Woofer: The E 62C component system includes woofers with
woven fiberglass cones and durable rubber surrounds. This woven fiberglass
material is very light and extremely stiff, minimizing cone flex and resulting
in faster transients and finer detail.
Magnet cover: The woofers are shipped with a rubber magnet cover
to protect the speaker. If the cover is removed the depth changes slightly:
- Top Mount Depth: 2.462"
- Bottom Mount Depth: 2.623"
Size Classification Note: Crutchfield has traditionally
referred to this woofer size as a 6-3/4", while some manufacturers, including
Helix (Audiotec Fischer), call it a 6-1/2". Please refer to the Crutchfield
Vehicle Selector to confirm fit in your vehicle.
Tweeter: The system uses 1" silk dome tweeters with
neodymium motor structures. The tweeters can be flush mounted, surface mounted,
or surface mounted at an angle using the included brackets. Once mounted, the
tweeters swivel (up to approximately 25°) so you can direct them toward the
| ||Frame Width||Frame Length||Cutout Diameter||Mounting Height||Mounting Depth|
|Surface Mount||1.865"||1.865"||N/A||1.115"||0.5" (Screw Depth)|
|Angled Surface Mount||1.840"||1.830"||N/A||1.335"||0.5" (Screw Depth)|
Crossover: The crossovers are separate components with tweeter
protection built-in. The inputs and outputs are screw terminals and will accommodate
bare wire or spade connectors up to 0.3" wide. The tweeter output level is
adjustable by attaching the positive tweeter lead to one of three screw terminals
on the crossover, +2dB, 0dB, or -2dB. No crossover frequency or slope information
was provided by the manufacturer.
- Length: 3.375"
- Height: 1.50"
- Width: 1.175"
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.