About the Focal RSE-130
The benefit of Focal innovation
Focal adds a phase plug to the woofer cone for better sound dispersion.
The benefit of Focal innovation
Focal's acclaimed sound is coveted by audiophiles and recording studios worldwide, and their Auditor Series speakers bring that sound quality to your car at a competitive price. This impressive RSE-130 component system, which includes two 5-1/4" woofers, two tweeters, and two external crossovers, will easily outperform your factory speakers and bring the fun back to your time in the car.
Exceptional components
To overcome the limitations of low woofer placement, the woofer's cone features a phase plug for better sound dispersion, so you'll experience a rich, full sound. Prepare to be moved by the bright highs and crisp detail broadcast by these Mylar inverted dome tweeters. With included mounting hardware, you'll have the tools you need to enhance stereo imaging by installing these tweeters in a good spot high up in your doors, in the sail panel, or on the dash.
Compact crossover network
This system's external crossover ensures a seamless distribution of frequencies to the woofer and tweeter, for a totally natural sound. The prewired crossovers are compact enough to fit in some pretty tight places.
Built to last
A polypropylene woofer cone and butyl rubber surround ensure these speakers will live a long life in your car doors, withstanding all kinds of environmental abuse while delivering robust sound. Focal built these speakers with an extra-large voice coil and a powerful magnet so they can handle an honest 50 watts RMS. Handsome mesh grilles are also included in case you're planning on a custom installation.
Product highlights:
- component speaker system includes two 5-1/4" woofers, 2 tweeters, and 2 external crossovers
- polypropylene woofer with butyl rubber surround
- Mylar inverted dome tweeter
- mesh/ABS grilles included
- prewired external crossover (12dB/oct)
- handles up to 50 watts RMS (100 watts peak power)
- frequency response: 65-21,000 Hz
- sensitivity: 90 dB
- impedance: 4 ohms
- woofer mounting depth: 2-1/4"
- warranty: 1 year
- MFR # RSE-130
What's in the box:
- Two woofers
- Two tweeters (each with 18" length of speaker wire attached)
- 2 Flush mount tweeter cups (installed)
- 2 Surface mount tweeter adapters
- 2 Angled surface mount tweeter adapters
- 2 Crossovers
- 2 Woofer grilles
- 2 Woofer grille mounting rings
- 12 Speed clips
- Eight 1" Pan head screws (large head)
- Four 1" Pan head screws (small head)
- 2 Adhesive backed pads
- User manual (English/ French/ German/ Spanish/ Italian/ Portuguese/ Chinese/ Russian)
- Specifications printed on box
- Thank you note
Featured video:
Customer reviews for Focal RSE-130
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Focal RSE-130
Features & specs
| General | ||
|---|---|---|
| Speaker Size | 5 | |
| Design | 2-way | |
| Tweeter Design | Inverted Dome | |
| Impedance (Ohms) | 4 | |
| Tweeter Composition | Mylar | |
| Woofer Composition | Polypropylene | |
| Woofer Surround | Butyl Rubber | |
| Parts Warranty | 1 Year | |
| Labor Warranty | 1 Year | |
| Specifications | ||
| Sensitivity (1W at 1 meter) | N/A | |
| Sensitivity at 2.83 volts | 90 | |
| Frequency Response | 65 - 21k Hz | |
| Minimum RMS Wattage | --- | |
| Maximum RMS Wattage | 50 | |
| Peak Power Handling (Watts) | 100 | |
| Top-mount Depth (Inches) | 2 1/4 | |
| Bottom-mount Depth (Inches) | 2 1/2 | |
| Cutout Diameter or Length (inches) | 4 9/16 | |
| Mounting Height (Inches) | 0.228 | |
| Frame Width | 5.118 | |
| Frame Length | 5.118 | |
Product Research
Features
Phase Plug: The bullet-shaped phase plug in the center of the woofer ensures a smooth, flat off-axis frequency response by preventing the higher frequency sound waves emanating from one side of the cone from interfering with sound waves from the other side of the cone.
Voice Coil: The voice coil is wound around a 1" diameter low-mass Kapton former, ensuring no coil deformation.
Tweeter Mounting: The tweeters can be flush mounted, surface mounted, or surface mounted at an angle (approximately 30°) using the included adapters. Once installed in any of the housings, the tweeter will pivot approximately 15° in any direction.
Note: Although the tweeters are shipped in their flush mount housings, no flush mount hardware is included. A method of holding the housings in place must be fabricated.
Tweeter Dimensions:
| Flush Mount | Surface Mount | Angled Surface Mount | |
|---|---|---|---|
| Mounting Height | 0.2" | 0.84" | 1.6" |
| Depth | 0.65" | screw depth | screw depth |
| Frame Diameter | 2.11" | 1.775" | 1.78" x 1.81" |
| Cutout Diameter | 1.77" | N/A | N/A |
Crossover: The input and output wires are attached to the crossover. The 19" input wires are not terminated (bare wire). Both the woofer and tweeter output wires are 10" long and terminated with quick slides to easily attach to the drivers. The crossover slope is 12 dB/octave.
Crossover Dimensions:
- Width: 2-7/8" (3-1/8" including wires)
- Height: 7/8"
- Depth: 2"
The Focal RSE-130 replaces these items
Focal Performance R-130S2
- component speaker system includes two 5-1/4" woofers, 2 tweeters, and 2 external crossovers
- polypropylene woofer with butyl rubber surround
- "silk aluminum" dome tweeter
Loading...
Loading accessories...
Customer Q&A
3 questions already asked
Loading...
Loading articles...
The tweeters blend well with the woofers. Focal tweeters just always sound great in my opinion and these budget ones are no exception. Awesome build quality.
Matthew from Martinez, CA