Skip Navigation

Audio-Technica AT-LP7

Manual belt-drive professional turntable with built-in phono preamp

3 Reviews | 1 question - 1 answer

Item # 057ATLP7

In Stock

Add to Cart

Ask an expert

Our VA-based experts can help.

1.844.238.5482

Chat Call Me

Overview

Our take on the Audio-Technica AT-LP7

The Audio-Technica AT-LP7 is designed to make your cherished vinyl sound exceptional. The pre-mounted AT VM520EB moving magnet cartridge offers top-notch performance, and a dense thermoplastic platter keeps distracting resonant frequencies at bay. With a solid MDF chassis, J-shaped tonearm, and gorgeous black finish, it looks every bit as good as it sounds.

A solid, elegant turntable

The Audio-Technica AT-LP7 is designed to make your cherished vinyl sound exceptional. The pre-mounted AT VM520EB moving magnet cartridge offers top-notch performance, and a dense thermoplastic platter keeps distracting resonant frequencies at bay. With a solid MDF chassis, J-shaped tonearm, and gorgeous black finish, it looks every bit as good as it sounds.

Versatile for the audiophile

This turntable gives you more options than most. It has its own phono preamp, so you can connect to any receiver, or plug directly into a pair of powered stereo speakers. The phono preamp also features a switch on the back that lets you use this ‘table with either a moving magnet or moving coil cartridge.  

Product Highlights:

  • built-in switchable phono preamp (phono/line)
  • phono preamp is compatible with moving magnet and moving coil cartridges
  • selectable speed: 33-1/3 or 45 rpm
  • J-shaped tonearm for accurate tracking
  • includes lightweight AT-HS10 headshell with pre-mounted Audio-Technica VM520EB moving magnet phono cartridge
  • speed-sensor system maintains accurate platter rotation speed
  • anti-resonance thermoplastic platter
  • signal to noise ratio: >60dB
  • wow and flutter: <0.2%
Included Accessories:
  • male-to-male RCA cable
  • 45 RPM spindle adapter
  • counterweight for accurate tonearm tracking
  • heavy rubber damping mat
  • removable hinged dust cover
  • power cable
Dimensions and Warranty:

What's in the Box:

  • Turntable
  • Tonearm (pre-installed)
  • Catridge w/ Stylus
  • AC power adapter (attached 5' DC cord)
  • Belt
  • Platter
  • 45 RPM adapter
  • Counterweight
  • Dust cover
  • 40" Stereo RCA cable
  • User Manual
Reviews

Audio-Technica AT-LP7 Reviews

Average Customer Review(s):

(3 Reviews)
rewards card
Great Gear Giveaway

Submit a review and enter to win a $350 rewards card

Review this product

Thanks for submitting your review

Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

Your Review

Use the stars below to rate the overall product on a scale of 1-5
1500
Upload your photos

Not visible. Email associated with order.
(e.g., Charlottesville, VA)

Additional Fields (optional)

500
500

By submitting this review, you agree to our terms and review guidelines.

Filter by rating

Customer photos


<< >>
Details

Hands-on research

Features and Specs

Features
Operation Manual
Speeds 33-1/3, 45
Cartridge Type MM
Phono Preamp Built-in
USB Output No
Pitch Control No
45 RPM Adapter Yes
Specs
Signal to Noise Ratio 60
Wow and Flutter 0.08
Weight 18.3 lbs.

Product Research

Features

Belt-Drive Turntable: The Audio-Technica AT-LP7 is a fully manual, belt-drive turntable with two operation speeds (33-1/3 and 45 RPM). The AT-LP7 turntable's motor features a speed-sensor system to maintain accurate platter rotation speed at both speeds.

Anti-Vibration Construction: The turntable chassis is constructed of 40mm thick MDF (medium density fiberboard), an excellent anti-vibration damping material that limits low-frequency acoustical feedback. The anti-resonance platter is made of 20 mm-thick polyoxymethylene and is driven by a sensor-monitored motor that ensures a continuously accurate platter rotation (no mat is included). The integrated anti-resonance feet provide a stable foundation.

