Skip Navigation

PSB Image T6

Floor-standing speaker (Dark Cherry)

21 Reviews | 1 question - 3 answers

Item # 760IMGT6C

This item is no longer available.

Shop all Floor-standing Speakers


Our take on the PSB Image T6

All Image speakers have heavy internal bracing and 1-1/8" thick MDF cabinets to ensure impressively solid, acoustically inert enclosures. These cabinets have a traditional look, but with slightly curved tops and fronts to soften it. This family of speakers also features attractive vinyl finishes, allowing the Image speakers to easily integrate into just about any décor.

Excellent performance...and an exceptional value

Experience the kind of clean, balanced sound that has earned PSB speakers a sterling reputation among high-end audio circles. The Image T6 borrows from driver technologies developed for PSB's sophisticated Imagine family and their top-tier Synchrony speakers, giving you high-end sound at a budget-friendly price. The Image line also features a slightly different cabinet design than its predecessors, showcasing clean lines that won't clutter up your listening room.

Image family

PSB's Image speaker family (Image T6 shown center left)

High-tech drivers produce clean, well-balanced sound

K2 Power crossover network

The tweeter uses a powerful neodymium magnet for crystal-clear highs.

The Image T6 features a 1" titanium dome tweeter that effortlessly dishes out smooth, uncolored highs. The tweeter sits just below the midrange in a unique arrangement that's characteristic of PSB's high-end Synchrony speakers. The long-excursion, high-output 5-1/4" midrange driver and dual 6-1/2" woofers use the same proprietary ceramic-filled polypropylene cones as the Imagine line. The stiff, lightweight cone material helps them deliver midrange that's clean and balanced, with excellent imaging. Each of the woofers is contained in its own ported internal enclosure, which allows for extended, defined bass response uncommon for a speaker of this size.

Sleek, thoughtful cabinet design

All Image speakers have heavy internal bracing and 1-1/8" thick MDF cabinets to ensure impressively solid, acoustically inert enclosures. These cabinets have a traditional look, but with slightly curved tops and fronts to soften it. This family of speakers also features attractive vinyl finishes, allowing the Image speakers to easily integrate into just about any décor.

Got wire?

Most speakers don't include any. Learn about choosing and installing speaker wire at the Crutchfield Learning Center.
Shop our selection of speaker wire.

From the review Rocking the house with the PSB Image T6 speakers

"Ultimately, I think, the test of a great speaker rests on your enjoyment of the music. I had the pleasure of testing the T6s by listening to music and artists I've thoroughly enjoyed for years. Can a speaker make a difference? Can an old tune take on new life? The answer to both is a resounding 'yes.'"

— Marshall Chase, A/V Writer

The best sounding speaker in the tradition of old school big box warmth and bass. These things slam. I measured the response with an RTA- flat down to 35Hz. I do not need a subwoofer- it's up for sale. Great sounding bass, midrange and high end. Good detail. I am very happy.

Tony A, Bartlett. IL

What's in the Box:

  • Floor-standing loudspeaker
  • Grille
  • 4 Rubber tipped leveling feet
  • 4 Carpet spikes
  • Spike wrench
  • 2 Input terminal jumpers (installed)
  • Owner's manual (English/ French/ Spanish/ German)
  • Specification sheet (English/ French/ Spanish/ German)
  • Warranty information

Product Highlights:

  • frequency response: 32-23,000 Hz (±3dB)
  • sensitivity: 91 dB
  • impedance: 6 ohms
  • recommended power: 20-200 watts
  • 1" titanium dome tweeter with neodymium magnets
  • 5-1/4" clay ceramic-filled polypropylene midrange woofer
  • dual 6-1/2" clay ceramic-filled polypropylene woofers
  • dual port, bass reflex design
  • two sets of gold-plated five way binding posts — can be bi-wired
  • dark cherry vinyl finish
  • 7-7/8"W x 40-5/8"H x 15-1/8"D
  • warranty: 5 years
  • Our 60-day money-back guarantee
  • sold individually

PSB Image T6 Reviews

Average Customer Review(s):

(21 Reviews)
rewards card

Submit a review and enter to win a $350 rewards card

Review this product

Thanks for submitting your review

Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

Your Review

Use the stars below to rate the overall product on a scale of 1-5
Upload your photos

Not visible. Email associated with order.
(e.g., Charlottesville, VA)

Additional Fields (optional)


By submitting this review, you agree to our terms and review guidelines.

