Definitive Technology DI 6.5LCR Rough-in Kit
New construction brackets for Definitive Technology DI 6.5LCR in-wall speakers
Our take on the Definitive Technology DI 6.5LCR Rough-in Kit by Crutchfield's Dave Bar
These new-construction brackets are designed for the Definitive Technology DI 6.5LCR in-wall speakers. Attach the brackets to wall studs before the drywall goes up to mark the speaker locations for your builder, so you won't need to cut holes later.
- compatible with Definitive Technology DI 6.5LCR in-wall speakers
- includes two brackets
- sturdy metal construction
- mounting screws not included
- required cutout dimensions: 7-3/8"W x 16-1/8"H
- bracket outer dimensions: 9-3/8"W x 18-3/16"H x 3/4"D
- warranty: 60 days
- Our 60-day money-back guarantee
What's in the Box:
- 2 Metal brackets
Definitive Technology DI 6.5LCR Rough-in Kit Reviews
Average Customer Review(s):
Thanks for submitting your review
Overview: When planning speaker installations in new construction many installers find it useful to install rough-in brackets onto wall studs or ceiling joists so that the sheetrock contractor knows precisely where to cut the appropriate size holes. The DI Series rough-in brackets were custom designed from the ground up to be easy to install. The mounting bracket is heavy gauge steel that will not bend or break with rough handling and sloppy drywall cutting by subcontractors. The convenient wire tie loop is scored to allow easy snap off once the speaker is installed.
Compatibility: The DI 6.5LCR rough-in bracket is compatible with Definitive Technology's dual 6.5" Disappearing In-Wall LCR Loudspeaker (DI 6.5RLCR). DI Rough-in Brackets are packaged two to a carton (2 mounting brackets); mounting screws not supplied.
Metal Brackets: The mounting brackets are fabricated from heavy duty painted stamped steel. There are no sharp metal edges to cut an installer's hands and they are ultra rigid, so that when drywall is laid over and cut the brackets will not bend or break. The mounting bracket requires rectangular cutout that measures 7.375" (w) x 16.125" (h) x 0.375" (d). The outer dimensions of the mounting bracket are 9.375" (w) x 18.1875" (h) x 0.75" (d).
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
Why did you buy this?
the walls are open and these secure the speakers to minimize vibration which causes distortion. [ STEVE Oct 19, 2017 ]