Audiophile Components: The Cambridge Audio azur 351R
employs a Toroidal transformer and isolated processing boards for a high purity,
low-distortion signal. The AV receiver's X-Tract near-silent cooling system
combined with a rigid low-resonance chassis maximizes the system's audio signal
5 Discrete Amplifiers: Seven discrete amplifiers driven by a low-flux
toroidal transformer are separated from the processing and input stages
delivering ultra-low noise and distortion, thereby guaranteeing performance
without compromise. This careful design of the amplifier stages ensure that the
can reproduce the dynamics required for movie and music soundtracks. The 5
channel amplifier is rated at 70 watts with 2 channels driven (1kHz, 8-ohms,
0.006% THD) or 50 watts with all 7 channels driven (1kHz, 8-ohms, 0.006% THD).
24-bit/192-kHz DACs: The Cambridge Audio azur 351R
a 192 kHz/24 bit D/A converter on each of the unit's seven channels for
exceptional sound quality. The 192kHz sampling and 24-bit word length
capabilities of the DACs allows you to play high-resolution recordings and hear
the increased clarity, detail and dynamic range of those recordings.
Dual 32-Bit DSPs: The Cambridge Audio azur 351R
employs Cirrus Logic dual
32-bit DSPs for compatibility with the latest Dolby Digital/DTS formats, Dolby Pro Logic/DTS Neo:6
surround processing, and Dolby Pro Logic surround
Note: Dolby Digital and DTS listening modes can only be
selected if your audio source is connected to the AV receiver via a digital
audio connection (HDMI, optical or coaxial). Even though the AV receiver
will decode 7.1channel surround sound (via HDMI), it will only output 5.1ch
surround, because it lacks Surround Back channel speaker outputs.
Matrixed Surround Modes: These modes allow a surround-sound
experience from source material that has no encoding at all. The
surround sound effect is achieved by digital signal processing of
the analog or digital stereo source used. Five modes are possible;
Movie, Music, Room, Theatre, and Hall.
The surround receiver also provides two-channel stereo
playback, as well as an analog stereo direct mode.
Stereo/Stereo + Sub:
Only the front left & front right
speakers (and subwoofer if selected) have output in this mode. If an
analog source is selected, it will be converted to digital via 24
bit A/D converters to allow digital domain sub creation and
bass/treble controls. If a digital source is selected, the 351R
be processing either LPCM stereo (from the digital outputs of a CD
player for instance) or a Stereo downmix of DD or DTS material (from
the digital output of a DVD player for instance).
Analog Stereo Direct:
Selects the analog inputs for the
current source directly with no A/D conversion, DSP processing,
Bass/Treble, or subwoofer channel active. Provides the very best
fidelity for analog Hi-Fi source equipment. In this mode the 351R
acting just like a normal Hi-Fi integrated amplifier.
Dolby Pro Logic II Music Settings: While listening in the
Dolby Pro Logic II Music format, there are three further enhancements
you can adjust.
- Panorama: A Prologic
II mode that extends the front stereo image to the surround sound
speakers for a more enveloping experience. This mode can be either On/Off.
- Dimension: Allows
gradual adjustment of the center image from being produced only by the
Center speaker (Setting 0) through levels of being spread between the center
channel and left and right speakers to finally being produced by the front
left and right speakers only (Phantom Center, Setting 7). Useful in
optimizing the front/center/right soundfield for best integration of the
- Center Width: Adjusts
the soundfield to be gradually shifted from the front of the room to the
back to suit taste, speaker positioning, and size of room. Setting 0 has the
image furthest forward, 6 furthest back.
CAMCAS (Cambridge Audio Microphone Controlled Auto Setup): Cambridge
Audio's Microphone Controlled Auto Set-up (CAMCAS) tailors the 351R
performance to any room and comes complete with a microphone to complete this
simple procedure. The CAMCAS system performs two sets of tests; first checking
which speakers are connected and whether they are wired correctly and in phase,
then second automatically measuring and adjusting the speaker delay timings and
levels. You can also choose to manually setup the receiver's
Individual Crossovers & Advanced Bass Management: The azur 351R
provides individual crossover adjustments and advanced bass management settings.
- Tone Controls: The azur 351R
offers independent Bass (100Hz) & Treble
(10khz) adjustment from -10 to +10dB.
- Speaker Crossover: Each speaker
(front/center/surround/surround back) and subwoofer crossover point can be adjusted from
40-150Hz (in 10Hz steps) and also to 200Hz.
- LFE Trim: The LFE channel (for DD/DTS material) can also be
trimmed by up to 10dB (in 1dB steps); useful for late night listening or
other situations where it might be desired to reduce the low frequency
effect level temporarily.
