Features

Vehicle Compatibility: The Kicker SSV 45PGN5 is an amplified five speaker audio system designed specifically for select 2016-2018 Polaris General ATVs.

Digital Media Receiver with Dash Kit: The included SSV Works digital media receiver (MRB3) consists of two components - a wired controller and a hide-away source unit. The wired controller features a an attached 5' cable which connects to the hide-away source unit. Both components are weather resistant. The included dash kit has been designed and engineered specifically to fit the MRB3 wired controller into the factory dash pocket location of your Polaris General. The hide-away unit is pre-mounted to a bracket along with the amplifiers for a direct bolt-on installation.

• Backlit Display & Buttons: The wired controller features a large hyper-white LED backlit display designed to be visible in all conditions while controlling volume, track, and play/pause functions with glove friendly, backlit rubber-coated buttons.
• Bluetooth Audio Streaming: Wireless stream music from your Bluetooth source device to the MRB3 with basic playback control (Play/Pause & Previous/Next Track). Does not support song/artist display or phone calls.
• Aux In/USB Charging Port: A panel mounted input port provides an 3.5mm Aux input and a USB (type-A) charging port for your mobile device.
• AM/FM Tuner: The offers a built-in AM/FM tuning with manual and seek tuning (no presets).
• Audio Settings: You can select from seven EQ presets (Flat, Classical, Pop, Rock, Jazz, Metal, or Off). In Off mode, you can manually adjust Bass & Treble. It also offers a Loudness function, as well as balance & fade controls.

PXA Series Amplifiers: The Kicker 45PGN5 SSV Works Polaris General Audio Kit comes with two PXA Series amplifiers - a 4ch amp (PXA300.4) and a mono amp (PXA500.1). The PXA series amplifiers are designed for motorized vehicles with small battery/charging systems; Kicker's new Direct Amp Technology uses the vehicle's charging system as its power supply, offering 90-percent efficiency. Little ventilation is required and with its small footprint, the PXA series amps can be installed in small spaces. The PXA Amps are weather-resistant, using a conformal-coated circuit board for protection against the elements. They also include no-rust stainless-steel mounting hardware.

• 4-Channel Amplifier: The PXA300.4 is a 4-channel amplifier is designed to output 50 watts RMS x 4 channels at 4Ω (<1% THD+N). So you can power the included kick-panel speaker pods and cage-mount rear speaker pods. The differential audio circuit reduces the likelihood of picking up any engine noise, and helps lower THD (Total Harmonic Distortion). It offers a selectable HPF @ 60, 80, or 120Hz.
• Mono Amplifier: The PXA500.1 is a mono amplifier designed to output 500 watts RMS at 2Ω (< 1% THD+N). The differential audio circuit reduces the likelihood of picking up any engine noise, and helps lower THD (Total Harmonic Distortion). It offers a selectable LPF @ 60, 80, 100, or 120Hz.

6.5" Kick-Panel Speaker Pods: The custom molded kick-panel pods house Kicker KM 6.5" two-way marine speakers with a polypropylene woofers, rubber surrounds, and coaxially-mounted tweeter for exceptional highs and midrange to provide full-range audio outdoors on the trail. The speaker pods mount in the kick-panels using the included stainless steel hardware. They are 100% fiberglass for the best sound quality and bass response. They are finished in a black texture coat to match your ATV's texture and can be custom painted to match your color scheme.

6.5" Cage-Mount Speaker Pods: The rear cage-mount pods house Kicker KM 6.5" two-way marine speakers with a polypropylene woofers, rubber surrounds, and coaxially-mounted tweeter for exceptional highs and midrange to provide full-range audio outdoors on the trail. They mount directly to the roll cage via the included brackets and hardware. The dual clamping system allows 360-degree rotation while on the cage; unlike other cage pods where you need to find its position before the clamp goes on. They are finished in a black texture coat to match your ATV's texture and can be custom painted to match your color scheme.

10" Under-Dash Sub Enclosure: The custom-molded sub enclosure houses a Kicker CompRT10 10" marine woofer that can handle up to 400 watt (RMS) / 800 watts (Peak) and delivers a frequency response of 25-500Hz. The sub enclosure easily installs under the dash. The enclosure bolts in using the included stainless steel mounting hardware and provides the proper airspace required for the 10" woofer. The sub enclosure is 100% fiberglass for the best sound quality and bass response and is finished in a black texture coat to match your ATV's texture, but can also be custom painted to match your color scheme.

Pre-Cut Wire & Cable: The Kicker 45PGN5 SSV Works Polaris General Audio Kit comes with pre-cut wire and cables to connect the digital media receiver, amplifier, speakers, and sub together. Power & ground cables are also provided to make connection to your ATV's battery (no additional amplifier kit is needed).