Infinity Reference 6022si
6-1/2" shallow 2-way car speakers
For 6-1/2" and 6-3/4" openings
Our take on the Infinity Reference 6022si by Crutchfield's Leigh Schoettinger
Install Infinity Reference 6022si 6-1/2" speakers in your car and change the way you think about long road trips and traffic jams. Reference speakers play your music boldly and cleanly, making your listening time more enjoyable.
Reference speakers feature low impedance so they extract maximum power from any amplifier or car stereo. Infinity makes their Plus One+ woofers 30% larger than other speakers in the same size category. As a result, you'll enjoy deeper bass and higher efficiency for an impressive performance.
The textile dome tweeters feature oversized voice coils that match the tweeters' diameter, a design that provides more surface area for heat dissipation and allows higher power handling. You can adjust the sound to your liking with the tweeter level control.
Infinity makes sure that your installation stays stress-free by including Intermount III, a proprietary mounting system that allows you to install these 6-1/2" speakers in a variety of 6" to 6-3/4" factory locations. You'll also find adapters that fit many domestic and imported cars.
Important Note: These Infinity speakers use a low impedance design to pull more power safely from your car stereo or amplifier. This design is compatible with virtually all factory and aftermarket stereos.
Priced per pair
- 2-way car speakers for 6-1/2" and 6-3/4" locations
- Plus One+ Injection-Molded Polypropylene (IMPP) woofer cone with hi-roll rubber surround
- 3/4" textile edge-driven dome tweeter
- Intermount III mounting system for fit in 6-3/4" openings
- True Four Ohm Impedance technology: speaker's 2-ohm impedance combines with speaker wire impedance for a 4-ohm load
- compatible with virtually all factory or aftermarket car stereos
- shallow mounting profile
- power range: 2-50 watts RMS (150 watts peak power)
- frequency response: 53-21,000 Hz
- sensitivity: 93.4 dB
- top-mount depth: 1-13/16"
- warranty: 1 year
- Our 60-day money-back guarantee
What's in the Box:
- Two 2-way speakers
- 2 Grilles
- 2 Grille frames
- 2 Metal mounting rings
- 2 Plastic mounting rings (Chrysler/GM)
- 8 Machine screws
- 8 Speed clips
- 2 Strips of self-adhesive foam
- Warranty card
Replaced the factory infinity speakers in my new to me Dodge Durango. Previous owner had blown the speakers. Fantastic sound with very good bass! Install was easy for my hubby.
Infinity Reference 6022si Reviews
Average Customer Review(s):
Thanks for submitting your review
Features and Specs
|Tweeter Design||1" Dome|
|Woofer Surround||Hi-roll rubber|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
|Sensitivity (1W at 1 meter)||87.7|
|Sensitivity at 2.83 volts||93.4|
|Frequency Response||53 - 21k Hz|
|Minimum RMS Wattage||2|
|Maximum RMS Wattage||50|
|Peak Power Handling (Watts)||150|
|Top-mount Depth (Inches)||1 13/16|
|Bottom-mount Depth (Inches)||N/A|
|Cutout Diameter or Length (inches)||4 15/16|
Plus One+ Woofer Cones: Each speaker uses a cone significantly larger than other speakers of the same size. This is accomplished by using a unique basket design and hi-roll surround. The Plus One+ design offers greater bass output and a significant increase in efficiency.
Woofer Materials: Each woofer is constructed from Injection-Molded Polypropylene. This process of cone molding assures a uniform cone thickness for superior linearity and clarity. It is also lighter weight and more rigid for decreased distortion and improved bass response.
Hi-roll Rubber Surrounds: The hi-roll rubber surrounds allow the woofers a greater range of movement, resulting in longer X-max and more bass output.
Textile Dome Tweeters: Each speaker uses an edge-driven textile dome tweeter for smooth, accurate highs. A switch on the front of the tweeter housing allows you to boost the tweeter output 3dB, useful if the speakers are mounted low in a door where high frequencies are easily absorbed.
Mounting: Infinity's mounting system allows the 6022si speakers to fit in 6-1/2" and 6-3/4" applications. Metal and plastic adapter rings are included for each speaker.
True Four Ohm Impedance Technology: The speaker's 2.65-ohm impedance combined with the impedance of your speaker wire provides a true 4-ohm load to your connected head unit or amplifier.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.