Full-motion hinged arm mount for TVs 40"-70"
Our take on the Secura QLF215 by Crutchfield's Ralph Graves
The Secura QLF215 full-motion wall mount lets you adjust your TV for optimal viewing in just about any room. The articulated arm can extend your TV up to 14-7/8" from the wall. The mount can be swiveled up to 50° from up to side to side, and tilted up or down. After installation, the mount's "roll" adjustment lets you fine-tune your TV's position to ensure that it's level. And installation is a simple three-step process: Mount the wall plate to a wall stud, attach the brackets to the back of your TV, then lock them into place on the wall plate.
- designed for TVs 40"-70"
- supports up to 100 lbs.
- pivoting arm extends TV up to 14-7/8" away from the wall
- tilt range: +5° to -15° (may vary with size of TV)
- roll adjustment: +3° to -3°
- swivel range: ±50°
- brackets lock onto wall plate for simple installation
- stud-mounting required
- UL-certified for safe mounting and structural integrity
- 25"W x 16-1/2"H x 3-1/4"D (up to 14-7/8" with arm extended)
- warranty: 5 years
- Our 60-day money-back guarantee
What's in the Box:
- Wall-plate w/ extension arm
- 2 TV brackets
- Two M5x30mm screws
- Four M6x12mm screws
- Four M6x35mm screws
- Four M8x16mm screws
- Four M8x20mm screws
- Four M8x35mm screws
- Four 5/16"x2-3/4" lag-bolts
- Four 3/4" washers
- Four M6/M8 washers
- Four 22mm spacers
- 4 Concrete anchors
- Instruction Manual
- Warranty Information
Fabulous mount!! Heavy duty and very versatile Used it to mount my 65" Samsung curved TV. Simple install. Able to easily pull out from wall and angle TV over 30 degrees from wall. Thanks Crutchfield!!
Jim, Brentwood, NH
Secura QLF215 Reviews
Average Customer Review(s):
Thanks for submitting your review
TV Compatibility: The Secura QLF215-B2 is a full-motion wall-mount bracket for 40"-70" flat-panel TVs up to 100 lbs.
VESA Pattern: The Secura QLF215-B2 features universal mounting brackets to accommodate horizontal hole spacing on back of TVs of 100mm-600mm and a vertical hole spacing of 100mm-400mm. It will accommodate the following VESA hole patterns in accordance with industry standards set by the Video Electronics Standards Association.
- 100 x 100
- 200 x 100
- 200 x 200
- 300 x 200
- 300 x 300
- 400 x 200
- 400 x 300
- 400 x 400
- 600 x 400
M6/M8 Mounting Hardware: The Sanus QLF215-B2 comes with M6 and M8 size bolts of differing lengths to mount the bracket to your TV. Additional hardware may be required for your specific model of TV. For example; shorter or longer screws, thicker or slimmer washers or spacers. These additional accessories can often be found at your local hardware store.
Construction: The Secura QLF215-B2 wall-mount bracket is constructed of heavy-gauge steel with a durable powder-coated black finish. This solid construction provides strength and increased safety.
Full-Motion Design: The QLF215-B2 extends from the wall (3.5625"-14.8125"), tilts up/down (+5°/-15°), swivels left or right (+/-50°), and rolls (+3°/-3°) for easy viewing anywhere in the room.
Installation Tools: The following tools are recommended for mounting the QLF215-B2:
- Tape measure
- Stud finder
- 7/32" Drill bit (for wood stud)
- 3/8" Masonry bit (for concrete block)
- 1/2" Socket wrench
- Phillips-head Screwdriver
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
Why did you buy this?
YOUR TECH'S ADVISE [ JOHNNY Jun 22, 2018 ]
I feel confident that Crutchfield would only sell the most reliable brands made of quality materials. Peace-of-mind! [ Scott Dec 11, 2016 ]
1 question already asked
Hi Phil. Sorry for delay. Just saw your question on my email. The mount can get no closer than 3.75 inches from the wall. It articulates both straight back on itself, like a letter "w" folding up on itself and completely to either side (still 3.75 inch minumum). When folded back to the sides the center of your TV will be offset 11" from the center of the mount. Does that help? I can send pics too if you want. Kurt [ Kurt Jun 21, 2018 ]
The back of my tv is 4.25 inches from wall. Yes it does move left or right [ Greg Jun 20, 2018 ]
When fully Retracted, the wall mount will sit 97mm or 3.81 inches from the wall. It will push straight back onto the wall but can be adjusted side to side if desired. [ Justin Jun 20, 2018 ]