Features

Integrated Amplifier: The Peachtree Audio nova150 integrated amplifier combines an ES9018K2M SABRE32 Reference DAC, ICEPower amplification, discrete headphone amplifier, and a MM Phono input circuit. Its combination of high output power, transparent sound, and digital and analog connectivity make it simple to enjoy all of your music with uncompromising sound quality.

ESS Reference 9018K2M Sabre32 DAC: The nova150 utilizes the highly regarded ES9018K2M SABRE32 Reference DAC. The ES9018K2M SABRE32 Reference DAC is capable of accepting an extremely wide range of inputs all the way up to 32-Bit/384kHz PCM and 5.2MHz DSD (double-DSD). The DAC exhibits exemplary dynamic range, jitter elimination and low noise characteristics to satisfy even the most demanding listeners.

ICEPower Amplification: The nova150 incorporates the latest generation of ICEPower amplification, with an impressive 150 watts per channel. The amplifier utilizes ICEpower's innovative and patented Hybrid Controlled Oscillation Modulator (HCOM) feedback and control techniques to ensure high output, wide bandwidth, low noise, robust stability and a simplified overall design. HCOM incorporates separate feedback loops after the power stage and after the output filter. This lets the system address specific issues related to the power stage and output filter independently, resulting in lower distortion, less noise on the output, a less load-dependent frequency response, and a very low output impedance compared to other class D amps. This new amplifier technology is extremely powerful, dynamic, quiet and most importantly - musical. Relatively small size and superior efficiency allows the nova chassis that is even smaller than its predecessors, without the large, heavy and expensive heat sinking common in class A/B amplifiers. The amplifier in the nova150 is capable of driving an extremely wide range of speakers with impedances as low as 2.5Ω and as high as 16Ω. Combine that with a power output of 150 watts per channel and you can be sure this new nova will easily drive your favorite loudspeaker.

Extensive Power Supply & Grounding Design: The nova150 utilizes an extensive power supply and grounding design to ensure the noise floor is pushed as far down as possible to allow the music to shine through. Peachtree's engineers spent hours upon hours determining the optimal power supply filtering and grounding scheme to prevent any unwanted noise from finding its way into the signal path. As a result, the nova150 achieves a remarkable dynamic range and signal-to-noise ratio. Turn up the nova150 to full volume without music playing, put your ear to the speaker and enjoy the lack of noise.

Asynchronous USB Inputs: The Nova150 includes an asynchronous USB-B for a computer and an asynchronous USB-A for Apple iOS devices with Lightning connector. The USB-A port also features exclusive Peachtree DyNEC (Dynamic Noise Elimination Circuit) technology.

• USB-B Input for Computer Audio (Windows or Mac): The Nova150's asynchronous USB-B input allows direct digital connection to your Windows or Mac computer for PCM and DSD audio playback. Asynchronous technology allows the digital clock inside Nova150 to control the flow of data coming from your computer. This method of communication leads to less jitter (timing errors) for the unit's ESS Reference Sabre32 DAC to deal with which results in clearer more defined sound. The unit supports 16-32bit, 44.1-384kHz PCM music files and 2.8824-5.6448MHz, 1-bit DSD music files. For playback of files above 96kHz, Windows requires installation of Peachtree Audio's USB 2.0 driver on your PC before it will be compatible.
• USB-A Input for Apple iOS Lightning Devices (w/ DyNEC): The Nova150 includes a dedicated asynchronous USB-A connection on the rear-panel that provides a direct digital wired connection to Apple iOS Lightning equipped devices. The exclusive Peachtree DyNEC (Dynamic Noise Elimination Circuit) eliminates all audible power supply and screen noise that can be created by plugging in an Apple iOS device. Once all sources of noise are eliminated, music files are "handed off" to our internal ESS SABRE32 Reference DAC - further improving performance via asynchronous connection, and eliminating any timing errors caused by jitter. With DyNEC and an asynchronous connection, Peachtree's dedicated iOS input lets you hear your music with all the clarity, dynamics and emotion the artist intended. Simply use the cable that came with your iPod touch, iPhone, or iPad and enjoy the music and apps of your mobile device with the DAC and sound quality of the Nova150. Compatible with the following Apple iOS Lightning equipped devices - iPod touch (5th gen and newer), iPhone (5 and newer), & iPad (Air/mini/Pro). Make sure your Apple device has the latest iOS version installed.

