About the MTX JackHammer JH5512-04
MTX JackHammer Series subwoofers offer the deep, powerful bass output found in competition subs, at a price that won't shake your wallet.
The JH5512-04 12" subwoofer sports a rubber surround that's stitched directly to the polypropylene cone for extra strength, then rolled to maximize cone excursion so this sub'll move some air. The high-temperature copper voice coil lets this Jackhammer sub deliver powerful bass with smooth, piston-like precision.
MTX's patented Spider Plateau Venting keep the inner works cool, so this sub can rock for hours. The stamped steel basket adds strength and support, while a rubber boot and distinctive dust cover lend this sub an extra dash of style.
Priced per speaker
Product highlights:
- 12" 4-ohm subwoofer
- polypropylene woofer cone with stitched rubber surround
- power range: 200-400 watts RMS
- peak power handling: 800 watts
- frequency response: 31-150 Hz
- sensitivity: 86.7 dB
- top-mount depth: 6-13/16"
- sealed box volume: 1.25 cubic feet
- ported box volume: 2.0 cubic feet
- warranty: 1 year
- MFR # JH5512-04
What's in the box:
MTX JackHammer JH5512-04 owner's manual
- 12" SVC 4-ohm subwoofer
- Specifications booklet
Customer reviews for MTX JackHammer JH5512-04
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the MTX JackHammer JH5512-04
Features & specs
Features and Specs | ||
---|---|---|
Size | 12 -inch | |
Impedance (Ohms) | --- | |
Cone Material | Polypropylene | |
Surround Material | Stitched Rubber | |
Port diameter (inches) | N/A | |
Port length (inches) | N/A | |
Free-Air | No | |
Dual Voice Coil | No | |
Sensitivity |
86.7 dB at 1 watt | |
Frequency Response | 31 - 150 Hz | |
Max RMS Power Handling | 400 | |
Peak Power Handling (Watts) | 800 | |
Top Mount Depth (inches) | 6 13/16 | |
Bottom Mount Depth (inches) | 7 5/16 | |
Cutout Diameter or Length (inches) | 11 | |
Frame Width | 12.625 | |
Frame Length | 12.625 | |
Vas (liters) | 66.5 | |
Fs (Hz) | 29.33 | |
Qts | 0.52 | |
Xmax (millimeters) | 13.46 | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Box Requirements | ||
Ideal Sealed Box Volume (cubic feet) | 1.25 | |
Minimum Sealed Box Volume (cubic feet) | 1.25 | |
Maximum Sealed Box Volume (cubic feet) | 1.25 | |
Ideal Ported Box Volume (cubic feet) | 2 | |
Minimum Ported Box Volume (cubic feet) | 2 | |
Maximum Ported Box Volume (cubic feet) | 2 |
Product Research
Features
Enclosure Compatibility
Features
Polypropylene Cone: The woofer features a graphite-colored, stitched polypropylene cone with the MTX Audio Jack Hammer logo. Polypropylene is lightweight yet durable and offers efficient, dependable bass response.
Rubber Surrounds: The Jack Hammer series woofer features a rubber surround that is stitched directly to the cone for durability. The woofer's rubber surround uses FEA optimized roll geometry to maximize excursion without sacrificing cone surface area.
Voice Coil: The woofer's voice coil is wound with 428-degree High Temperature wire to ensure reliability even at loud volumes.
Spider Plateau Venting Technology: The Jack Hammer series woofer uses proprietary Spider Plateau Venting technology which helps push out air out of the voice coil and bring cool air in, adding to the reliability of the subwoofer and keeping it cool even in the hottest vehicles.
Asymmetrical Linear Drive System: The woofer's Asymmetrical Linear Drive System combines a flat progressive spider with an extended pole piece to reproduce smooth, linear motion for incredibility crisp, clean sound.
Black Stamped Basket: The JH55 subwoofer has a black stamped basket design for structural strength, a stamped back panel with MTX's aggressive looking Gothic logo, and a large rubber boot protecting the woofer's magnet.
Terminals: The 12" woofer features a pair of nickel-plated, spring-post terminals for attaching your speaker wire from your amplifier.
Enclosure Compatibility
Recommended Sealed Box Volume: MTX recommends mounting this woofer in a sealed enclosure made out of 3/4" MDF with an internal volume of 1.25 cu/ft.
Recommended Vented Box Volume: MTX recommends a ported enclosure made out of 3/4" MDF with an internal volume of 2.00 cu/ft using a 2" wide x 14" tall slot port that is 16.75" long.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
These are the second batch of JackHammers i have had of these bad boys and i still love them. They hit all the right lows and dont rattle and sound awkward. They hit clean and match the power of my MTX amp as well. GET THESE SUBS. They are definitely the best for your dollar.
Connor M from Atlanta, Ga