Kicker Resolution RMB8
8" Free-air Mid-Bass Speakers
Item # 206RMB8 | MFR # 02RMB8
This item is no longer available.
Our take on the Kicker Resolution RMB8 by Crutchfield's Todd Cabell
Let Kicker's Resolution RMB8 midbass speakers reinforce the low-frequency output of your entire system. If you're building a 4-way system (with bass, midbass, midrange, and high frequencies amplified separately), install these super-slim (2-5/16" deep) midbass speakers in your vehicle's rear deck to add awesome punch to your rear sub. Or, put them in your front doors to lock the bass into the front soundstage get your bump up front where it belongs!
These rugged 8" speakers feature curvilinear injection-molded polygraphite woofer cones and Santoprene rubber surrounds for killer performance. And, if you don't have room in your car for a subwoofer/box combo, the RMB8s have the power handling capability and low-end response to operate as free-air subs.
- curvilinear injection-molded polygraphite cone
- santoprene rubber surround
- blackened one-piece motor structure
- free-air capability
- recommended power range 46-175 watts RMS
- maximum peak power 350 watts
- frequency response 30-500 Hz
- sensitivity 89 dB
- flush-mount depth 2-5/16"
- Recommended Q-Logic Box Type: none
- 1-year warranty
Priced per pair
What's in the Box:
- 2 Mid-bass speakers
- 2 Grilles
- 2 Grille frames
- 8 Speed clips
- 8 Self-tapping screws
- Product Registration card
Features and Specs
|Surround Material||Santoprene rubber|
|Ideal Sealed Box Volume (cubic feet)||N/A|
|Ideal Ported Box Volume (cubic feet)||N/A|
|Port diameter (inches)||N/A|
|Port length (inches)||N/A|
|Dual Voice Coil||No|
89 dB at 1 watt |
|Frequency Response||30 - 500 Hz|
|Max RMS Power Handling||175|
|Peak Power Handling (Watts)||350|
|Top Mount Depth (inches)||2 5/16|
|Bottom Mount Depth (inches)||2 5/8|
|Cutout Diameter or Length (inches)||7 5/16|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
CIMP (Curvilinear Injection-Molded Polygraphite) Woofer Cones: The curvilinear injection-molded polygraphite woofer cones provide smooth, extended low frequency response.
Santoprene Rubber Surrounds: The tough, flexible santoprene rubber surrounds have a long-throw design to control extreme cone excursion.
Kapton Voice Coil Formers: The Kapton voice coil formers in the speakers provide exceptional thermal power handling capability.
Gaskets: One piece front and rear gaskets insure an airtight seal.
Rubber Magnet Boot: A black rubber boot covers the outside edge of each magnet structure to improve the cosmetics of the speakers and protect the magnets during installation.
Nickel-plated Spring Posts: The nickel-plated spring posts will accept bare wire and pin connectors.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.