About the Secura QLF214
Position your TV for optimal viewing with the Secura QLF214 full-motion wall mount. The hinged arm swings out to extend your TV up to 14-1/4" from the wall. The mount can be swiveled from side to side, and tilted up or down. After installation, the mount's "roll" adjustment lets you fine-tune your TV's position to ensure that it's level. And installation is a simple three-step process: Mount the wall plate to a wall stud, attach the brackets to the back of your TV, then lock them into place on the wall plate.
Product highlights:
- designed for TVs 40"-70"
- supports up to 100 lbs.
- pivoting arm extends TV up to 14-1/4" away from the wall
- tilt range: +5° to -15° (may vary with size of TV)
- roll adjustment: +3° to -3°
- swivel range: ±33°
- brackets lock onto wall plate for simple installation
- stud-mounting required
- UL-certified for safe mounting and structural integrity
- 24-15/16"W x 16-1/2"H x 3-1/4"D (up to 14-1/4" with arm extended)
- warranty: 5 years
- MFR # QLF214-B2
What's in the box:
- Wall-plate w/ extension arm
- 2 TV brackets (w/ locking screws)
- Four M6x12mm screws
- Four M6x35mm screws
- Four M8x16mm screws
- Four M8x20mm screws
- Four M8x35mm screws
- Three 5/16"x2-3/4" lag-bolts
- Three 3/4" washers
- Four M6/M8 washers
- Four 22mm spacers
- 3 Concrete anchors
- Hex-key
- Instruction Manual
- Warranty Information
Scratch & Dent items may be missing non-essential accessories. In some cases the manufacturer's accessories have been replaced with generic equivalents.
See the difference between "Open Box" and "Scratch & Dent" Outlet items
Customer reviews for Secura QLF214
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Secura QLF214
Features & specs
Features | ||
---|---|---|
Mount Type | Full-motion | |
Motion | ||
Tilt | No | |
Swivel | No | |
Extend/Retract | No | |
Fixed | No | |
Roll (Level) Adjustment | No | |
Mounting Details | ||
Wood Stud (Single) | No | |
Wood Stud (Dual, 16-inch) | No | |
Wood Stud (Dual, 24-inch) | No | |
Concrete Block-compatible | No | |
Recessed Housing | No | |
Outdoor-rated | No | |
Motorized | No |
Product Research
Features
TV Compatibility: The Secura QLF214-B2 is a full-motion wall-mount bracket for 40"-70" flat-panel TVs up to 100 lbs.
VESA Pattern: The Secura QLF214-B2 features universal mounting brackets to accommodate horizontal hole spacing on back of TVs of 100mm-600mm and a vertical hole spacing of 100mm-400mm. It will accommodate the following VESA hole patterns in accordance with industry standards set by the Video Electronics Standards Association.
- 100 x 100
- 200 x 100
- 200 x 200
- 300 x 200
- 300 x 300
- 400 x 200
- 400 x 300
- 400 x 400
- 600 x 400
M6/M8 Mounting Hardware: The Sanus QLF214-B2 comes with M6 and M8 size bolts of differing lengths to mount the bracket to your TV. Additional hardware may be required for your specific model of TV. For example; shorter or longer screws, thicker or slimmer washers or spacers. These additional accessories can often be found at your local hardware store.
Construction: The Secura QLF214-B2 wall-mount bracket is constructed of heavy-gauge steel with a durable powder-coated black finish. This solid construction provides strength and increased safety.
Full-Motion Design: The QLF214-B2 extends from the wall (3.25"-14.25"), tilts up/down (+5°/-15°), swivels left or right (+/-33°), and rolls (+3°/-3°) for easy viewing anywhere in the room.
Installation Tools: The following tools are recommended for mounting the QLF214-B2:
- Tape measure
- Pencil
- Stud finder
- Level
- Awl
- Drill
- 7/32" Drill bit (for wood stud)
- 3/8" Masonry bit (for concrete block)
- 1/2" Socket wrench
- Phillips-head Screwdriver
- Hammer
Loading...
Loading accessories...
Customer Q&A
1 question already asked
Loading...
Loading articles...
I used it to mount Samsung 65" LED that I bought from Costco several years ago. The instructions were very clear and the installation was easy. What might be a drawback for some is adjusting the tilt on this mount. You need to use an allen wrench, which is included with the hardware.
Michael from Sylmar, CA