Skip Navigation

Monitor Audio Silver 8

Floor-standing speaker (Rosenut)

17 Reviews | 3 questions - 4 answers

Item # 893SLVR8R

Low Stock

Outlet: Scratch & Dent

 Ships FREE

Was: $849.99

Outlet Savings: -$82.87

Add to Cart

Ask an expert

Our VA-based experts can help.


Chat Email


Our take on the Monitor Audio Silver 8

Lots of speakers make sound that can fill your room just fine. But Monitor Audio's Silver 8 delivers a dynamic, edge-of-your-seat performance that positively owns it. Experience warm, natural sounding vocals, tightly focused and textured instrumentals, plus a punchy, deep bass attack that can bring your favorite recordings to life.

This beauty is a beast

Lots of speakers make sound that can fill your room just fine. But Monitor Audio's Silver 8 delivers a dynamic, edge-of-your-seat performance that positively owns it. Experience warm, natural sounding vocals, tightly focused and textured instrumentals, plus a punchy, deep bass attack that can bring your favorite recordings to life.

Monitor Audio Silver 8 in Black Oak

Advanced driver design and cabinet construction ensure the Monitor Audio Silver 8 delivers your music and movie soundtracks with breathtaking clarity and detail.

Excellence by design

Every Silver series speaker incorporates Monitor Audio's gold dome tweeter for smooth, detailed highs. The domes are made from a ceramic-coated aluminum/magnesium alloy originally developed by the aerospace industry for jet engine components, then anodized with a layer of gold for ideal stiffness and damping characteristics. Their extremely low mass and high rigidity allow these tweeters to play accurately far beyond the range of human hearing with little to no audible distortion, making them an excellent choice for high-resolution music listening.

The Silver 8's 3-way design incorporates two ultra-rigid 6" woofers and a separate 4" midrange driver for tight, powerful bass and clean, accurate midrange. Created from the same lightweight alloy as the tweeters, these drivers are strengthened and stiffened even further by adding a pattern of dimples to the surface of the cone. The dimples help resist bending and twisting that cause distortion while allowing the use of thinner, lighter, more responsive cones.

Further refinements to ensure powerful performance

Meticulous engineering and many hours of listening go into each Silver series speaker. Monitor paid close attention to important design elements — both visible and hidden. At its heart, the Silver 8 uses a sophisticated crossover network with premium-grade components. Monitor also chose their Pureflow® Silver-plated OFC wire to make all internal cabling connections. Together, these refinement provide better driver integration and faster transients for smooth sound with real presence and immediacy.

Instead of conventional mounting screws, each driver is held in place using a single tensioned rod, or through-bolt, that threads into its back plate then secures to back of the cabinet. The bolt not only acts as a rigid cabinet brace to reduce box coloration, it also eliminates the need for traditional driver mounting hardware, effectively decoupling the driver and front baffle to eliminate another source of unwanted resonance. The lack of visible mounting hardware also adds to the overall look of elegance. 

Monitor thoroughly engineered the Silver 8's bass-reflex ports, as well. This new type of port design utilizes straight, rifled grooves inside the port to accelerate air flow and reduce turbulence compared to conventional ports. This ability to move air in and out of the cabinet more quickly provides faster, more powerful bass and superior transient response.

A solid cabinet with a luxurious finish

Monitor Audio speakers have long been known for their sturdy, vault-like cabinet construction. The Silver 8's enclosure is built solid to resist vibration that can color sound and reduce accuracy. The exterior comes clad in your choice of a beautifully finished walnut, rosenut, or black oak wood veneer, as well as high-gloss black lacquer.  Base plinths are provided for added stability and a solid foundation for superior acoustics. Spikes are supplied to accommodate installing the speaker on carpeting, and non-slip polymer pads are also included to protect wood floors. An attractive "floating" magnetic grille that features invisible attachments gives the Silver 8 a clean, classic look whether you use it with the grille on or off.

