Pro-Ject Debut Carbon Phono USB (DC)
Manual belt-drive turntable with pre-mounted cartridge and USB output
Item # 252DBDCUSB | MFR # Debut Carbon DC USB
This item is no longer available.
Our take on the Pro-Ject Debut Carbon Phono USB (DC) by Crutchfield's Dave Bar
Bring your record collection into the digital age
The task of transforming your treasured LPs into audiophile-quality digital files requires a great-sounding turntable. That's why the folks at Pro-Ject added a high-fidelity phono preamp with a built-in analog-to-digital converter and USB output to their acclaimed Debut Carbon (DC). This potent playback combination makes it a breeze to transfer music to your computer for easy archiving. Save your tunes as MP3, WAV, or other music files that you can store on your computer or download to your portable player. The built-in preamp means you can also connect the Debut Carbon Phono USB (DC) directly to almost any audio system.
What's new with the Carbon Phono USB (DC)?
The first thing Pro-Ject did was to give the Debut Carbon Phono USB (DC) a new power supply with a precision built-in frequency generator (like their Speed Box) - increasing the turntable's speed stability while decreasing unwanted motor vibration. This extra degree of accuracy and smoothness gives you a more focused stereo image, tighter bass, and greater detail than before. Then, Pro-Ject added new TPE (ThermoPlastic Elastomer) dampers to the motor mounts to better decouple and isolate it from the 'table's chassis, reducing motor noise and rumble to a bare minimum. The result is a turntable that delivers sonic performance rarely found on models in its price range.
Crafted for serious sound
You've probably seen cheap, plastic 'tables equipped with USB, but the Debut Carbon Phono USB (DC) is in a completely different league. Its sturdy MDF chassis rests on shock absorbing rubber feet that provide a solid, low-resonance foundation. Its heavy steel platter spins on a precision axle and bearing for excellent speed stability and smooth, silent rotation. A decoupled motor mount and belt drive system isolates the motor's vibration from the chassis to prevent noise from being transferred to the cartridge. An external AC power supply helps reduce the chance of hum. Finally, the table's one-piece carbon fiber tonearm includes a silicone-damped lift for gently raising and lowering the arm — protecting both the stylus and your records.
Enjoy the rich sound of vinyl without the hassle
Pro-Ject knows that turntable setup can be a challenge for the novice. That's why the Debut Carbon Phono USB (DC) comes out of the box virtually ready to play. Its pre-matched, factory-mounted phono cartridge and tonearm take the guesswork out of installation, so you can enjoy optimized sound quality with minimal effort. A few minutes to dial in key settings like tracking force, anti-skating, and platter speed are all that's needed to experience the best sound you've ever heard from your record collection.
- built-in phono preamp (non-defeatable) with line-level audio and USB output (Windows® and Mac® compatible)
- recording software not included (Pro-Ject recommends Audacity, a free sound recording and editing program available at audacity.sourceforge.net)
- DC power supply with ultra-precision frequency DC-driven AC generator for outstanding speed stability
- upgraded motor suspension with TPE (ThermoPlastic Elastomer) damping for silent operation
- one-piece 8.6" carbon fiber tonearm for superior rigidity and low resonance
- heavy 12" steel platter with felt mat provides excellent speed stability and protects records from scratches
- precision stainless-steel bearing system for smooth, quiet platter rotation
- includes pre-mounted Ortofon OM-10E moving magnet cartridge
- medium density fiberboard (MDF) base with four shock absorbing rubber feet
- AC motor decoupled from base for reduced vibration transmission and better sound
- manual operation with silicone-damped tonearm lift
- 33-1/3 and 45 rpm speeds (manual speed change)
- speed variance: ±0.8%
- wow and flutter: ±0.10%
- signal-to-noise ratio: 68dB
- frequency response (with included cartridge): 20-22,000 Hz
- external power supply reduces likelihood of electro-mechanical interference
- weight: 13.2 lbs.
- 16-3/8"W x 4-11/16"H (with dust cover down) x 13-1/8"D
- warranty: 2 years (1 year warranty for the supplied cartridge)
- Our 60-day money-back guarantee
What's in the Box:
- Turntable (tonearm and cartridge installed)
- AC power supply (w/ attached 6.5' DC cord)
- 3 AC plug adapters (US/UK/EU)
- Metal platter
- Hub (installed)
- Drive belt (installed)
- Felt mat
- 47" Stereo RCA cable (w/ ground wire)
- Female RCA to male 3.5mm adapter
- 6' USB (type-B) to USB (type-A) cable
- 45 RPM adapter
- Anti-skate weight
- Counter weight
- Dust cover
- Plastic hook-tool
- Instructions For Use
- Two-Point Cartridge Alignment Protractor
Fantastic sounds emanating from my man cave since the arrival of my new phonograph player.
Old School, Rochester, MI
Pro-Ject Debut Carbon Phono USB (DC) Reviews
Average Customer Review(s):
Thanks for submitting your review
Features and Specs
|45 RPM Adapter||Yes|
|Signal to Noise Ratio||68|
|Wow and Flutter||0.1|
Integrated Phono-MM Preamp w/ USB Output: Because the Pro-Ject Debut Carbon Phono USB turntable includes a built-in phono preamplifier with USB output, connection to both line-level input of your HiFi system and USB port on your computer can be done simultaneously.
- Built-in Preamp: The built-in phono equalizer preamp allows you to connect the turntable to an integrated amp or receiver that does not have a dedicated phono input. You cannot disable the built-in phono preamp. Plinth mounted RCA output jacks allow for the use of higher quality interconnects for even better sonic performance.
