Yamaha rack mount kit
For MA2030 and PA2030 amplifiers
- optional rack-mounting kit for Yamaha MA2030 and PA2030 amplifiers
- hardware included
- warranty: 1 year
- Our 60-day money-back guarantee
What's in the Box:
- Long (angled) bracket
- 2 Short (angled) brackets
- Joint bracket
- Four M3 x 8mm screws
- Six M4 x 10mm screws (each with one split lock washer and one flat washer)
- Owner's Manual
Overview: The RKH1 Rack Mount Accessory is designed for use with the Yamaha MA2030 or PA2030 Commercial Amplifiers. The RKH1 allows you to rack-mount the amplifier in a standard equipment rack. The amps will fit into a 1U rack space (19" wide x 1.75" high). The hardware to attach the brackets to the amplifier is included. Screws for mounting the device into the equipment rack are not included.
Installation: The MA2030 and PA2030 amplifiers are approximately 8.5" wide, equivalent to the width of a "half-rack." To mount a single amp, two right-angled brackets (one long and one short) are used, positioning the unit to one side of the rack space. The brackets attach to the sides of the amplifier, using the supplied M4x10mm screws, to extend the total width to that of a standard equipment rack (19"). To mount two amplifiers side-by-side, two short right-angled brackets are used. In addition, the included joint bracket attaches to the tops of each amplifier to join the two units together, using the four supplied M3x8mm screws.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.