Audio/video component cabinet with turntable compartment
Our take on the Bell'O ATCA90111 by Crutchfield's Ralph Graves
The lift top is supported by gas springs to hold it in any position (turntable and components not included).
Beautiful storage for your record-playing stereo system
The Bell'O ATCA90111 cabinet makes an attractive — and practical — home for your turntable and related audio components. This real wood cabinet features a rich espresso finish and gun metal hardware.
Easy access to your turntable
The top compartment of the cabinet was designed for turntables. Its lift top has a front glass panel so you can keep an eye on your records as they spin. The top swings up smoothly on a piano hinge. Sturdy gas springs hold the top in any position, and ensure it always closes gently.
Store 3-4 components
The cabinet also features two adjustable shelves, plus a fixed[-]position bottom shelf. Openings in the two removable rear panels let you run your cables neatly. The door features a tempered safety glass panel that allows remote commands to pass through.
- stores up to 3-4 components
- turntable compartment:
- hinged lift top with strong gas springs
- front glass panel
- interior dimensions: 19-5/8"W x 20"D
- weight capacity: 30 lbs.
- 2 lower adjustable shelves (each)
- 19-5/8"W x 20"D
- weight capacity: 15 lbs.
- bottom shelf:
- 19-5/8"W x 20"D
- weight capacity: 20 lbs.
- tinted tempered glass door panel
- real wood cabinet in espresso finish
- gun metal hardware
- ventilation to keep components cool
- two removable back panels with openings for cables
- 23-5/8"W x 42"H x 22"D
- weight: 134.25 lbs.
- warranty: 1 year
- Our 60-day money-back guarantee
What's in the Box:
- 2 Side-panels
- 2 Back-panels
- Turntable-shelf support
- 2 Adjustable shelves
- Large glass door
- Small glass door
- 2 Tension-arms
- 14 Thumb-screws
- Ten 6.3mm x 32mm screws
- Four 3.5mm x 16mm screws
- Five 3.5mm x 15mm screws
- Ten 19mm washers
- 14 Dowels
- 8 Shelf-pins
- 2 Hinges (with 12 screws)
- 2 Latches
- 2 Self-adhesive pads
- Security cable
- Touch-up pen
- Assembly Instructions
thomas, Fort Mitchell, AL
Bell'O ATCA90111 Reviews
Average Customer Review(s):
Thanks for submitting your review
Features and Specs
|Number of Shelves||4|
|Number of Adjustable Shelves||2|
|Number of Drawers||None|
|Built-in Cooling Fan||No|
|Stand Weight Limit||80 lbs|
|TV Shelf Weight Limit||N/A|
|TV Shelf Width||---|
|TV Shelf Depth||---|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
Real Wood Cabinet: The Bell'O ATCA90111 AV cabinet is crafted of real wood with an espresso finish and features gun-metal hardware.
Turntable Shelf: The Bell'O ATCA90111 features a turntable shelf with a lift top that opens to a near vertical position for easy access of your record player. The lift top is powered by strong gas springs to keep the top stable in any position and prevents it from accidentally falling. The turntable shelf measures 19.625" (w) x 20" (d), and can support up to 30 lbs.
Adjustable Component Shelves: In addition to your turntable, the ATCA90111 accommodates three additional audio/video components on three interior wood shelves with internal ventilation slots for convection cooling of those components. Each shelf measures 19.625" (w) x 20" (d). The two upper shelves are height adjustable, while the bottom shelf is fixed. The two adjustable shelves can support up to 15 lbs each, while the bottom shelf supports 20 lbs.
Tinted Tempered Glass Doors: Your components are hidden behind a dark tinted tempered safety glass door that allows for remote control operation and reduces dust. Your turntable is hidden behind a separate smaller tempered glass door.
