Stereo integrated amplifier with built-in DAC (Black)
Our take on the Yamaha A-S501 by Crutchfield's David Brown
Power and finesse
Powering your speakers is about more than just brute force. The Yamaha A-S501 offers an excellent balance of power and agility, so your music sounds dynamic and bold without sounding bloated or distorted. In addition to its ample power output, this integrated amplifier employs a symmetrical circuit layout from inputs to outputs, along with an anti-resonance chassis. This keeps distortion and interference from cluttering the signal, for sound that's clean and clear. Your stereo speakers will come to life, for an engaging, detailed performance. Engage Pure Direct listening mode to bypass tone and loudness controls, for an even purer signal.
Connect your TV and Blu-ray player
The A-S501 has six pairs of analog RCA inputs, including a phono input for connecting a turntable. But music sources aren't the only possibilities: optical and coaxial digital audio inputs let you bring video devices into the fold. Connect a TV or Blu-ray player to these inputs, and enjoy movie sound through your stereo speakers with this amp. It's a cost-effective way to build an excellent two-channel rig in your TV room that offers dynamic sound with a wide stereo image.
- 85 watts x 2 channels into 8 ohms (20-20,000 Hz) at 0.019% THD
- 4-ohm capability allows use with a wide range of speakers
- ToP-ART (Total Purity Audio Reproduction Technology) combines a symmetrical circuit layout along with anti-resonance construction for high-quality sound with minimal distortion
- Pure Direct mode allows music signals to travel the shortest possible route through the unit's circuitry for cleaner sound
- optical and coaxial digital audio inputs
- 6 RCA audio inputs, including MM (moving magnet) phono input
- Bluetooth®-ready with optional Yamaha YBA-11 adapter (not included)
- subwoofer output
- two pairs of RCA recording outputs
- signal-to-noise ratio: 99 dB (CD)
- two pairs of gold-plated binding-post speaker connectors with front-panel switching
- 1/4" headphone jack
- remote control
- 17-1/8"W x 6"H x 15-1/4"D
- weight: 22.7 lbs.
- warranty: 2 years
- Our 60-day money-back guarantee
What's in the Box:
- Stereo integrated amplifier
- Remote control (RAS13)
- 2 "AA" batteries
- Owner's manual (En/ Fr)
- Warranty information (US/CA)
- On-line product registration information
- "Yamaha Worldwide Representative Offices" note
great amp! sounds amazing!
Anonymous, Brooklyn, NY
Yamaha A-S501 Reviews
Average Customer Review(s):
Thanks for submitting your review
Features and Specs
|Watts RMS per Channel (8-ohms)||85|
|Watts RMS per Channel (6-ohms)||100|
|Watts RMS per Channel (4-ohms)||Not given|
|Minimum Impedance||4 ohms|
|Signal to Noise Ratio||99|
|Digital Music Features|
|Built-in DAC (Digital to Analog Converter)||Yes|
|High-resolution Audio Playback||No|
|Total Analog Inputs||6|
|Optical Digital Inputs||1|
|Coaxial Digital Inputs||1|
|Dimensions and Warranty|
|Parts Warranty||2 Years|
|Labor Warranty||2 Years|
"Natural Sound" Concept: Yamaha, with a long history of over 125 years as a musical instrument maker, also has a high reputation for HiFi components. Yamaha's A-S501 integrated amplifier takes advantage of this rich experience and high technological expertise. Based on the concept of "Natural Sound", for reproducing all music as it really sounds, and built with scrupulous care from circuit design to basic sound production, the A-S501 reproduces high sound quality and musically rich sound.
Proprietary Yamaha Technologies: The Yamaha AS-501 integrated amplifier employs proprietary Yamaha technologies for optimum performance and sound reproductions.
- ToP-ART Design: When processing and transmission of the audio signal is simple and direct there is less chance of it being affected by noise and distortion. Yamaha's amplifier design technology called "ToP-ART" features an I/O (input to output) Direct Symmetrical Design, with left and right channels organized in a straight, symmetrical layout for highest signal purity.