Product Highlights:

  • frequency response: 32-35,000 Hz
  • sensitivity: 90 dB
  • recommended amplifier power: 80-200 watts
  • impedance: 4 ohms
  • ultra-rigid, lightweight C-CAM® (Ceramic-Coated Aluminum/Magnesium) cone material used to provide high efficiency and low distortion
  • 1" C-CAM gold dome tweeter for detailed sound and extended high-frequency response
  • 4" C-CAM midrange with RST® (Rigid Surface Technology) to enhance stiffness and reduce mass for greater speed and accuracy
  • dual 6" C-CAM RST woofers for powerful, low-distortion bass
  • single bolt-through driver attachment provides mechanical decoupling and increased cabinet rigidity for greater clarity and resolution
  • bass reflex (ported) design with HiVe® II technology for reduced turbulence and higher velocity airflow
  • high-quality crossovers with polypropylene film capacitors for greater accuracy
  • dual five-way binding post speaker terminals with bi-amp/bi-wire capability
  • detachable base stabilizers with included polymer pads and carpet spikes
  • high-gloss black lacquer finish
  • 9-5/8"W x 40-3/16"H x 14-3/16"D
  • weight: 51.3 lbs.
  • warranty: 5 years
  • Our 60-day money-back guarantee

What's in the Box:

  • Floorstanding loudspeaker
  • Grille
  • Base
  • One foam port plug
  • 4 Bolts
  • 4 Spike feet
  • Owner's Manual
  • Important Safety Instructions

Scratch & Dent items may be missing non-essential accessories. In some cases the manufacturer's accessories have been replaced with generic equivalents.

I've had the monitor 8's for one week and just finished breaking them in. They sound GREAT!! I wouldn't hesitate to recommend them to anybody looking for a GREAT sounding floor standing speaker. Also at a GREAT price!! Thank you Duane

Duane, Albany, CA


Monitor Audio Silver 8 Reviews

Average Customer Review(s):

(17 Reviews)
rewards card
Great Gear Giveaway

Submit a review and enter to win a $350 rewards card

Review this product

Thanks for submitting your review

Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

Your Review

Use the stars below to rate the overall product on a scale of 1-5
Upload your photos

Not visible. Email associated with order.
(e.g., Charlottesville, VA)

Additional Fields (optional)


By submitting this review, you agree to our terms and review guidelines.

Filter by rating

Customer photos

<< >>

Hands-on research

Features and Specs

Enclosure Bass Reflex
Finish MDF/Wood veneer
Color Rosenut
Tweeter Dome
Tweeter Size (inches) 1
Midrange Size (inches) 4
Woofer Size (inches) 6
Woofer Composition C-CAM/RST
Woofer Surround Rubber
Built-in Powered Sub No
Video-Shielded No
Connector Type Post
Bi-amp Inputs Yes
Parts Warranty 5 Years
Labor Warranty 5 Years
Power Range 80-200
Frequency Response 32-35k Hz
Sensitivity 90 dB
Impedance (Ohms) 4
Subwoofer Amp Power ---
Height (inches) 41-3/4
Width (inches) 9-5/8
Depth (inches) 14-3/16
Weight 51.3 lbs

Product Research


3-Way Speaker Design: The Monitor Audio Silver series 8 floorstanding loudspeaker employs a 3-way driver design with a single 1" C-CAM gold dome tweeter, one 4" C-CAM/RST midrange driver and two 6" C-CAM/RST long-throw bass woofers. This 3-way configuration is optimized for greater accuracy over a critical frequency band to deliver superb midrange focus and precision, as well as extended bass and crystal clear high frequencies.

  • Newly Designed Tweeter: A new C-CAM gold dome tweeter design with damped rear chamber and innovative dome venting technique improves clarity and widens operating bandwidth.
  • Specially Designed Midrange Driver: A specially developed 4" mid-range driver with an "under-hung" voice coil and motor system ensures very low distortion.
  • Dual Bass Drivers: Dual 6" bass drivers featuring a concave "dished" C-CAM cone profile allows for better damping and improved midbass clarity.

