About the Secura QSL22
The low-profile Secura QSL22 mount is ideal for small TVs and monitors. The budget-friendly mount holds your display a scant 1-1/16" from the wall. And installation is a simple three-step process: Mount the wall plate to wall studs, attach the two brackets to the back of your TV, then place the TV on the wall plate. After mounting, you can shift your TV slightly to the right or left for proper positioning. When you're finished, tighten the locking screws to secure your TV, and you're done.
Product highlights:
- designed for TVs 10"-39"
- supports up to 100 lbs.
- mount holds TV approximately 1-1/16" from wall
- stud-mounting required
- locking screws hold mounted TV firmly in place
- movable brackets for off-center stud placement
- UL-certified for safe mounting and structural integrity
- wall plate: 10-1/16"W x 8-11/16"H x 1-1/16"D
- warranty: 5 years
- MFR # QSL22-B2
What's in the box:
- Wall-plate
- 2 TV brackets (w/ locking screws)
- Four M4x12mm screws
- Four M4x35mm screws
- Four M6x12mm screws
- Four M6x35mm screws
- Four M8x16mm screws
- Four M8x20mm screws
- Four M8x35mm screws
- Two 1/4"x2-3/4" lag-bolts
- Four M4 washers
- Four M6/M8 washers
- Two 0.75" washer
- Four 22mm spacers
- 2 Concrete anchors
- Instruction Manual
- Warranty Information
See the difference between "Open Box" and "Scratch & Dent" Outlet items
Customer reviews for Secura QSL22
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Secura QSL22
Features & specs
| Features | ||
|---|---|---|
| Mount Type | Wall Mount | |
| Motion | ||
| Tilt | No | |
| Swivel | No | |
| Extend/Retract | No | |
| Fixed | Yes | |
| Roll (Level) Adjustment | No | |
| Mounting Details | ||
| Wood Stud (Single) | Yes | |
| Wood Stud (Dual, 16-inch) | No | |
| Wood Stud (Dual, 24-inch) | No | |
| Concrete Block-compatible | Yes | |
| Recessed Housing | No | |
| Outdoor-rated | No | |
| Motorized | No | |
Product Research
Features
TV Compatibility: The Secura QSL22-B2 is a low-profile wall-mount bracket for 10"-39" flat-panel TVs up to 35 lbs.
VESA Pattern: The Secura QSL22-B2 features universal mounting brackets to accommodate horizontal hole spacing on back of TVs of 75mm-200mm and a vertical hole spacing of 75mm-200mm. It will accommodate the following VESA hole patterns in accordance with industry standards set by the Video Electronics Standards Association.
- 75 x 75
- 100 x 100
- 200 x 100
- 200 x 200
M4/M6/M8 Mounting Hardware: The Sanus QSL22-B2 comes with M4, M6, and M8 size bolts of differing lengths to mount the bracket to your TV. Additional hardware may be required for your specific model of TV. For example; shorter or longer screws, thicker or slimmer washers or spacers. These additional accessories can often be found at your local hardware store.
Construction: The Secura QSL22-B2 wall-mount bracket is constructed of heavy-gauge steel with a durable powder-coated black finish. This solid construction provides strength and increased safety.
Low-Profile Design: A slim, low-profile design positions your flat-panel TV just 1.0625" from the wall for a super thin look.
Locking System: Once the wall-plate is anchored to the wall stud and the two TV brackets are attached to the back of your television, the TV brackets hook over the wall-plate and lock into place with screws.
Installation Tools: The following tools are recommended for mounting the QSL22-B2:
- Tape measure
- Pencil
- Stud finder
- Level
- Awl
- Drill
- 7/32" Drill bit (for wood stud)
- 3/8" Masonry bit (for concrete block)
- 1/2" Socket wrench
- Phillips-head Screwdriver
- Hammer
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
Great product for a small screen. Easy to use and keeps screen very close to wall.
David from Clinton, WA