- ART (Anti-Resonance and Tough): In addition, the ART (Anti-Resonance and Tough) Base bottom chassis and a solid center bar provide high-rigidity support and vibration damping.
High Current Amplifier: The Yamaha A-S501 features a dynamic, high current stereo amplifier with low impedance drive capability. The amp is rated at 85 watts x 2-channels, measured from 20-20 kHz into 8Ω with 0.019% THD (100 watts x 2-channels, measured from 20-20 kHz into 6Ω with 0.038% THD).
High Quality Parts: Custom-made power transformer, custom-made block capacitors, two direct signal path speaker relays, one-point grounding system, aluminum-extruded heat sinks and other top-quality parts effortlessly handle demanding audio signal conditions. The quality of each individual part, as well as how they work together, basically determines the sound quality of any component. Yamaha uses only very high quality parts, carefully selected and tested.
Sophisticated Front-Panel Design: With a beautifully simple and unique design inherited directly from Yamaha's HiFi audio components, this amplifier also boast an easy-to-operate button layout. The aluminum front-panel has a richly textured silver hairline finish. The control knobs are also of the same luxurious construction as used on our top-end models. The rotary encoder makes it quick and easy to select input sources. The luxury hairline finish material offers a nice tactile feeling. LEDs clearly show which source is selected, so you can easily switch sources even in a dark room
Pure Direct Mode: The Pure Direct mode causes the music signals to travel the shortest possible circuit route, bypassing the buffer amp and the tone, loudness and balance controls to virtually eliminate any signal degradation for the purest sound quality.
Variable Loudness Control: The A-S501 also feature a new analog loudness control on the front-panel that uses electronic volume for higher sound quality, which lets you adjust the loudness effect as desired. Separate from the overall volume, this controls the balance of the low- and high- frequency sounds, providing full tonal range at any volume level; compensating for the natural loss in the human ear of high and low frequencies at soft levels.
Tone Controls: The integrated amplifier features independent bass (20 Hz) and treble (20 kHz) controls so you can increase or decrease the low and high frequency response (+/-10dB). You can also adjust the output balance of the left and right speakers.
Impedance Switch: The integrated amplifier features a rear-panel impedance switch to match the impedance level of the speakers connected. Choose High or Low:
- High: Select High if using one set (A or B) of speakers with impedance of 6-ohm or higher; when bi-wiring the impedance of the speaker must also be 6-ohms or higher.
- Low: Select Low if using one set (A or B) of speakers with the impedance of 4-ohm to 6-ohm; if using two sets (A and B) of speakers simultaneously, the impedance of each speaker must be at least 8-ohms; when bi-wiring the impedance of the speaker must also be 4-ohms to 6-ohms.
Simple Remote Control: The clean, simple design of the remote control provides easy-to-understand one-hand operation. The easy-to-use design makes it simple to adjust song volume and order. The remote has a sophisticated looking hairline finish that matches the design of the amplifiers. You can also use the remote to control a Yamaha CD/SACD player.
Auto Power Standby: The amplifier has a power management function that detects when it hasn't been used for a long time (about 8 hours) even though the power is on, and automatically shifts it into standby mode. So even if you forget to turn it off, power consumption will be minimized.
Gold-Plated Terminals: The Yamaha A-S501 has gold-plated terminals for all of its inputs and outputs. These gold-plated terminals ensure a high quality connection that prevents signal loss.
Analog & Digital Inputs: The Yamaha A-S501 integrated amplifier offers analog & digital inputs for connection of a variety of home audio components.
- RCA + Phono: The Yamaha integrated amplifier is equipped with six analog stereo (RCA) inputs for connecting external analog audio sources, including a turntable. The Phono input can be used to connect a turntable with an MM phono cartridge to play vinyl records. The unit's Phono input also features a ground terminal.
