Skip Navigation

HELIX E 62C

6-3/4" component speaker system

7 Reviews

Find what fits your vehicle

Can't find your exact vehicle?

Item # 975E62C

This item is no longer available.

Shop all Component Speakers

Overview

Our take on the HELIX E 62C

HELIX's German engineering pedigree really shows up in their Esprit Series speakers, which offer big technological bang for the buck. The E 62C 6-3/4" component speakers use a separate 1" silk dome tweeter that you can mount higher in your vehicle for optimal imaging and stereo separation. Each woofer features a rigid 6-3/4" woven fiberglass cone that delivers tight midrange and bass reproduction, while the durable rubber surround helps this speaker provide exceptional sound for years to come.

Esprit Series E62C 6-3/4

High fidelity with excellent imaging

HELIX's German engineering pedigree really shows up in their Esprit Series speakers, which offer big technological bang for the buck. The E 62C 6-3/4" component speakers use a separate 1" silk dome tweeter that you can mount higher in your vehicle for optimal imaging and stereo separation. Each woofer features a rigid 6-3/4" woven fiberglass cone that delivers tight midrange and bass reproduction, while the durable rubber surround helps this speaker provide exceptional sound for years to come.

Built for power

A tough stamped-steel basket houses each woofer, providing the stability needed to maintain accurate reproduction when the music's turned up loud, and the external crossovers keep the right frequencies going to the right drivers so you can rock out the bass without damaging your tweeters. We recommend that you power the Esprit E 62C speakers with an outboard amplifier to give you the best audio quality. Grilles are included.

Installation note: You'll need a pair of our universal backstraps to install the tweeters in the factory locations.

Paired these to an Alpine MRV-F300 & sounds fantastic although tweeters just a tad bright for my personal tastes as I mounted them in a dash location. Just needs a small amount of EQ & it's absolutely gorgeous with a 10" sub in my Outback with factory dash unit.

Joel, Niagara Falls, NY

What's in the Box:

  • 2 Woofers
  • 2 Metal grilles
  • 2 Plastic grille frames
  • 2 Tweeters (each has 5" speaker lead attached)
  • 2 Flush-mount tweeter housing tops
  • 2 Surface-mount tweeter housing tops
  • 2 Angled tweeter mount bases
  • 2 Flat tweeter mount bases
  • 2 Metal flush-mount clamps
  • 2 Crossovers
  • Two 12' lengths of speaker wire (bare wire on one end and female quick slides on the other for the woofer)
  • Two 5' lengths of speaker wire (bare wire on one end and quick slides on the other for the tweeter)
  • Two 12' lengths of speaker wire (bare wire on both ends)
  • Eight 1-3/8" Self-tapping screws
  • Four 1/2" Self-tapping screws
  • 8 Speed clips
  • Four M4x10mm Flat head machine screws
  • Four M4x25mm Pan head machine screws (with flat and split lock washers attached)
  • 4 Flat washers
  • Eight M4 Nuts
  • Instruction manual (English/ German)
  • Woofer template

Product Highlights:

  • component speaker system includes 2 woofers, 2 tweeters, and 2 crossovers
  • 6-3/4" woven fiberglass woofer cone with rubber surround
  • 1" silk dome tweeter
  • 2-way external crossover network
  • power range: 10-60 watts RMS (180 watts peak power)
  • frequency response: 50-25,000 Hz
  • sensitivity: 91 dB
  • top-mount depth: 2-9/16"
  • grilles included
  • warranty: 2 years
  • Our 60-day money-back guarantee
Reviews

HELIX E 62C Reviews

Average Customer Review(s):

(7 Reviews)
rewards card

Submit a review and enter to win a $350 rewards card

Review this product

Thanks for submitting your review

Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

Your Review

Use the stars below to rate the overall product on a scale of 1-5
1500
Upload your photos

Not visible. Email associated with order.
(e.g., Charlottesville, VA)

Additional Fields (optional)

500
500

By submitting this review, you agree to our terms and review guidelines.

Filter by rating

Customer photos


<< >>
Details

Hands-on research

Features and Specs

General
Speaker Size 6 3/4
Design 2-way
Tweeter Design 1" Dome
Tweeter Composition Silk
Woofer Composition Woven Fiberglass
Woofer Surround Rubber
Parts Warranty 2 Years
Labor Warranty 2 Years
Specifications
Sensitivity (1W at 1 meter) 91
Sensitivity at 2.83 volts N/A
Frequency Response 50 - 25k Hz
Minimum RMS Wattage 10
Maximum RMS Wattage 60
Peak Power Handling (Watts) 180
Impedance (Ohms) 4
Top-mount Depth (Inches) 2 9/16
Bottom-mount Depth (Inches) 2 3/4
Cutout Diameter or Length (inches) 5 5/8

Product Research

Woofer
Tweeter
Crossover

Woofer

Woofer: The E 62C component system includes woofers with woven fiberglass cones and durable rubber surrounds. This woven fiberglass material is very light and extremely stiff, minimizing cone flex and resulting in faster transients and finer detail.

Magnet cover: The woofers are shipped with a rubber magnet cover to protect the speaker. If the cover is removed the depth changes slightly:

  • Top Mount Depth: 2.462"
  • Bottom Mount Depth: 2.623"

Size Classification Note: Crutchfield has traditionally referred to this woofer size as a 6-3/4", while some manufacturers, including Helix (Audiotec Fischer), call it a 6-1/2". Please refer to the Crutchfield Vehicle Selector to confirm fit in your vehicle.

Tweeter

Tweeter: The system uses 1" silk dome tweeters with neodymium motor structures. The tweeters can be flush mounted, surface mounted, or surface mounted at an angle using the included brackets. Once mounted, the tweeters swivel (up to approximately 25°) so you can direct them toward the listening positions.

Tweeter Dimensions:

  Frame Width Frame Length Cutout Diameter Mounting Height Mounting Depth
Flush Mount 2.160" 2.160" 1.835" 0.40" 1.0"
Surface Mount 1.865" 1.865" N/A 1.115" 0.5" (Screw Depth)
Angled Surface Mount 1.840" 1.830" N/A 1.335" 0.5" (Screw Depth)

Crossover

Crossover: The crossovers are separate components with tweeter protection built-in. The inputs and outputs are screw terminals and will accommodate bare wire or spade connectors up to 0.3" wide. The tweeter output level is adjustable by attaching the positive tweeter lead to one of three screw terminals on the crossover, +2dB, 0dB, or -2dB. No crossover frequency or slope information was provided by the manufacturer.

Crossover Dimensions:

  • Length: 3.375"
  • Height: 1.50"
  • Width: 1.175"

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Q & A

Customer Q&A

Crutchfield asked  
Why did you buy this?

great reviews [ STEVE  Mar 19, 2016 ]
Articles