C-CAM Technology: C-CAM driver technology is used throughout the Silver series 8 floorstanding loudspeaker, providing coherent tonal balance and sonic signature across the entering audio frequency spectrum.

  • C-CAM Gold-Dome Tweeter: The gold dome tweeter is formed from a ceramic-coated aluminum/magnesium alloy, gold anodized to a specific thickness for ideal stiffness and damping characteristics. Its new profile and surround geometry have been developed using advanced modeling tools, to provide the optimum qualities for accurate sound reproduction. The new design moves the first order of breakup to beyond 35kHz, producing a linear response way beyond audibility, which matches the wide frequency bandwidth available from HD music and cinema sound formats. The gold dome is thinner, lighter, more rigid and therefore more efficient than domes made from other materials which are prone to distortion in the audio band.
  • C-CAM Cone Midrange Driver and Bass Woofers: Ceramic-Coated Aluminum/Magnesium is a material originally developed by the aerospace industry for jet engine components. Its properties are ideal for loudspeaker cones being extremely rigid, yet light enough to yield high overall efficiency. In manufacture, aluminum/magnesium alloy undergoes a three-stage stress-relieving process to remove surface deformation and molecular weakness. Once formed, the alloy cone is subjected to a high temperature anodic coating process in which a layer of pure ceramic alumina is depleted onto its surfaces to a depth of 50 microns, producing a completely rigid sandwich of alloy and heat-dissipating ceramic material. Conventional cones are liable to flex or twist in operation, producing a significant level of audible distortion. C-CAM cones have a much higher resistance to bending stress and therefore exhibit much greater fidelity over their entire operating range.

RST (Rigid Surface Technology): The Silver series 8 floorstanding speaker combines Rigid Surface Technology (RST) with its C-CAM cone woofer design for a stronger, lighter weight cone. The Rigid Surface Technology (RST) cone profile was inspired by the Japanese art of Origami, which demonstrates how a very light material (like paper) can be strengthened and made more rigid by making small and precise folds on it surface. Developed and perfect using sophisticated computer modeling (Finite Element Analysis), the Silver series midbass drivers have been strengthened by a pattern of dimples. RST significantly increases cone rigidity, allowing the radiating surfaces to resist mechanical bending forces, which can twist the  shape of conventional driver cones to produce distorted sound. The strengthening effect of RST means that Monitor Audio can use thinner, lighter and more responsive C-CM cones which provide speed and accuracy while offering greatly reduced distortion. The RST patterns also help to displace standing waves that can propagate on the cone's surface.

Single Through-Bolt Mount: The tweeter, midrange driver, and bass woofers are fixed to the cabinet with single through-bolt driver fixing mounts. This single-through-bolt mount design provides mechanical de-coupling and enhanced midband clarity and resolution. The through-bolts also act as rigid cross bracing to give a very solid non-resonant cabinet.

MDF Enclosure w/ Magnetic Grille: The Silver 8 employs a MDF enclosure for accurate, uncolored sound. Rigid 20mm MDF construction is used throughout the enclosure with radial and cross-bracing techniques for high rigidity and low cabinet coloration. The tall, shallow cabinet and improved damping allows for greater room position flexibility. In addition, the tower speaker comes with an acoustically transparent cloth grille.

HiVe II Bass Reflex Port: The Silver 8 uses a bass reflex cabinet (dual rear firing ports) with Monitor Audio's HiVe II port design for greater efficiency and bigger bass response from a slim tower speaker. The HiVe II bass reflex port is shaped to have the same effect on airflow as a gun-barrel on a bullet. Rifled grooves inside the port help to accelerate the flow and reduce turbulence, so air moves in and out of the port more efficiently, for a faster more dynamic bass response.

Note: If the bass is too boomy, you can insert the included foam port plug into the speaker's lower rear firing port to tighten and lessen the bass.

High Quality Crossover & Wiring: The Silver 8 uses high quality crossovers (LF/MF=500Hz, MF/HF=2.7kHz) with premium grade polypropylene film capacitors. The speaker also utilizes "Pureflow" silver plated OFC copper internal cabling.