- Optical & Coaxial Digital Inputs: The A-S501 is equipped with both optical (toslink) and coaxial (RCA) digital audio inputs. The optical and coaxial inputs will accept 2ch PCM (not Dolby Digital/DTS). The audio stays in the digital domain, giving you pure, pristine dynamic sound for all your entertainment sources, from sports and other programs to movies and concerts.
Recording Outputs: There are also two pair of RCA outputs for recording audio through the amplifier to recording device.
A & B Speaker Terminals: The Yamaha integrated amplifier features binding post terminals for its A & B speaker outputs. You can use the A & B speaker outputs to power two pair of speakers, or bi-wire a single pair of compatible speakers. The terminals are not 5-way binding posts because a plastic collar prevents their use with spade lugs and they are too far apart for dual banana plugs.
Sub Output: A terminal for connecting a subwoofer is provided, allowing you to increase the bass output of your system for a more powerful sound with better overall sound quality
Headphone Output: The A-S501 integrated amplifier is equipped with a front-panel 1/4" headphone output for connecting a pair of headphones (sold separately). The headphone output and speaker outputs will work simultaneously; you will need to rotate the speaker selector switch on the front-panel to the Off position to turn off the sound from your connected speakers.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
Why did you buy this?
Spoke with Troy in service and discussed my needs and current equipment and he felt this would be the best choice for my needs. [ Chris Mar 06, 2018 ]
Good reviews from other audiophiles and the specs don't lie!! Fits my application well. [ Rene Sep 29, 2017 ]
Received help via email with Tyler on A-S301 and decided to upgrade to 501 for increased wattage and gold-plated connectors. [ Tom Sep 02, 2017 ]
Reputation. Fit my needs. [ William M. May 21, 2017 ]
Good product, price, Crutchfield support. [ Tim Apr 19, 2017 ]
Wanted a good integrated amplifier... this has many attributes. Awesome power supply, excellent phono preamp, sub out, digital input for bluetooth and CD. Perfect. [ Sheila Apr 08, 2017 ]
great reviews--Yamaha has never failed me [ NELSON D Mar 08, 2017 ]
After hours/days of research I settled on this amplifier because it has three things that every other amplifier in its price range lacks (or has 2/3 options): 1) Phono input - everyone seems to be getting back into records these days and I am no different. This is a step up from the built-in phono pre-amp on my turn table. 2) Built-in DAC - I purchased this to be my man do-it-all amplifier. 3) Subwoofer out - a rarity in its price range. [ Garrett Feb 01, 2017 ]
Yamaha reputation and the features it provides [ James Sep 03, 2016 ]
Yamaha is a trust worthy brand. [ Daniel J. Aug 16, 2016 ]
I have owned a Yamaha DSP-A1 for nearly 20 years but sadly, is starting to fail. I do not need multi-channel so after weeks of reading reviews and consulting with a couple of engineers who are stereo freaks I settled on the Yamaha 501. Go with what you know! I selected Crutchfield for its reputation and longevity. [ Fred Aug 07, 2016 ]
Best fits my listening requirements at the price I am willing to spend... The help-staff did a great job several moths ago to bring me to this purchase.... Thanks.... Can't wait to plug her in....... [ Steven Jul 21, 2016 ]
My other Yamaha amp just stopped working after 35 years.......I used it all the time. [ Dennis Jul 17, 2016 ]
I have previously owned a Yamaha Integrated amplifier and decided to upgrade. My current amp is over 30 years old. [ Joseph Jun 06, 2016 ]
Great reviews, Yamaha quality and the great specs. [ Gordon Apr 10, 2016 ]
Wanted a pure 2 channel amplifier. Had high reviews. [ Paul Mar 29, 2016 ]
more power, great quality [ Michael Mar 07, 2016 ]
combination of power and features. I like that it accepts digital and analog inputs. [ CARLO Jan 20, 2016 ]
The name brand, lots of five stars reviews. [ TOMY Jan 07, 2016 ]
Ratings [ Garth Dec 04, 2015 ]
clean, good power and DAC [ Mitch Aug 09, 2018 ]
