Low-profile fixed wall mount for 40"-70" TVs
Our take on the Secura QLL23 by Crutchfield's Ralph Graves
The low-profile Secura QLL23 mount features a large wall plate that holds your TV only 1-1/4" from the wall. Installation is a simple three-step process: Mount the wall plate to wall studs, attach the brackets to the back of your TV, then hang the TV on the wall plate. The mount will make an audible click when the brackets lock in place, ensuring a secure fit. After mounting, you can shift your TV slightly to the right or left for proper positioning. Quick release straps that hang behind the TV make it easy to disconnect it from the wall plate.
- designed for TVs 40"-70"
- supports up to 100 lbs.
- mount holds TV approximately 1-1/4" from wall
- stud-mounting required
- quick release locking system
- movable brackets for off-center stud placement
- UL-certified for safe mounting and structural integrity
- brackets: 27"W x 7"H x 1-1/4"D
- warranty: 5 years
- Our 60-day money-back guarantee
What's in the Box:
- 2 TV brackets
- Four M6x12mm screws
- Four M6x35mm screws
- Four M8x16mm screws
- Four M8x20mm screws
- Four M8x35mm screws
- Two 5/16"x2-3/4" lag-bolts
- Two 5/16" washers
- Four M6/M8 washers
- Four 22mm spacers
- 2 Concrete anchors
- Instruction Manual
- Warranty Information
Easily installed, easy to adjust. Great product
Mike, Elizabethtown, KY
Secura QLL23 Reviews
Average Customer Review(s):
Thanks for submitting your review
TV Compatibility: The Secura QLL23-B2 is a low-profile wall-mount bracket for 40"-70" flat-panel TVs up to 100 lbs.
VESA Pattern: The Secura QLL23-B2 features universal mounting brackets to accommodate horizontal hole spacing on back of TVs of 100mm-700mm and a vertical hole spacing of 100mm-400mm. It will accommodate the following VESA hole patterns in accordance with industry standards set by the Video Electronics Standards Association.
- 100 x 100
- 200 x 100
- 200 x 200
- 300 x 200
- 300 x 300
- 400 x 200
- 400 x 300
- 400 x 400
- 600 x 400
- 700 x 400
M6/M8 Mounting Hardware: The Sanus QLL23-B2 comes with M6 and M8 size bolts of differing lengths to mount the bracket to your TV. Additional hardware may be required for your specific model of TV. For example; shorter or longer screws, thicker or slimmer washers or spacers. These additional accessories can often be found at your local hardware store.
Construction: The Secura QLL23-B2 wall-mount bracket is constructed of heavy-gauge steel with a durable powder-coated black finish. This solid construction provides strength and increased safety.
Low-Profile Design: A slim, low-profile design positions your flat-panel TV just 1.25" from the wall for a super thin look.
Center TV Quickly: Your TV can slide from side-to-side on the QLL23-B2 wall-mount for perfect positioning on the wall. The TV brackets easily shift left and right on the wall plate to allow perfect TV placement, even with off-center wall studs.
Quick-Releasing Locking System: A quick-release locking system secures your TV to the QLL23-B2's wall-mount plate. Once the wall-plate is anchored to the wall studs and the two TV brackets are attached to the back of your television, the two TV brackets hook and click into the wall-plate. There is a strap on each TV bracket which allows you to remove the brackets and your television from the wall-plate.
Installation Tools: The following tools are recommended for mounting the QLL23-B2:
- Tape measure
- Stud finder
- 7/32" Drill bit (for wood stud)
- 3/8" Masonry bit (for concrete block)
- 1/2" Socket wrench
- Phillips-head Screwdriver
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.