Overview: Atlas Sound Strategy Series II in-ceiling speakers are designed for
commercial, industrial, and institutional applications. They are known for
highly detailed voice, music, and signal reproduction. The speakers feature a white frame, and can be easily
installed in drop-tile or drywall ceilings using a number of mounting options.
The included 24-gauge perforated steel grille has a white epoxy finish, and simply press-fits into the
Drivers: The Atlas Sound FAP62T is equipped with a
6" polypropylene woofer with a 1" voice coil, and a Butyl Rubber surround. The 19mm (3/4") PEI
dome tweeter is coaxially-mounted over the woofer. The drivers are housed in a
low-profile 475 in³ optimally tuned and ported, deep drawn, galvanized metal enclosure.
Wiring Options: The FAP62T has a removable 4-pole Phoenix
style / Euro connector for 70.7V, 100V, or 8Ω applications. This type of
connector allows you to conveniently pre-wire the speaker connections, then
simply plug them in when installing the speakers. The connector can accept bare wire
up to 14-gauge speaker wire. The speaker is equipped with line
matching transformers, requiring an amplifier capable of driving a 70.7V/100V
line. Depending upon the amplifier's wattage rating and the number of speakers
being driven by the amplifier, you can select a 2, 4, 8, 16, or 32-watt tap at
70.7V/100V. The tap selector is conveniently located on the front of the
speaker, allowing you to set or change the taps without removing the speaker. You can also bypass the line transformers and connect the speaker to
a consumer amplifier (the speaker has an 8Ω
Speaker Placement: The Strategy Series II in-ceiling speaker
mounts easily into existing construction drop ceiling or drywall with the
provided tile bridge assembly. The tile bridge assembly consists of two V-shaped
mounting rails and a C-ring assembly. "Dog Leg" tabs hold the speaker securely
in place. For new construction drywall applications, the optional FAP62-TR trim
ring may be used to mark the location for drywall installers to cut around.
Mounting holes in the trim ring accommodate 16" or 24" on-center joist mounting.
The top of the FAP62T enclosure includes a support ring for attaching the
mandatory auxiliary support cable for drop ceiling installations for safety and
- Frequency Response: 63Hz - 20kHz (±7dB)
- Power Handling:
- 70.7V / 100V Systems: 2 - 32 watts
- 8Ω Systems: 50 watts RMS
- Sensitivity (1W/1M): 88dB
- Dispersion: 110°
- Dimensions: Diameter=12.5" Height=8.48"
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.