It is a replacement for a Sony 55ES. Chosen because of tech specs (power and THD), sub output, design aesthetics, and overwhelmingly positive reviews. [ Will Aug 04, 2018 ]
Price point with reviews [ Gokhan Jun 18, 2018 ]
gift [ Jacqueline Jun 06, 2018 ]
Because I have an AS801 that I am completely satisfied with. [ Terry Mar 24, 2018 ]
It does everything I need it to do and nothing else. I like simple things. [ James Nov 09, 2017 ]
good value on the amp considering power, thd, and built in dac with optical inputs. also supports two sets of speakers. [ lewis Jul 11, 2017 ]
Features [ Richard Jun 04, 2016 ]
I've owned many Yamaha amps. [ richard May 16, 2016 ]
reviews, reviews and more reviews. Read many and all had nothing but praise for the sound quality. Everything else is a bonus. [ Raphael May 02, 2016 ]
Looking for a high-performance, reasonably priced stereo only integrated amp to replace an older Sony 5.1 receiver. [ Brian Dec 17, 2015 ]
17 questions already asked
2 answers I'm aware this has a dac as I own this device, but if I were to purchase a separate dac(I'm eyeing the Cambridge dacmagic) how would I go about hooking this up? Right now I have my iMac to as501 via toslink. Would I be better off using the dacmagic to Mac and avoiding the as501 all together? [ Mike May 28, 2018 ]
Hi Mike! Got me there Buddy. The only things connected to the Yamaha is a cd player and a old Pioneer turntable but haven't played with the dac yet. Have you asked the guy's from Crutchfield? Can you keep me posted? Sorry... Victor [ VICTOR Jun 09, 2018 ]
Looks to me that you would have to use analog via RCA type connectors. If you wanted to connect using one of the digital cables you need to purchase the dacmagic plus. [ UncleDave7 Jun 06, 2018 ]
I see nothing in the specs that would indicate that the tuner input is any different than the other inputs. There is no mention of a low band filter in the manual so I assume (with 51% confidence) that there is none. The Toslink and coax inputs both accept PCM stereo signals. Any difference between the two would be more a result of the cable you are using. I personally can not tell much difference but then I use consumer-grade cables. The opinion of some reviewers is that the coax is slightly better unless you use a high-quality optical cable - AudioQuest, for example. You can have one device connected to Toslink and another connected to coax and select either from the front panel. Hope this helps. [ Howard May 25, 2018 ]
Not sure if the frequency response are the same, but the tuner, CD, tape deck all sound fantastic. The Toslink and coax digital are two separate cables of I'm not mistaken.....sorry. [ Cyril May 25, 2018 ]
No, it doesn't, the Digital Inputs only support 2ch PCM. [ MARCO A Aug 12, 2016 ]
1 answer i m confused between the Marantz PM6005 and the Yamaha A- S5001 ? both almost the same price category and I already have the Receiver Marantz 1602 so digital inputs not big deal for me here I m planning to connect it to B&W 685S2 bookshelf speaker and connect it through the pure direct to the Marantz Receiver 1602 to benefit from the receiver airplay and other digital inputs , Regards [ Hazem May 19, 2016 ]
Thanks for your interest in the Yamaha A-S501 and Marantz PM6005 integrated amplifiers. While the Q&A portion of our website is great for quick questions about specific product details, you would get a much more detailed comparison of these two models by speaking with one of our expert Advisors. If you would like to discuss further you can contact an Advisor directly by phone (1-800-324-9695) or online chat via the "Contact Us" link at the top of our website. I hope that helps! My Bio: http://www.crutchfield.com/Support/Bio.aspx?bio=159 [ Larry May 22, 2016 ] Staff