Cable Management System: The integrated Cable Management System (CMS) consists of two removable rear panels for easy access and management of wires and interconnect cables.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
Why did you buy this?
because it had a place to put my turn table. [ ROBERT L Aug 22, 2017 ]
7 questions already asked
2 answers Bottom shelf weight limit. ... I see the specs say 20 lbs. My receiver is 22 lbs and I'm just gonna round up and say 23 lbs with cables and connectors and electron gremlins sleeping on top. Is this gonna warp or put excess strain on the bottom shelf? Would it need more bottom support? Or is 2-3 lbs within tolerance? It'd be a waste to put it on the top shelf where I could put a record player. [ K Aug 27, 2018 ]
I have a reel to reel tape player that I would also like to store in this unit should I buy it, but I just weighed it and it is 45 pounds! Would anyone know if that would damage the second or third shelf or would it be alright? [ I Sep 12, 2018 ]
If you are referring to the lower adjustable shelf I don't see the extra few pounds as a problem. I have my CD player and cable box on that shelf. I have my turntable up top as designed but put my receiver on the first shelf which I think is rated for 50 pounds. [ Dennis Sep 01, 2018 ]
10 1/2 - 18 inches [ DAVID Sep 03, 2018 ]
I have the 2nd shelf from the bottom at 9 inches and the 3rd from the bottom at 20 inches. there are shelf pins that are adjustable so you might be able to go up or down 1 or 2 inches on each shelf. the 4th shelf is the turntable section. [ Gregory Aug 21, 2018 ]
12" hope this helps. [ JAMES Aug 21, 2018 ]
it does not look like it ,but it is nice piece we.like it. [ MICHAEL L. Mar 07, 2018 ]
No. There are extra blocks of wood that the hinges are screwed into on the left hand side. These are absent on the right side, and there are bumpers for the door instead. It would not be impossible to customize it if you are handy however. [ TIMOTHY Mar 06, 2018 ]
If you have moderate woodworking skills you could do it. But right out of the box the hinge is on the left side, period. [ FREDERICK B. Mar 06, 2018 ]
The hinges are pre drilled, but i don't see any reason you couldn't drill the holes on the other side. it is a solid cabinet. [ Gregory Mar 06, 2018 ]
The information we have on the Bell'O ATCA90111 indicates that the two upper shelves are height adjustable, while the bottom shelf is fixed. So you could still potentially store your records under the turntable on one of the two upper shelves; just not the bottom shelf. For more details or to discuss further, please feel free to contact an Advisor directly by phone (888.955.6000) or online chat. Thanks! :) [ Larry Oct 31, 2017 ] Staff
Hi there! I purchased this cabinet in the spring and I can confirm that it is really made of wood. It is definitely a solid piece of furniture to house my stereo components in Should you decide to purchase this item you won't be disappointed. [ ROBIN Oct 12, 2017 ]
It's real wood, not sure of the species as it has that wire brushed, dark stain finish. I do wish there had been a choice of finishes. I was very careful with assembly, and I took longer than the estimate, but it was easy. The back has panels that attach magnetically which is wonderful for running wires between components. Fred [ FREDERICK B. Oct 12, 2017 ]
THIS is REAL wood...solid and nicely stained...You will not be disappointed. Glass is smoked with quality hardware/fasteners. Agree with other posters..Pictures do not do this justice. In a room it just pops. THIS IS NOT THE JUNK you used to get from Service Merchandise etc. Thanks to Crutchfield for once again having the quality we ask for at fair prices. [ michael Oct 12, 2017 ]
It is real wood not MDF. Look at weight of product. [ GIANLUCA Oct 11, 2017 ]
It is real wood veneer. It feels very solid. I am pretty darn happy with it. I would say better than expected. I loved the turntable shelf I have an old Technics direct drive, but lost the cover so this works great for me. [ Gregory Oct 11, 2017 ]
It's real wood and it's a solid piece of furniture! I love mine! [ SCOTT Oct 11, 2017 ]
Pretty sure it's MDF covered by a veneer. It is very heavy. It works for me. [ ROBERT L Oct 11, 2017 ]
I measured the distance between the turntable shelf, and the bottom of the lid, and it is 8.5 inches maximum. To be safe, I don't believe you would want anything taller than 8.25 inches in there. [ FREDERICK B. Jun 15, 2017 ]
Approximately 8 inches. [ Jeffrey Jun 13, 2017 ]
you've got 8.5" clearance [ M Jun 12, 2017 ]
I'm afraid the Bell'O ATCA90111 is the only cabinet we currently carry that's designed specifically for storing/mounting a turntable. If you would like to discuss other options that may work with your turntable and other components, feel free to contact an Advisor directly by phone (1-800-324-9695) or online chat. [ Larry Mar 21, 2017 ] Staff
Frequently Compared With
Audio/video component cabinet with turntable compartment
Salamander Designs TC3 Right End Chair Section
BDI Cavo™ 8167
Home theater cabinet for TVs up to 70"
BDI Braden 8828
Audio/video cabinet for TVs up to 75"