Filter by rating

Customer photos

<< >>

Hands-on research

Features and Specs

Enclosure Bass Reflex
Finish Vinyl
Color Dark Cherry
Tweeter Dome
Tweeter Size (inches) 1
Midrange Size (inches) 5.25
Woofer Size (inches) 6.5
Woofer Composition Clay/Ceramic/Poly
Woofer Surround Rubber
Built-in Powered Sub No
Video-Shielded No
Connector Type 5-way post
Bi-amp Inputs Yes
Parts Warranty 5 Years
Labor Warranty 5 Years
Power Range 20-200
Frequency Response 32-23k Hz
Sensitivity 91 dB
Impedance (Ohms) 6
Amplifier Power ---
Height (inches) 40-5/8
Width (inches) 7-7/8
Depth (inches) 15-1/8
Weight 48.5 lbs

Product Research

Driver Technology
Enclosure Design
Mounting Options

Driver Technology

Cone Design: The midrange and woofer cones are clay/ceramic filled polypropylene to optimize the combination of stiffness, internal damping, and low mass. The magnetically neutral polycarbonate baskets contribute additional stiffness, and the bullet-shaped phase-plugs enhance linearity at higher frequencies.

Tweeter: The 1" titanium dome, Ferrofluid cooled tweeters use a neodymium magnet structure to help extend the frequency response at both ends for effortless, airy top octaves and smooth, uncolored response.

Crossover Network: The crossover is a 3-way acoustical fourth order Linkwitz-Riley type with a 24 dB/octave slope. The crossover points are 500 Hz and 2,200 Hz.


Binding Posts: The dual binding post input terminals are located on the lower rear of the speaker cabinet. The two sets of binding posts are shorted together by a gold-plated jumper. With the jumper removed the Imagine T6 can be bi-wired or bi-amplified. The binding posts will accept spade connectors, single banana plugs, pin connectors, and bare wire up to 8 gauge.

Mounting Options

Leveling Feet: The Imagine T6 includes two sets of leveling feet; the rubber covered feet are used on a hard surface and add approximately 1/2" to the height of the speaker, the carpet spikes add approximately 1" to the height.


Frequency Response:

  • On Axis @ 0°: 32-23,000 Hz (+/-3 dB)
  • On Axis @ 0°: 45-20,000 Hz (+/-1.5 dB)
  • Off Axis @ 30°: 45-10,000 Hz (+/-1.5 dB)
  • Low Frequency Cutoff -10 dB: 28 Hz


  • Anechoic Chamber: 89 dB
  • Typical Listening Room: 91 dB

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Q & A

Customer Q&A

1 question already asked

In general Klipsch speakers have a unique sound. People tend to either love them or hate them. I have been a big Klipsch fan for many years. That being said, I have a pair of Klipsch RF-83 and a pair of PSB T6. For both purchases, I considered the RF-82, but I really did not like the sound. I felt that the RF-82 did not have a full sound. The PSB T6 speakers sound amazing. If I had to rank the three speakrs I would say RF-83, T6, then RF-82. That being said, speaker sound is completely subjective. It is personal preference and also depends on so many other factors, like how you plan to use them, configuration, room size, etc. So for every person that likes one speaker, someone else will prefer the other. If you haven't listened to either speaker and can't do so, then get the T6. You will not be disappointed with the purchase. [ JASON  Mar 16, 2014 ]
have the rb62 and these PSB after break in sound much better all around. Heard the RF82 in a store and was not impressed. Have a rc62 for center wish I could trade for the psb center. [ Dennis  Mar 16, 2014 ]
tell larry I cannot comment on the klipsch since I have not heard them, but am very pleased with my purchase of the psb speakers. a ton of clean, smooth and neutral sound for not a lot of money. [ TERRY N  Mar 16, 2014 ]