Skip Navigation

Niles VCS HUB8

8-speaker pair connecting block

10 Reviews | 4 questions - 11 answers


Our take on the Niles VCS HUB8

This Niles connecting block lets you easily attach eight pairs of speakers to one set of stereo amplifier outputs. It's perfect for multi-room audio applications where you're installing impedance-matching volume controls in each room.

  • power handling: 600 watts RMS per channel
  • accepts up to 16 gauge wire
  • designed to mount in standard (6" center) structured wiring cabinets
  • slotted wings allow for vertical and horizontal mounting
  • 6-7/8"W x 3"H x 1-1/4"D
  • warranty: 10 years

Great product. Easy to attach speaker wires and no loss of sound from speaker to speaker.

Janice, Newtown Square, PA

What's in the Box:

  • Volume Control Expansion Hub
  • 2 Snap-in "Christmas Tree" plugs
  • 4 Self-adhesive rubber feet
  • Installation & Operation Guide

Niles VCS HUB8 Reviews

Average Customer Review(s):

(10 Reviews)
rewards card
Great Gear Giveaway

Submit a review and enter to win a $350 rewards card

Review this product

Thanks for submitting your review

Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

Your Review

Use the stars below to rate the overall product on a scale of 1-5
Upload your photos

Not visible. Email associated with order.
(e.g., Charlottesville, VA)

Additional Fields (optional)


By submitting this review, you agree to our terms and review guidelines.

Filter by rating

Customer photos

<< >>

Hands-on research

Product Research


Overview: The VCS HUB8 is a speaker distribution hub that mounts in a structured wiring cabinet or on the wall. It connects between the speaker-level output of an amplifier or receiver and the Niles volume controls, allowing you to adjust the sound level of each pair of speakers.

Removable Screwless Speaker Connectors: Two piece, screwless speaker connectors make installation quick and secure. Each connector can accept up to 16-gauge wire. Larger (lower gauge) wire is not recommended, as it will not fit into the connectors. Solid-core, aluminum, or "Romex" wire is not recommended. 

Mounting: The VCS HUB8 is designed specifically to fit into a structured wiring cabinet, with snap-in "Christmas Tree" plugs supplied for convenient installation. The VCS HUB8 can also be mounted to the wall.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Q & A

Customer Q&A

Crutchfield asked  
Why did you buy this?

Electrician told me this was a good one for my AV stuff [ Amy  May 24, 2017 ]
This ties into utilizing sending sound to 8 areas, works seamlessly with Niles Volume controls. Quality. [ Matthew  Apr 11, 2017 ]

4 questions already asked

I forwarded your question to an Advisor and they responded with the following: The hub will connect between the speaker level output of the receiver or amp and connect to a Niles volume control. This Niles item would be a better choice: If you would like to discuss further you can contact an Advisor directly by phone (1-800-324-9695) or online chat. [ Krissy  Aug 24, 2015 ]  Staff
Yes, 16 speakers total. I have mine running to 8 impedance matching volume controls, then out to the speakers. I use this device to consolidate the 8 pairs of home run wiring before going into the amp. [ Richard  Aug 17, 2015 ]
Yes, 16 speakers total. [ Tim  Aug 15, 2015 ]
Yes it does but you have to be careful because you can overload the output of your amp if you try to drive them all at too high a volume [ THOMAS  Aug 15, 2015 ]
Yes if you look closely at the unit you will see that each of the 8 connectors accommodates 4 wires [ Pamela  Aug 15, 2015 ]
The manual for this device says: "With the VCS HUB8, you can distribute the output from your amplifier or receiver to the volume controls for up to eight pairs of stereo speakers." That would be 16 speakers total. [ Richard  Aug 14, 2015 ]
Yes, 16 speakers total. [ CHRIS  Aug 14, 2015 ]
Yes, up to 16 total. I have each leg going to a volume controller which handles two speakers. [ Roger  Aug 14, 2015 ]
Yes, each output is for a pair of speakers, so 16 would be the max. [ Ralph  Aug 14, 2015 ]
Yes 8 pairs so a total of 16 speakers.. [ JAMES A  Aug 14, 2015 ]
I forwarded your question to an Advisor and they responded with the following: Yes, that Niles VCS HUB8 would work with an Onkyo stereo receiver. It would require impedance matching volume controls for each set of speakers, though. If you would like to discuss further you can contact an Advisor directly by phone (1-800-324-9695) or online chat. [ Krissy  Mar 25, 2014 ]  Staff