up to 0.625" wide, and bare wire up to 10 gauge; there are four speaker outputs, A (left and right) and B (left and right); when powering two pair of speakers a minimum impedance of 8Ω is recommended
  • Signal Input: stereo RCA input jacks
  • 12 Volt Trigger: turn the amp on/off along with another device that has a +12 volt trigger output
  • AC Input: 2-pole IEC power input for use with included cord (or optional upgraded cord)


Amplifier Section:

  • Continuous Power: 150 watts x 2 into an 8Ω or 4Ω load, 20 Hz - 20 kHz, no more than 0.008% THD, both channels driven simultaneously
  • Continuous Bridged Power: 330 Watts x 1 into an 8Ω load, 20 Hz - 20 kHz, no more than 0.02% THD
  • Dynamic Power:
    • 8Ω: 250 watts x 2
    • 4Ω: 410 watts x 2
    • 8Ω Bridged: 800 watts x 1
  • Rated THD (Total Harmonic Distortion): <0.008% (driving both channels 20 Hz - 20k Hz simultaneously at 8Ω)
  • Signal/Noise:
    • >102 dB (A-weighted, ref 1 watt)
    • >123 dB (A-weighted, ref 150 watt)
  • Damping factor: >180 (ref 8Ω, 50 Hz and 1 kHz)
  • Frequency response:
    • +/- 0.1 dB: 20 Hz-20 kHz
    • - 3 dB: 3 Hz-100 kHz
  • Input impedance:
    • Fixed: 10 kΩ + 200 pF
    • Variable: 100 kΩ + 100 pF
  • Input sensitivity: 1.2 volts (ref rated power)
  • Voltage gain: 29 dB
  • Power Requirement: AC 120V 60Hz
  • Power Consumption:
    • Normal Operation: 312W
    • Standby: <1W
    • Idle: <100W
  • Weight: 32.2 lbs (14.6 kg)

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Q & A

Customer Q&A

Crutchfield asked  
Why did you buy this?

NAD C 275BEE is a top seller. I have not read one bad review about this amp. Last year i did a big upgrade, and wanted to keep it going with this starter audiophile amp.[ EnlightMent  Dec 01, 2016 ]
I have a NAD preamp and tuner. Very happy with the clean sound from them. When my very old Carver amp started acting up, More NAD seemed the logical choice.[ Winsor  Oct 25, 2016 ]
gotta make klipsch happy in a clean way[ Brian  Jun 03, 2016 ]
aligns with the C375BEE PreAmp for extra power[ brian  Mar 14, 2016 ]
Surprisingly favorable reviews, given it's price point.[ Stephen  Dec 31, 2015 ]
Speaker manufacturer recommended[ Charles  Dec 16, 2015 ]
I currently have a Nad C272 just went bad. Nad is a great product is the New Amp. fits the same requirements as the old one. The old amp is 11 years old.[ Martin  Dec 14, 2015 ]
A lot of positive from user reviews.[ KHUONG  Dec 09, 2015 ]

1 question already asked

Sounds like you're describing a bi-amped connection. You'll need to use a preamp out from the receiver as a line level input to the 275BEE. You can achieve a bi-amped configuration with these components, BUT because they have different amplifiers and very likely with a different gain, you may end up with one section of the speaker increasing volume faster than the other. I think the only foolproof way to bi-amp is to use identical amps on both sets of posts.[ JEFF P  Aug 10, 2016 ]