Overview: The icon is a desktop amplifier with a headphone amp
and digital to analog converter built in. There are three inputs, USB (digital),
stereo RCA, and stereo mini-jack, along with a mini-jack line
output and a 3.5mm headphone jack.
USB Input: The USB input is designed to connect to your
computer's USB port, allowing the icon to act as the sound card and amplifier.
The input is a USB Type-B port and a USB Type-A to USB Type-B cable is included.
Analog Inputs: There are two analog inputs, stereo RCAs and
a 3.5mm stereo mini-jack, both on the rear panel.
Speaker Outputs: The amplified outputs are RJ-45 terminals
and speaker wire is included with the amp (with an RJ-45 connector on one end
and two single banana plugs on the other). When using the NuForce S-X speakers,
the wire included with the speakers should be used, which has RJ-45 connectors
on both ends.
- Power: rotary power/volume
control on the front panel; controls the volume
for both the speaker level and front panel headphone
outputs; turn fully counterclockwise to turn the
- Input: rotary input selector
switch; three position, mini-jack, RCA, and USB
- Front: 1/8" headphone; stereo;
compatible with headphones up to 32 ohms; 31.25 mW x 2;
THD 0.03%; 20 Hz-20 kHz
- Power: DC input for use
with included power supply
- Input 1: stereo mini-jack
- Input 2: stereo RCAs
- Input 3: USB Type-B input;
compatible with USB 1.1 and 2.0 (full speed and
high speed); USB cable included
- Speaker Output: left and
right RJ-45 terminals; muted when headphones
are plugged in
- Line Output: stereo mini-jack;
use the icon as a preamp or add a powered subwoofer
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.