I don't have any Bose speakers so, I can't say for sure, However, my advice is to look at the spec.'s on the Bose speakers. Most speakers are 8 Ohm speakers and they may require a minimum amount of power to drive them. For example I have some old AR-3 speakers that were 4 Ohm speakers and required a minimum of 25 Watts per speaker, just to start to drive them. However, it is very hard to find an Amp that will put out the 4 Ohms to drive my speakers. This particular unit has a switch on the back to drive either 4 Ohm, or 8 Ohm speakers, which is what I was looking for. According to the spec's for this unit, this unit will put out 100 Watts per channel @ 4 Ohms, which should be more than enough to drive my speakers. If the Bose speakers are 8 Ohm speakers, which are much more common, see what the minimum spec's are for driving them at 8 Ohms. According to the spec sheet for this unit, this unit will put out at least 85 Watts per channel and I suspect that the Bose speakers requirements will be under that amount, which will be OK, but I am not sure. Check the Bose speaker Spec Sheet to see what the requirements actually are. Another concern would be to note what is the maximum amount of power that the Bose speakers will take. In earlier years, I have blown out some speakers by applying much more power to the speakers than they were designed to take, but fortunately for me the particular speakers that blew were kind of cheap so the lesson wasn't very costly, but I took note for future considerations. Hope this information will help in making your decision. Lot's of luck [ JAMES Aug 04, 2015 ]
I have two sets of Bose speakers powered by this amp & they work fine,. But, my speakers are ancient, so I'm not sure about the new Bose series speakers. [ Donald E. Aug 03, 2015 ]
yes they should work with bose I recommend monster cable for your connection youll love it ren [ michael anthony Aug 02, 2015 ]
Yes, amp is very capable to power almost any speaker; as far as Bose goes since they never mention any of their specs I would say this amp would most likely power them with not even knowing they are there. [ N1K Aug 02, 2015 ]
Yes, it will work fine. [ TOMY Aug 02, 2015 ]
I DON'T HAVE BOSE SPEAKERS BUT THIS AMP WORKS VERY WELL WITH KLIPSCH REFERENCE BOOKSHELF SPEAKERS - PRICED AROUND $350 A PAIR. [ ANDREW Aug 02, 2015 ]
I'm sorry, but I don't think that I can answer your question. I do note that there are 2 sets of RCA Out connections on the back of the unit, but I have no idea if they would as a pre-amp. I assume that each set might be able to be used as a tap monitor loop because of the in and out function, but that was not my reason for purchasing this particular unit. I have a pair of Acoustic Research AR-3 speakers that I purchased back in the middle 50's that were some really great speakers for my purposes and I had a Heathkit Amp that I constructed from a kit in the same time period to drive them. My amp lasted quite a few years, but it had old style fuses to protect the device. The old fuses were no longer made and I would blow the fuses pretty regular. So, recently, a recommended replacement fuse was put in the amp and the amp burned. So much for the amp. My main problem was that the speakers were 4 ohm speakers and very few, if any, companies made a reasonably priced amp that would provide the 4 ohms required to drive the speakers. This unit has the ability to put out the 4 ohms and have more than enough power to drive my speakers and no fuses to buy. The holidays are here now and I haven't had enough time to hook everything up, so I don't know how they will work, however, I suspect that the old speakers just might blow before the new amp does. In any case, I don't have an answer for Mike D's problem and I am hoping that I will be able to relive those wonderful days of my youth, when I finally am able to finally get this unit hooked up and operating and listening to my old AR-3 speakers. [ JAMES Dec 09, 2014 ]
yes [ DOUG Dec 07, 2014 ]
I have my yamaha a-s501 biwired to a pair of klipsch rb-81II large bookshelf speakers used for dedicated turntable set up. More than enough power for these beasts. [ ANDREW J Aug 12, 2017 ]
The Yamaha 501 should not have any problem powering the speakers that you are looking at. The amp can deliver 85 watts into an 8 ohm load and 100 watts per channel into 6 ohm speakers. Your speakers recommend 50-120, so you will be in the sweet end of that range with the 501. My experience with the Yamaha and bookshelf speakers rated at 88 decibel sensitivity is quite powerful and high volume levels at at about a 12 o'clock volume setting. My speaker have a nominal impedance of 8 ohms, your 6 ohm speakers would get a bit more power out of the amp. Hope this helps. [ Arthur Aug 11, 2017 ]