- USB Phono Stage: The Debut Carbon Phono USB turntable allows you to transfer treasured vinyl records to any digital file format on your computer (software not included) with audiophile sound quality via its moving magnet phono preamplifier, A/D converter and USB (type-B) output (USB cable included). Compatible with Windows, Mac, and Linux operating systems. Pro-Ject recommends Audacity, a free sound recording and editing program available at audacity.sourceforge.net.
Resonance-Reducing Construction: The attractive resonance-reducing MDF plinth supports a heavier 12" (300mm) diameter metal platter for smoother rotation and lower wow and flutter. Additionally, a felt record mat is employed for superior record support and coupling. The platter and plinth assembly sits upon four-point "O"-ring feet designed for energy absorption and the plinth-mounted motor is isolated by a new TPE suspension keeping unwanted noise and vibration to a bare minimum. The motor is even decoupled from the plinth to reduce vibration transmission.
Note: The turntable should be positioned on a low-resonance surface such as wood or multiple layer ply-board to avoid structural vibrations disturbing replay.
High-Fidelity Sound: The 8.6" single-piece tube carbon fiber tone-arm that increases stiffness while decreasing unwanted resonances resulting in a higher fidelity presentation of your vinyl recordings. Fitted to the carbon fiber arm is the OM-10E moving magnet (MM) phono cartridge by Ortofon. This arm/cartridge combination is capable of exceptional tracking and recovery of the musical nuance found within the record's grooves.
Belt Driven: The Pro-Ject Debut Carbon features a quiet running AC motor with a two-step pulley which drives the hub and platter via a flat-ground belt. The Debut Carbon supports 33-1/3 and 45 rpm speeds.
Dust Cover: The Pro-Ject Debut Carbon comes supplied with a dust cover to prevent dust build-up on the turntable.
AC Power Adapter: The turntable operates off of standard household current using the supplied external AC power adapter.
- Input: 100-240V~50/60Hz, 0.35A
- Output: 15V - 0.8A (0.5A)
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
Why did you buy this?
I Still Have well over 500 LPs --- most of which I would like to transfer into a digital format. I wanted a Simple Turntable designed for the task (and also good for just listening) and this one seemed to fit the bill. Too often, they are built for One or the Other, but not both. The proof is yet to be seen, but I am optimistic. [ Robert M. Dec 28, 2017 ]
High quality, entry level audiophile turntable, looking to digitize USB and analog outputs. [ Jeffrey Nov 06, 2017 ]
conversation and questions answered by sam a few weeks back and conversation with a friend who bought the same item a few weeks ago [ DAVID Sep 21, 2017 ]
Seems to have options I require at a good price. [ Keith Jun 06, 2017 ]
Great reviews and needed the pre amp. [ Jeffrey Feb 20, 2017 ]
Gift. [ John Dec 22, 2016 ]
Best price I could find. [ Robert Dec 20, 2015 ]
6 questions already asked
This model turntable is not Airplay capable; however, there is a USB output that may work thru a Mac computer. [ Jeffrey Sep 21, 2018 ]
I have used the Pro-Ject Debut built in USB connection to pass turntable output to my Win 10 PC running Audacity audio capture software. In that way I have successfully captured vinyl recordings as digital files in lossless FLAC format in 48K 16 bit format (which is the best the Pro-Ject hardware will do). Presumably this same USB output could be passed to an Apple Airplay compatible device for wireless broadcast to other devices but I've never tried that. The Pro-Ject Debut turntable does not have this capability built in. so you would have to identify the appropriate Apple Airplay compatible device and purchase it separately. [ LEONARD J Jul 17, 2018 ]
The turntable User Manual recommends connecting the ground wire to the amplifier. I have this turntable connected to the AUX input of my amp (the presence of a turntable preamp prevents you from connecting to the PHONO input). I connected the ground wire also. This configuration produces wonderful sound. [ LEONARD J Jul 17, 2018 ]
I Only attached the usb to the computer without the ground attached and it sounded great. [ Gregory g. Dec 23, 2016 ]
I did, though I'm not sure I had to. Everything works fine this way. I haven't tried it without attaching. On my Denon, the ground is called Signal Ground. You can try it both ways, make sure to keep your volume low in case you get some loud hum. See which way sounds best. They may sound identical. In that case, I'd leave it connected. [ Robert Dec 23, 2016 ]
The highest sampling rate for this turntable is 48k Hz @ 16 bits. I have run tests to see how much actual percievable difference there is between this sampling rate and 48K @ 24 bits and 48K @ 96 bits. To be honest, I can't really tell the difference in any reliable, repeatable way. My conclusion from this is that one's perception of recording quality is influenced more by the quality of the original sound engineering (type and placement of microphones, track editing, etc.) than on different sampling rates in the final digital file.. [ LEONARD J Jul 17, 2018 ]
We have not received any answers from other customers on your question. I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They should be able to help answer your question. [ Jeff Jun 19, 2015 ] Staff
do not know [ Michael Jan 17, 2015 ]
Yup. You have to do all that. This is typical of higher end turntables, since the mechanisms needed to automatically manipulate the tonearm add to the cost without adding to the sound quality. Worse, they can introduce vibration which is something you definitely don't want in a turntable. [ LEONARD J Jul 17, 2018 ]
For better or worse, this turntable is, completely manual and has no automatic function. [ JOE Dec 18, 2014 ]
I forwarded your question to an Advisor and they responded with the following: That is actually going to depend on your amplifier. You'll need to make sure that whatever amplifier or receiver you're connecting the turntable into has the ability to bypass the turntables phono preamp. If you would like to discuss further you can contact an Advisor directly by phone (1-800-324-9695) or online chat. [ Krissy Nov 08, 2014 ] Staff