Skip Navigation

Sanus VLC1

Swivel mount for curved TVs 40"-88"

5 Reviews

Overview

Our take on the Sanus VLC1

The Sanus VLC1 swivel mount lets you adjust the angle of your curved TV. You can swivel the TV left or right up to 10° for optimal viewing from more seats in your room. The mount features an open back plate so you can route cables into the wall for a clean, uncluttered appearance. The VLC1 can easily be shifted to the right or left, in case the wall studs are a little off-center. A quick-latching mechanism makes it easy to secure your TV to the mount without having to reach behind it.

Sanus VLC1

Optimize viewing for curved TV

The Sanus VLC1 swivel mount lets you adjust the angle of your curved TV. You can swivel the TV left or right up to 10° for optimal viewing from more seats in your room. The mount features an open back plate so you can route cables into the wall for a clean, uncluttered appearance. The VLC1 can easily be shifted to the right or left, in case the wall studs are a little off-center. A quick-latching mechanism makes it easy to secure your TV to the mount without having to reach behind it.

Will this mount work with my TV?

Use the Sanus MountFinder™ to see a list of mounts that work with your specific TV.

Where do I drill the holes?

Tell the Sanus HeightFinder™ Installation Assistant how high you want your TV, and it tells you exactly where to drill.

Product Highlights:

  • fits most curved screen TVs 40"-88"
  • heavy-gauge steel construction
  • supports up to 150 lbs.
  • holds TV 2-5/8" from wall (at center)
  • swivel range: ±10°
  • stud-mounting required
  • quick-latching mechanism holds TV securely to the wall
  • movable brackets for off-center stud placement
  • includes all necessary hardware
  • open base plate for routing cables
  • 30"W x 16-15/16"H x 2-5/8"D
  • warranty: 5 years
  • Our 60-day money-back guarantee

What's in the Box:

  • TV bracket
  • Wall plate
  • Four M8 x 20mm screws
  • Four M8 x 25mm screws
  • Four M8 x 30mm screws
  • Four M8 x 35mm screws
  • Four M8 x 40mm screws
  • Four M8 washers
  • Four 22mm spacers
  • Four 5/6" x 2-3/4" lag-bolts
  • 4 Wall-anchors
  • 4 Cable-ties
  • 3/16" Hex-key
  • Level/Stud-Finder tool
  • Instruction Manual

This item was designed for curved tv's and it attached to the back of our Samsung 65" without any issue. The frame is super strong and sturdy. I looked elsewhere and found many mounts that were very flimsy and wondered if they could support a small tv on the wall let alone a 65" one.

Vicki, Athens, OH

Reviews

Sanus VLC1 Reviews

Average Customer Review(s):

(5 Reviews)
rewards card
Great Gear Giveaway

Submit a review and enter to win a $350 rewards card

Review this product

Thanks for submitting your review

Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

Your Review

Use the stars below to rate the overall product on a scale of 1-5
1500
Upload your photos

Not visible. Email associated with order.
(e.g., Charlottesville, VA)

Additional Fields (optional)

500
500

By submitting this review, you agree to our terms and review guidelines.

Filter by rating

Customer photos


<< >>
Details

Hands-on research

Product Research

Features

Swivel Wall-Mount for Curved TVs: The Sanus VLC1-B1 swivel wall-mount bracket was designed specifically for use with today's curved LED-LCD & OLED TVs. This mount was engineered with 10° of swivel left and right of center, the ideal viewing range is increased by 20° compared to having a curved TV on a stand or fixed wall-mount. By mounting your curved TV, you can make more than just one seat in your room the perfect seat to get the immersive curved TV experience.

TV Capacity: The Sanus VLC1-B1 wall-mount bracket is designed to support curved LED-LCD & OLED TVs from 40" to 88", weighing up to 150 lbs.

VESA Bolt Pattern w/ M8 Hardware:  The Sanus VLC1-B1 wall-mount bracket will accommodate the following VESA hole patterns in accordance with industry standards set by the Video Electronics Standards Association.

  • 400mm x 400mm (using M8 hardware)
  • 600mm x 400mm (using M8 hardware)
Note: This wall-mount bracket only comes with M8 hardware. Additional hardware may be required for your specific model of TV. For example; shorter or longer screws, thicker or slimmer washers or spacers. These additional accessories can often be found at your local hardware store.

Perfect Positioning: The Sanus VLC1-B1 allows height, level, and side-to-side adjustments after installation for perfect positioning of your curved TV on the wall.

Steel Construction: The VLC1-B1 swivel wall-mount bracket bracket is constructed of heavy-gauge steel with a durable powder-coated black finish. This solid construction provides strength and increased safety.

Safety Tabs: Once the wall-plate is anchored to the wall studs and the TV bracket is attached to the back of your curved television, the TV bracket hooks into the wall-plate. Integrated safety tabs on the TV bracket provide a safe and easy connection to the wall-plate you can hear. There are two straps on the TV bracket which allow you to disengage the safety tabs and remove your curved television from the wall-plate.

Cable Management: The VLC1-B1's open wall-plate design allows you to easily route cables behind your curved TV and accommodate a standard size electrical outlet. Wire ties are included to help tidy up your TV's wires and cables.

16" or 24" OC: The  VLC1-B1's wall plate must be mounted to wall studs or anchored to a brick, block, or concrete wall using the supplied lag bolts (and wall-anchors). The slots in the wall plate can accommodate a variety of stud spacing, allowing you to easily mount the VLC1-B1 to wall studs that are 16" or 24" on center.

Installation Tools: The following tools are recommended for mounting the VLC1-B1:

  • Stud finder/Level tool (included)
  • Tape measure
  • Pencil
  • Awl
  • Drill
  • 7/32" Drill bit (for wood stud)
  • 3/8" Drill bit (for masonry)
  • 1/2" Socket wrench
  • Screw driver
  • Hammer

Dimensions:

  • Wall Plate:
    • Width = 30.0625"
    • Height = 9.5625"
    • Depth = 0.5"
  • TV Brackets:
    • Width =  25.375"
    • Height = 16.9375"
    • Depth = 2.3125"

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Q & A

Customer Q&A

Crutchfield asked  
Why did you buy this?

No good reason. [ Margaret  Apr 07, 2018 ]
After watching a video we determined that this was the best choice for our Samsung 65" Curved TV. [ Jose  Mar 26, 2018 ]
It was Recommended for curved TVs. [ Steamfitters Lo  Jun 19, 2017 ]
Having the ability to turn the Curved TV for optimum viewing experience was important to me. [ Michael  Mar 18, 2017 ]
Ease of use. And fits my tv [ Jonathan  Dec 20, 2016 ]
Sanus makes great products fit and finish [ Martin  Nov 23, 2016 ]
Articles