- Bass Augment: You can select whether to play front
channel low-frequencies through either the front speakers or the subwoofer,
or through both the subwoofer and front speakers.
Dynamic Range Control: This setting controls the dynamic range of
Dolby Digital movie soundtracks by compressing the audio to limit the difference
in level between loud and quiet passages in the movie. The receiver's Dynamic
Range Control can be set to Auto, On, or Off.
Audio Inputs/Outputs: The AV receiver offers a variety of
analog and digital audio inputs/outputs.
- Digital Inputs: The azur 351R
features one digital optical input and
two coaxial digital inputs.
- Binding Post Speaker Terminals: The receiver has binding-post terminals for
all speaker connections. The binding-post terminals can accept bare wire, pin
connectors, and banana plugs (single only). Speakers with an impedance of
between 4-8 ohms are recommended.
- LFE Output: The azur 351R is equipped with a single LFE
output to connect a powered sub.
- Headphone Output: The receiver features a 1/4" stereo
headphone jack on its front-panel for connecting a pair of optional
headphones. Plugging in a set of headphones will automatically mute the main
speakers and pre-amp outputs, while selecting a 2-channel stereo down-mix
soundfield. Headphones with an impedance of between 32-600 ohms are
FM Tuner w/ RDS: The Cambridge Audio A/V receiver features a built-in
FM tuner with RDS. RDS is a method for the transmission of additional
information from local radio stations. RDS will
only work if the local broadcasting stations have RDS transmission and the
signal is strong enough. There is no AM tuner.
HDMI (ver.1.4): The 351R boasts four HDMI (ver.1.4) inputs
and a single HDMI (ver.1.4) monitor output which fully support 3D, Deep color,
and Audio Return from newer flat-panel TVs. HDMI (High-Definition Multi-Media
Interface) is an all digital connection that can carry both audio/video in one
cable and supports various types of High Definition video content and high
There are no analog video inputs or outputs.
3D Pass-Through: With the advent of 3D media, it is important to own a
receiver that recognizes 3D video signals. The 351R
is able to pass through 3D
signals from your Blu-ray player, ensuring that the 3D effect doesn't get lost
in translation. It also recognizes signals from 3D television broadcasts. By
connecting a 3D-compliant Blu-ray disc player and 3D-compliant TV to the 351R
you will have a 3D home theater where you can enjoy high-definition sound and
video on a level you've never experienced before.
Deep Color Support: The 351R
also supports Deep Color
content, which can display a larger color range than standard-definition
schemes. The result is a more lifelike, vibrant picture.
Audio Return Channel: This feature allows audio to be sent from your
compatible HDTV to your receiver through the same HDMI cable already being used
to send audio and video to your HDTV. This eliminates the need for extra cables
connected to your television.
Lipsync Adjustment: This feature compensates for the timing
shift between the audio and video of the receiver. If needed, the audio signal
can be manually delayed to match the video signal; adjust from 0-500ms (in 10ms
Slim, Aesthetic Design: The Cambridge Audio azur 351R features a
slim designed chassis which measures only 16.9375" (w) x 4.1875" (h) x 14.6875" (d);
so it easily fits on a shelf or inside a cabinet.
On-Screen Display (via HDMI): The AV receiver's on-screen menu
provides quick information about your system's settings. You can easily make
settings for your home theater system while viewing menus on the TV
screen. Simple settings are enabled with the setting menus displayed on the TV
screen. These menu displays can only be output to your TV via HDMI. The unit's
front-panel LCD also displays the receiver's menu adjustments, as well as input
X-Tract Cooling System: The Cambridge Audio azur 351R
employs a unique
cooling system called X-Tract. A perfectly balanced combination of forced
cooling and natural convection effectively draws heat away from the substantial
transformer and output stages and means the 351R
can operate extremely quietly,
at a low temperature and enables a more compact enclosure than would normally be
Backup Memory: The 351R
has a function that preserves the preset
memory and other settings. In the event of a power failure, or if the power cord
of the unit is disconnected from the mains outlet, the back-up memory will
preserve the preset memory for approximately one week. If the power supply is
interrupted for 7 days or longer, the memory settings will be erased.
IR Remote Control: The azur 351R
comes with an IR wireless
remote control that can operate this receiver only.
Remote Connections: The Cambridge Audio azur 351R
with the following custom remote connections.
- IR Input: This 3.5mm input is used to control the 351R
from an external
key-pad (sold separately).
- RS232C Port: The RS-232C port is to be used in conjunction with
an external controller to control the operation of the unit by using an
external device. The RS-232C port may also be used in the future to update
the operating software of the unit so that it will be able to support new
digital audio formats.