J-Shaped Tonearm: The headshell attaches to a J-shaped tone arm that takes its inspiration from the classic A-T models of the 1960s and '70s. The tone arm features a metallic gimbal suspension system and precision bearings to mitigate tracking errors, and includes an adjustable counterweight and anti-skate control. The height of the tone arm can be adjusted from 0 mm to 6 mm to accommodate a wide variety of cartridges.

Dual Moving Magnet Stereo Cartridge: The AT-LP7 comes with a VM520EB Dual Moving Magnet Cartridge with a 10 g AT-HS10 headshell and 0.3 x 0.7 mil elliptical bonded stylus (the cartridge will need to be installed - see User Manual). The VM520EB Dual Moving Magnet Cartridge also features an aluminum cantilever and durable low-resonance polymer housing, as well as paratoroidal coils that improve generating efficiency and a center shield plate between the left and right channels to reduce crosstalk.

  • Frequency Response: 20-23,000 Hz
  • Channel Separation: 27 dB (1 kHz)
  • Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)
  • Stylus Construction: Bonded round shank
  • Recommended Load Impedance: 47,000 ohms
  • Output: 4.5 mV (at 1 kHz, 5 cm/sec)
  • Channel Balance: 1.5 dB (1 kHz)
  • Stylus Shape: 0.3 x 0.7 mil elliptical
  • Cantilever: Aluminum pipe
  • Mount: 1/2"
  • Replacement Stylus: Part # VMN20EB
  • Coil Impedance: 2,700 ohms (1 kHz)
  • DC Resistance: 800 ohms
  • Load Capacitance: 100-200 pF
  • Coil Inductance: 460 mH (1 kHz)
  • Static Compliance: 35 x 10-6 cm/dyne
  • Dynamic Compliance: 8 x 10-6 cm/dyne (100 Hz)
  • Vertical Tracking Angle: 23°
Note: The stylus can be replaced with any of the other six styli available in the VM line, giving you an easy means of upgrading the stylus without buying a whole new cartridge.

MM/MC Operation: The AT-LP7 can be set for moving magnet (MM) or moving coil (MC) operation. If using the included or other type of moving magnet cartridge, set the MM/MC Cartridge Selector Switch  to the "MM" position. If using a moving coil (MC) cartridge (sold separately), set this switch to the "MC" position. The MM/MC Cartridge Selector Switch  is set to the "MM" position out of the box, since the included VM520EB cartridge is a moving magnet (MM) type cartridge.

Note: The included cartridge is an MM cartridge. MC cartridges are sold separately.

Switchable Preamp: The AT-LP7 features a built-in switchable phono/line preamp that enables it to be connected directly to a computer, home stereo, powered speakers, and other components that have no dedicated turntable input.

Stereo RCA Output: The AT-LP7 is outfitted with a set of stereo RCA outputs and includes a 40" stereo RCA cable to connect to your AV receiver, integrated amplifier, or powered speakers. Use the "GND" terminal to connect the grounding line of the RCA cables to the ground terminal of the amplifier.

Dust Cover: The Audio-Technica AT-LP7 turntable comes with a dust cover that is also removable. The dust cover simply rests on top of the turntable (there are no hinges).

  • Dimensions with Dust Cover: 18.0625" (w) x 6.125" (h) x 15.4375"
  • Dimensions without Dust Cover: 17.75" (w) x 5.625" (h) x 15.3125"

AC Power Adapter: The Audio-Technica AT-LP7 includes an external AC power adapter with an attached 5' DC cord.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Q & A

Customer Q&A

1 question already asked

That's a tough question, I have both and I'm happy with both. I do love the look of the AT but as far as performance you will be happy with either one. [ DOMENICO  May 12, 2018 ]
Articles
 
 
 
 

would like to send you to a different page.

Go there