Sennheiser e 602-II
Large-diaphragm cardioid dynamic microphone
California customers: click here for your Proposition 65 warning.Please
Item # 143E602II | MFR # 500797
$159.99 Earn up to 160 Rewards points
Offers & Financing
Our take on the Sennheiser e 602-II by Crutchfield's Ralph Graves
Made for bass
The Sennheiser e 602-II was designed for accurately capturing low-frequency sound. It's ideal for miking kick drums, bass guitar cabs, tubas, and other low-pitched instruments. The mic features a built-in stand adapter for placement flexibility. And because its body is lightweight aluminum, it can be used on an extended boom for overhead miking.
Quality construction for optimal performance
The e 602-II features a humbucking design that cancels out unwanted low-frequency hum and electronic noise. And the voice coil's lightweight, high-performance construction ensures fast transient response, for clear sound with lifelike dynamics.
- dynamic microphone
- designed for low-frequency instruments like drums, bass, tuba
- cardioid polar pattern
- humbucking design to cancel interference and hum
- lightweight aluminum body
- fast transient response
- low frequency extension
- integrated stand mount
- frequency response: 20-16,000 Hz
- output impedance: 350 ohms
- sensitivity: 0.25mV/Pa
- 6" length x 2-3/8" diameter
- weight: 11.2 oz.
- XLR connector
- microphone pouch
- warranty: 10 years
- Our 60-day money-back guarantee
What's in the Box:
- Stand mount (attached to mic)
- Nylon carry-pouch
- Instruction manual (Eng / Span / Fren / Others)
Features and Specs
|Application||For live & studio use|
|Max SPL||Not given|
|Parts Warranty||2 Years|
|Labor Warranty||2 Years|
Overview: The Sennheiser E602II is a dynamic microphone with a cardioid pattern, designed especially for bass frequency instruments such as kick drums, bass guitar amps, and brass instruments. It has a tailored frequency response that emphasizes the low and high frequencies with a cut in the midrange. Other features include a fast transient response, low-frequency extension, a lightweight high-performance voice coil , and an integrated stand mount. It's rugged, lightweight aluminum body allows for stable positioning on long boom arms.
Polar Pattern: The E602II has a cardioid polar pattern, which has maximum sound pickup directly in front of it, slightly less pickup from the sides, and no pickup from the rear of the mic.
Connection: The E602II provides a balanced output on a standard male, 3-pin XLR connector.
Stand Mount: The integrated stand mount on the E602II allows approx. 180˚ of tilt and has a 3/8" threaded socket.
- Transducer Type: Dynamic
- Pick-up Pattern: Cardioid
- Frequency Response: 20 Hz - 16 kHz
- @ 1 kHz: 0.25 mV/Pa
- @ 60 Hz: 0.9 mV/Pa
- Nominal Impedance: 350 Ohm
- Min. Terminating Impedance: 1000 Ohms
- Connector: 3-Pin XLR
- Length: 6.02"
- Diameter: 2.38"
- Weight: 11.217 oz.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
Frequently Compared With
Sennheiser e 602-II
Large-diaphragm cardioid dynamic microphone$159.99
Shure BETA 58A
Supercardioid dynamic microphone
Sennheiser e 902
Large-diaphragm cardioid dynamic microphone$199.99
Shure Beta 52A Kick Drum Package
Includes Shure Beta 52A microphone, K&M tripod stand with boom, Whirlwind mic cable$226.99$286.97