2-way, surface-mounted commercial 10" speaker (White)
| Commercial Audio 101 |
Our take on the QSC AD-S10T by Crutchfield's Eric Angevine
Big-time bass for your retail space
QSC AD-S10T speakers are weather-resistant, so you can use them for music and live paging of customers indoors or out. This speaker mounts a hard-hitting 10" woofer and a 1" compression driver that produces crystal-clear highs.
QSC includes a sturdy and highly adjustable X-mount assembly that allows you to mount and aim this large speaker easily and safely. The AD-S10T features multi-tap transformers for use with 70-volt or 100-volt audio systems, while an 8-ohm bypass setting allows use with regular home audio receivers or amplifiers. See what our satisfied customers have to say.
Get a free system design
- weather-resistant surface-mounted speaker with 10" woofer and 1" compression driver
- program power: 500 watts
- frequency response: 50-19,000 Hz (-10db)
- maximum SPL: 122 dB
- sensitivity: 92 dB
- 8-ohm nominal impedance
- multi-tap transformer for 70V or 100V systems
- 100, 50, 25, 12.5 watt taps
- 8-ohm bypass setting for use with regular home audio receivers and amps
- ABS polymer back enclosure
- paintable aluminum grille
- X-mount hardware and Euroblock connector included
- 12-1/2"W x 20-3/8"H x 11-3/4"D
- weight: 31 lbs.
- warranty: 3 years
- Our 60-day money-back guarantee
What's in the Box:
- Surface-mount commerical loudspeaker
- Euro-style connector
- Terminal weather protection cover
- X-mount bracket
- Four M4 screws
- Quick-Start Guide
- Warranty Sheet
Features and Specs
|Drivers per speaker||2|
|Woofer Size (inches)||10|
|Tweeter Size (inches)||1.4|
|System Frequency response||50-19k|
|Peak Power rating||0|
AcousticDesign Series: QSC's AcousticDesign series offers integrators a premium quality installed sound solution where performance, coverage, and aesthetics are paramount. Combined with unprecedented ease-of-installation and high weather resistance, the AcousticDesign series provides integrators a versatile and confident install solution.
Surface Mount Speaker: The QSC AcousticDesign AD-S10T is a surface mounted 70/100V, 10" two-way loudspeaker system, ideally suited for a wide variety of foreground and background sound reinforcement applications.
Two-Way Driver Design: The AD-S10T features a high quality 10" weather treated paper cone woofer on a 2.5" voice coil. A carefully selected 1" exit, 1.4" compression driver perfectly matches the sensitivity and performance of the woofer for outstanding full-range reproduction.
DMT (Directivity Matched Transition): Consistent and even 90° axisymmetric (conical) coverage is achieved through DMT (Directivity Matched Transition), a QSC innovation which matches the directivity patterns of the woofer and the high-frequency waveguide at the crossover point. The result is a coherent transition between transducers and improved off-axis response.
70/100V or 8-Ohm: The even, accurate frequency response of the AD-S10T is aided by a 60-watt low-loss, low-saturation transformer with selectable taps, including an 8Ω bypass. To preserve weather resistance, the rotary selector is located on the back of the enclosure, protected by a weather grommet.
Euro-Style Connector: The Euro-style connector allows pre-wiring of the speaker and when combined with the quick "snap-on" deployment of the loudspeaker to the mount, installation is completed in a fraction of the time required versus competitive models.
Rugged Enclosure Rated for Indoor & Outdoor Use: With rugged ABS enclosures, sealed input panel covers, and powder-coated aluminum grilles for weather resistance, the AcousticDesign surface mounted series exceed IEC60529 IP-54 ratings for dust and splash resistance. The AD Series loudspeakers qualified for outdoor use using the following tests.
- Salt Fog: MIL-STD-810G Method 509.5 for 100 hrs.
- Humidity: MIL-STD-810G Method 507.5, Natural cycle B2, cyclic high RH for 7 days.
- High & Low Temperature: Tested to QSC internal standards between -20° and 50° C.
X-Mount System: Installers will appreciate the award-winning X-Mount system included with each full-range AcousticDesign model. This ingenious mounting solution achieves unprecedented ease-of-installation in horizontal, vertical, wall, or ceiling deployments. Knurled surfaces at the pivot planes ensure the load will not drift or sag over time. Articulation marks allow pre-configuration of the X-Mount while on the ground with no special tools required. Once secure, the loudspeaker installs in seconds, allowing the installer to work safer, smarter, and faster.
Note: The AD-S10T also includes M10 fittings for optional yoke mount (YMS10T) or shoulder eyebolt (M10 Kit-C) accessories for installation versatility.
Black or White Finish + Paintable: The AcousticDesign series feature a stylish appearance free of obtrusive logo adornments for aesthetically sensitive installations. AcousticDesign surface loudspeakers are available in QSC standard black or white, and may be painted to match any decor.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
Frequently Compared With
2-way, surface-mounted commercial 10" speaker$670.00 each
JBL Control® 25AV
5-1/4" 2-way weather-resistant surface mount speakers
Passive indoor/outdoor subwoofer
2-way, surface-mounted commercial 8" speaker