Dual Gold-Plated Binding Posts: The floorstanding loudspeaker has two sets of gold-plated binding posts connected by wire-jumpers. The gold-plated binding posts will accept bare wire (up to 10AWG), pin connectors, spade connectors, & banana plugs (single only). Using the dual posts, you can bi-wire or bi-amp the speaker. Bi-wiring or bi-amping the speaker provides improved bass & treble performance. If you decide to bi-wire or bi-amp, you must remove the jumpers between the terminal posts (failure to do this could result in damage to your amplifier and loudspeakers).

  • Bi-Wiring: Bi-wiring can provide noticeable improvements in the overall transparency of your loudspeakers. Run separate speaker wires to the low & high frequency drivers from a single amplifier (the upper set of binding posts are for the high frequency drivers; the lower set of binding posts are for the low frequency drivers).
  • Bi-Amping: Bi-amping allows you to use separate amplifiers for the high & low frequency sections of your loudspeaker for greater dynamic range & lower distortion. We recommend that your separate amplifiers have identical gain to preserve the speaker's voicing balance.
Note: The binding-post speaker terminals are color-coded (red+/black-) and are at floor-level for easy identification and hookup.

Base with Rubber or Spiked Feet: The Silver series 8 floorstanding speaker includes a base which will need to be installed or you can choose to use the speaker without the base. In addition, the Silver 8 comes with four feet assembly which can be used as rubber feet or spikes (the spikes simply unscrew from the feet assembly in order to use them as rubber feet). The spike feet are great for carpeted floors, while the rubber feet are recommended for hardwood and tile floors. Dimensions will vary based on base and foot configuration.

  • with Base & Spikes: 9.625" (w) x 41.75" (h) x 14.1875" (d)
  • with Base & Rubber Feet: 9.625" (w) x 41.125" (h) x 14.1875" (d)
  • with only Spikes (no base): 7.3125" (w) x 40.75" (h) x 13.25" (d)
  • with only Rubber Feet (no base): 7.3125" (w) x 40.125" (h) x 13.25" (d)
Note: The feet thread into the bottom of the speaker or base, and are adjustable to level the speaker up with your floor.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Q & A

Customer Q&A

Crutchfield asked  
Why did you buy this?

pricing and reviews [ WILLIAM J  Mar 11, 2017 ]
I have the Silver 6's. They sound great. [ John  May 05, 2016 ]
Amazing build and sound quality [ Owen James  Oct 01, 2016 ]
The reviews and friends! [ Gordon  Jul 30, 2016 ]

3 questions already asked

I checked with a manager at the C'ville store, and they said: We do have them profiled and available to listen to in the virtual room, but we don't have those physically on display in the store. [ Jeff  Aug 21, 2015 ]  Staff
I would not recommend using these speakers with a receiver that is not rated for 4-ohm speakers. The lower ohm rating will cause the amplifier to work harder and may end up damaging your receiver. [ Jeff  Jan 28, 2015 ]  Staff
John, Using 4 ohm speakers with your receiver will cause it to put out more wattage at the same volume setting. From what I understand, decreasing the speaker impedance by half will cause the amp in the receiver to output about 50 percent more power at the same setting which will lead to increased heat output as well. Your receiver may overheat depending on how high you have the volume set. At low volumes this shouldn't be a problem but at higher volumes you will have more heat and distortion from the amp. I've heard of people having their receiver overheating running 4 ohm speakers. When I bought these speakers I ended up buying a dedicated amp that is rated for 200 watts per channel at 8 ohms and 300 watts per channel at 4 ohms just to be safe. BTW, I love the speakers. [ Mark  Jan 28, 2015 ]
I forwarded your question to an Advisor and they responded with the following: You can use those speakers on the front left and right channels only. For the rest of the channels on the receiver the speakers would need to be 6 or 8 ohms. If you would like to discuss further you can contact an Advisor directly by phone (1-800-324-9695) or online chat. [ Krissy  Jan 07, 2015 ]  Staff