Optical/Coaxial Digital Inputs: The Nova150 is equipped with two optical (toslink) and one coaxial (RCA) digital inputs for connecting external digital audio sources such as your Blu-ray/DVD player or cable/satellite box. The optical and coaxial digital inputs support up to 16-24bit, 44.1-192kHz PCM 2ch audio.

Phono Input: The nova150 includes a moving magnet (MM) phono input for direct connection of a turntable. This custom designed Phono input circuit accommodates a wide range of MM cartridge outputs. With the nova150 you no longer need an external phono preamp unless you are using a lower output moving coil (MC) cartridge. In that case, the internal phono preamp in the nova150 can be bypassed, allowing the phono input to accept line-level signals from a dedicated phonoa preamp or any other line-level device.

Discrete Headphone Amp: The nova150 is outfitted with a newly designed, discrete low-impedance headphone amplifier. It can easily drive any headphones on the market, and drive them well. The signal-to-noise ratio of the circuitry will impress even the most die-hard headphone enthusiast. When you plug headphones in, the speakers and preamp outputs are automatically muted and the volume knob becomes a dedicated headphone volume controller. Unplug the headphones, and the system reverts back to being an integrated amplifier. The nova150 is fitted with a full-size 1/4" headphone jack on the front-panel.

Binding-Post Speaker Terminals: The unit's binding-post speaker terminals are clearly marked red-positive and black-negative for proper polarity connections. The amplifier's binding-post speaker terminals will accommodate bare wire (up to 10AWG), banana plugs (single only), & pin-connectors. Use speakers with a nominal impedance between 2.5-16Ω.

Home Theater Bypass (HTB): Home Theater Bypass (HTB) allows for easy integration with a multi-channel preamp/processor or audio/video receiver, so that the power amplifier in the nova150 drives the front left and right speakers for stereo and multi-channel listening. The nova150 amplifier section is likely more powerful and better sounding than many AV receiver available today, and relieving the AVR from driving the front left and right speakers makes it much easier for the receiver to drive the center and surround speakers. When listening to stereo music the nova150 becomes your control center, and you can enjoy the full benefit of its reference DAC and ultra-low-noise circuitry. If the HTB input isn't needed it can be configured as a standard analog line-level input.

Input/Output Loop & Preamp Output: The nova150 includes an extremely useful loop (output/input) feature, allowing you to add an external tube buffer, equalizer or other processor into the signal path as desired. The LOOP button on the remote control engages and disengages the loop audio path utilizing high-performance relays. The stereo RCA preamp-outputs allow you to use an external amplifier with the Nova150; they also provide connections for a powered subwoofer.

Volume Control Bypass ("Power Amp Mode"): The nova150 provides a Volume Control Bypass feature on its digital inputs which puts the nova150 into a "power amp" mode. This is particularly useful if you have a connected source with its own volume control. For example - if you have a favorite device or app with a volume slider built right into the interface, simply bypass the nova150 volume control for that input and use the app slider instead.

Remote Control: The nova150 comes supplied with an IR remote control for wireless operation of the integrated amplifier. The remote control offers the same functions as the nova150's front-panel controls, plus adds a mute button and basic playback control (Play/Pause & Previous/Next Track) for your connected Apple iOS Lightning equipped device. The remote is powered by two "AAA" batteries (supplied). The remote control IR sensor is located in the center of the nova150's front-panel. The integrated amp also includes a rear-panel IR input & 12V trigger output.

• IR Input: The IR input (3.5mm) accepts input from an Infrared (IR) repeater/distribution system.
• 12V Trigger Output: The 12V trigger output (3.5mm) enables power on/off control of another component with a 12V trigger input.

Optional Accessories: Peachtree Audio offers an optional Bluetooth receiver and WiFi module (both sold separately) for the nova150 integrated amplifier, so you can enjoy wireless audio playback.

• Bluetooth Receiver: The Peachtree BT1 add-on Bluetooth music receiver (731BT1, sold separately) enables wireless connection of your Bluetooth-enabled devices (such as your Apple iPod/iPhone/iPad, Android smartphone/tablet, Windows PC, Mac computer, etc.) to the nova150 integrated amplifier. Now, you will be able to listen to music files and music apps from your Bluetooth-enabled devices through the nova150. The BT1 Bluetooth receiver can plug into the nova150's stereo RCA analog input or optical digital input.
• WiFi Module (Coming Soon): The nova150 was designed to accommodate Peachtree's add-on Wi-Fi module (sold separately), which is currently under development (no ETA). Peachtree engineers have even reserved an input button on the front-panel for it. This will allow you to stream audio directly into the nova150 without the need for connecting any wires.