Klipsch CDT-2800-C II
Item # 714C2800C2 | MFR # 1014140
This item is no longer available.
Our take on the Klipsch CDT-2800-C II by Crutchfield's Marshall Chase
Enjoy great sound throughout your house with Klipsch® CDT-2800-C II ceiling-mount speakers. Their high-tech design and solid construction deliver ear-pleasing results for movies or music. Use them as surround sound speakers in an all-Klipsch home theater, or install them in pairs for stereo listening with your multi-room audio system. Either way, you'll experience accurate Klipsch sound without the clutter of conventional speakers.
Ready, aim, music!
The '2800-C II's tweeter gives you 100-degree dispersion, and it swivels, so you can aim the sound precisely where you need it to go. You can even rotate the woofer a full 360 degrees and tilt it up to 15 degrees in any direction. This flexibility gives you full, detailed sound no matter where you place the speaker.
Horn technology for room-filling sound
Because high-frequency sounds are more directional than bass frequencies, it's especially important to target them toward your ears. Klipsch places their tweeter inside a flared opening, known as a "horn," which disperses the highs evenly across your listening area. This design brings out details in everything you listen to, while reducing reflections that can color the sound. The horn also improves dynamics and efficiency, for powerful, "front row" sound that remains crystal-clear at all volume levels.
Slimmer chance of being seen
The '2800-C II keeps a low profile with its SlimTrim™ magnetic grille. The visible frame size is reduced by 90% and grille depth is reduced by 80% over previous designs, for a nearly flush finish that blends in beautifully. The paintable,aluminum, magnetic grille attaches securely with ease to virtually eliminate resonant distortion.
An optional in-ceiling bracket is recommended for installing the CDT-2800-C II in new construction.
Got wire?Most speakers don't include any. Learn more about in-wall wiring.
Shop our selection of in-wall speaker wire.
- swiveling Tractrix® horn with 1" silk dome tweeter
- pivoting 8" polypropylene woofer
- power handling: up to 50 watts RMS (200 watts peak)
- frequency response 65-20,000 Hz (±3dB)
- sensitivity 93 dB
- 8-ohm impedance
- paintable SlimTrim magnetic grille
- cutout dimensions: 9-13/16" diameter
- mounting depth: 5-1/8"
- warranty: lifetime
- Our 60-day money-back guarantee
What's in the Box:
- Ceiling-mount speaker
- White metal mesh grille
- Cardboard template
- Owner's Manual (En/Fr/Sp)
Speakers installed easily. Sound is great. Deep bass and clear mid and high range. Painted covers to match ceiling and hardly noticeable. Spray painting and paint applied easily, clean, quick.
Klipsch CDT-2800-C II Reviews
Average Customer Review(s):
Thanks for submitting your review
Features and Specs
|Quantity in Package||Single|
|Power Range (Watts)||50|
|Connector Type||Spring clips|
|Parts Warranty||Ltd. Lifetime|
|Labor Warranty||Ltd. Lifetime|
Controlled Dispersion Technology (CDT): The Klipsch CDT-2800-C II in-ceiling speaker features a patent-pending gimbal mechanism, known as Controlled Dispersion Technology (CDT). The tweeter and woofer are independently adjustable, allowing both the high and low frequencies to be directed toward the listening area.
High Efficiency: The high-efficiency design of the Klipsch in-ceiling speakers allows you to get much more output than most in-wall and in-ceiling speakers. Due to the long speaker wire runs that are common in whole-house audio systems, the power coming from the amplifier is significantly reduced by the time it reaches the speakers. The 93dB efficiency of this speaker means it will play much louder at low power than other less-efficient speakers.
2-Way Driver Design: The Klipsch CDT-2800-C II uses a high-quality 1" silk dome compression driver (tweeter) mated to an exclusive Tractrix Horn, combined with a 8" polypropylene woofer in a 2-way design.
- Tweeter: There is a 1" silk dome tweeter mated to a swiveling 100° Tractrix Horn. The swiveling horn design dramatically increases efficiency by enabling the speaker to produce more output using less energy. The horn-loaded tweeter allows you to point the sound to a specific location, and has more controlled directivity than a conventional dome tweeter.
- Woofer: The 8" polypropylene woofer can rotate a full 360°, and then shift 15° in any direction. This dense, yet lightweight, polymer cone can reproduce authoritative bass.
Speaker Terminals: The speaker has a pair of spring clips that can accept up to 12-gauge wire or pin connectors.
ABS Basket/Frame: The CDT-2800-C II has a sturdy ABS basket and frame. The frame can be painted to match any decor.
SlimTrim Magnetic Grille: With an all new grille, the visible frame size is reduced by 90% and grille depth is reduced by 80% over the previous design, for a more edge-to-edge consistent look that blends in with the wall more attractively. The new aluminum, paintable, magnetic grille attaches tightly and securely with ease to virtually eliminate resonant distortion.
Power Specifications Note: The manufacturer has specified the maximum power handling of this speaker as 50 watts RMS (200 W Peak). Klipsch has also published a recommended amplifier power specification as 100 watts.
Installation: The speaker can be installed in new or existing construction. It requires a cutout diameter of 9.8125". For new construction, purchase of the IK-800-C installation kit (714IK800C, sold separately) is highly recommended. For existing construction, the speaker should be installed in drywall at least 3/8" thick. It can also be installed in a drop ceiling (2' x 2' or 2' x 4' ceiling tiles only). In both cases, to maximize the acoustic performance of the in-ceiling speakers, Klipsch recommends you replace the original mounting panel with 1/2" or 3/4" plywood or MDF. A cardboard template is included to assist you in making the cutout.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
Why did you buy this?
customer request [ Cody Jul 06, 2017 ]
Wanted a set of speakers in dining room ceiling that produced great sound. Saw these at Crutchfield - great place for wealth of information, Then went to listen at local store to verify what was documented produced sound the way I liked. Then came back to Crutchfield to the great buying experience. [ Patrick Jun 22, 2017 ]
I like the idea of softer silk tweeters [ Aman Jan 04, 2017 ]
I wanted something that would work with the theater system and keep up with the floor standing RF-82 and other surround speakers. These speakers not only do that but are very attractive as they sit very flush to the ceiling. I am very pleased with their sound capabilities. [ David Dec 06, 2015 ]
1 question already asked
I can's see why not but you would have to use their special color coded connectors. [ Mark Jun 30, 2014 ]
Yes this speaker works well as a speaker for the center channel. The speaker has only one input so stereo capablities with this speaker is not possible. [ KEVIN Jun 19, 2014 ]