Yes. I am using that amp with 6 ohm speakers rated at 85 db and it sounds great [ R Aug 11, 2017 ]
2 answers Simply, my decision /to buy/ rests soley if 501 would record SONY dual tape deck to record feature, SONY dual CD player/burner ; CD to tape? ; vinyl , to disc, to tape? PURCHASE if can do. YAMAHA serves adequately as the well respected '85 unit of mine needs a break. There is a place in the world for dinosaurs. thanks [ steven Jun 16, 2017 ]
You should be able to record any source that you are listening to onto your tape deck or cd recorder by attaching them to either the line 2 or line 3 inputs and rec outputs as described on page 9 of the owners manual. I have not done this myself yet, but it should be rather straightforward. I definetly do recommend this amp as I am very happy with pure sound quality and ample power that it provides. [ Arthur Jun 16, 2017 ]
Steven, If I'm understanding your questions correctly then yes, the Yamaha S501 amplifier has plenty of input/outputs that should accomodate all of your decks. It's a super clean unit with plenty of power. Thanks [ Paul Jun 16, 2017 ]
thanks for your question. The unit provides 85 watts x 2 channels into 8 ohms (20-20,000 Hz) at 0.019% THD. You can find this information on the main product page under "Product Highlights". Hope this helps. [ Kenny Apr 07, 2017 ] Staff
1 answer 2 PART QUESTION: I recently purchased and I am REALLY enjoying a pair of Elac F7 tower speakers that I purchased from Crutchfield. Have any of you Crutchfield team members "heard" that combination of this Yamaha AS501 integrated and the Elac F7 speakers? Also, will this Yamaha AS501 likely sound noticeably "better" than my 6 year old Harmon Kardon 3490 receiver, which you also sold? I am simply looking for an upgrade of basic sound quality. Thanks [ E Feb 05, 2017 ]
Generally, an integrated amplifier will sound much better than a receiver. however, I had a HK Blu-ray/ tuner /amp a BD model I think all built in along side this exact Yamaha. While the HK was good, the Yamaha was an over all more detailed and better amp.My suggestion is why don't you purchase the integrated and try it in your own environment that way you be the judge. If you are not satisfied crutchfied has an excellent return policy. But I strongly think you are going to like the Yamaha. Good luck. [ Alexis Feb 06, 2017 ]
Thanks for your question. For information on comparing two or more models I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences and help you make the best choice for your system and your budget. [ Kenny Dec 12, 2016 ] Staff
Yes, the 501 has a built-in preamp, but if your TT has it's own preamp just connect through Line 1, 2,or 3. I never tried two preamps, but I'm sure it would cause considerable sound distortion. [ John May 09, 2016 ]
All answers were very helpful and I wold like to thank all. [ Edward May 07, 2016 ]
Ed i have a non-preamp numark going through my 501. naturally the volume is much lower than my tascam cdrw and kenwood tape deck ( which have 5 and 3 watts of power.) i can only imagine your turn table's extra power will ad to total quality. JON [ jon May 07, 2016 ]
Edward you don't want to go through two (2) pre-amps. If you cannot by-pass your built-in pre-amp on your turntable, then you want to connect to either the 'Tuner' input or 'Line 1' input on the back of the device. The turntable pre-amp that is included with this Yamaha integrated amp is fine though limited to MM (moving magnet), not MC (moving coil). This is a very good sounding IA but give it some time. I did not like it at first, but after two weeks of running it (burn in) it sounded great! It also has plenty of power! Kevin [ Kevin May 06, 2016 ]
I would connect the turntable to one of the line inputs, since it has already been preamplified. I would NOT connect to the phono input, as I would expect real distortion from two gain stages. I come from the OLD NAD 2030 background (absolutely loved it), and am very happy with this Yamaha. [ GARY K May 06, 2016 ]
I would not amplify it twice. Since your phone has a preamp already I would just connect it to a line in. [ N1K May 06, 2016 ]
Don't know for sure but two preamps in series sounds a little scary. Would output from first preamp be outside or overload amp input limit? Great, l answered question with a question! Love this integrated amp!!!! [ Eugene May 06, 2016 ]
I haven't used it so I don't know, but in the past you need an output, not an input into another device that can "record" the incoming signal. There is no device on or no media to insert the unit. So only if you can use an output digital or analog on the unit will you succeed, in my opinion. [ LARRY Oct 19, 2015 ]
David I have this amp and I don't know of any connection for Spotify or any other internet based music stream. [ Joseph Jun 04, 2015 ]
Not to my knowledge. However if you have spot iffy on an iPad, iPhone etc you can use the app and run it through the amp using AirPlay. [ LARRY Jun 03, 2015 ]
no online connection on this device [ MPW Jun 03, 2015 ]
The A-S501 has no Internet connected services. It's purely a stereo amplifier that will power speakers and take various analogue and digital inputs. I use mine with an Apple TV connected via optical input and play Spotify through the Apple TV. Works great! [ Samuel Jun 03, 2015 ]
No, it does not. [ N1K Jun 03, 2015 ]
Not that I find but it is Bluetooth ready. I purchased the Yamaha YBA-11 adapter and it works great with Android phone and IPad. So, I would think you could play through Spotify that way [ Eugene Jun 03, 2015 ]
Sorry, I don't have an answer for you. I don't know the ohm or power requirements of your speakers or how many you are powering. [ Donald E. Mar 01, 2015 ]
I can not answer your question....ask the crutchfield rep [ RONALD P Feb 25, 2015 ]
I have klipsch horns if you know what they r it drives them excellent!!!! [ DOUG Feb 24, 2015 ]
I have klipsch horns if you know what they r it drives them excellent!!!! [ DOUG Feb 24, 2015 ]
I'm sorry, but I don't know anything about Klipsch RF-8211 speakers [ JAMES Feb 24, 2015 ]
Hi Leigh I'm not sure. I have Bose 301's hooked up to it. Stuart [ Stuart Feb 24, 2015 ]
Leigh I have this amp driving a pair of Bose 301's. I am pleased with the sound I'm getting. Not sure where your speakers compare to mine but hopefully you can gauge the probability based on my speaker source? [ Joseph Feb 24, 2015 ]
Very eas easily. I have a pair of rf-82s and it sounds wonderful through this amp. The 82s are very efficient at 98 db per watt. My back up amp is only rated at 10 watts and the 82's scream. [ N1K Feb 24, 2015 ]
I asked Yamaha repair techs this question and was told that even though it isn't listed in the manual, the sub out filters out anything above 90Hz. [ Christopher Mar 12, 2016 ]
I forwarded your question to an Advisor and they responded with the following: There is not a separate subwoofer crossover on the amplifier. You would need to adjust and control this from the subwoofer itself. The bass control affects the speakers and subwoofer and it is set at 400 Hz. If you would like to discuss further you can contact an Advisor directly by phone (1-800-324-9695) or online chat. [ Krissy Jan 07, 2015 ] Staff
The knobs are plastic. If you use the remote, this may not matter as much. [ Donald E. Dec 29, 2014 ]
Thank you for replying to my question.Some people say plastic and some say metal.I guess I will have to take a chance to be sure.If it doesn't then I will return it.Thanks again. [ leigh Dec 26, 2014 ]
Metal [ Stuart Dec 26, 2014 ]
Plastic. Unfortunately makes a high quality device feel less so. But don't let the cheap knobs overly influence your purchase. It's performance is excellent, so far, with tuner, CD, cassette deck (still holding on to the past), and Bluetooth inputs. [ Eugene Dec 26, 2014 ]
Looking for more? Check out the next model in this lineup.
Frequently Compared With
Stereo integrated amplifier with built-in DAC
Stereo integrated amplifier with built-in DAC
Stereo integrated amplifier with built-in DAC
Stereo integrated amplifier with built-in DAC