About the Pro-Ject RPM 1 Carbon
Great looks and even better sound
Great looks and even better sound
The RPM 1 Carbon's striking looks are just the beginning of this turntable's appeal. Pro-Ject follows through with a healthy dose of top-notch sound quality. Their minimalist design philosophy focuses on the features that benefit sonic performance — no unnecessary bells and whistles here. With its simple, elegant appearance and handsome high-gloss finish, this table will look and sound fantastic perched on your audio rack.
Profile view of the Pro-Ject RPM 1 Carbon in Black Gloss.
Features that focus on performance
A look under the platter reveals the RPM 1 Carbon's unusual three-point low-resonance MDF chassis. This triangular-shaped design helps resist vibrations that can smear sonic detail. The RPM 1 Carbon's heavy MDF platter spins on an inverted bearing with a ceramic ball for smooth, silent rotation. The motor is driven by an ultra-precise AC generator with a DC power supply for enhanced speed stability. The isolated motor assembly and belt drive system keep motor vibration away from the chassis, preventing noise from being transferred to the cartridge.
The table's S-shaped tonearm is made from carbon fiber, aluminum, and resin for maximum rigidity and internal damping that minimize resonance. An offset, TPE-damped counterweight design lowers the arms center of gravity to improve tracking — a big help with warped records. And the RPM 1 Carbon comes outfitted with an easy-to-use magnetic anti-skating mechanism for faster setup.
Product highlights:
- 12" resonance-optimized medium density fiberboard (MDF) platter with felt mat
- precision inverted bearing with ceramic ball for smooth platter rotation, greater speed accuracy, and low wow-and-flutter
- one-piece S-shaped tonearm made from carbon, aluminum, and resin for better rigidity and internal vibration damping
- includes pre-mounted Sumiko Pearl moving magnet cartridge
- frequency response 12-30,000 Hz
- tonearm offers easy adjustment of vertical tracking angle and azimuth for optimized playback performance and cartridge-matching
- medium density fiberboard (MDF) plinth with three nylon cone feet
- 15-volt AC motor driven with ultra-precise AC generator and DC power supply
- magnetic anti-skating for easy setup and more precise tracking
- isolated motor assembly optimized for low noise and speed stability
- manual operation with silicone-damped tonearm lift
- 33-1/3 and 45 rpm speeds with manual speed change
- speed drift: ±0.27% at 33 RPM, ±0.19% at 45 RPM
- wow and flutter: ±0.14% at 33 RPM, ±0.13% at 45 RPM
- signal-to-noise ratio: 71 dB
- detachable RCA audio cable included
- tracking force gauge included
- external power supply reduces likelihood of electro-mechanical interference
- dust cover not included
- weight: 7.3 lbs.
- 14-15/16"W x 4-7/8"H x 13-1/2"D
- warranty: 2 years (1 year warranty for the supplied cartridge)
- requires a phono preamp or phono input on receiver or preamplifier
- MFR # RPM 1 Carbon-GB
What's in the box:
Pro-Ject RPM 1 Carbon owner's manual
- Turntable (tonearm & cartridge installed)
- Platter
- Motor
- AC power supply (attached 6' DC cord)
- 3 AC plug adapters (US/EU/UK)
- Drive belt
- Felt mat
- 47" RCA stereo cable (with ground wire)
- 45 RPM adapter
- Counterweight
- 3 Protective discs
- 2 Hex-keys
- Stylus Pressure Gauge
- Two-Point Cartridge Alignment Protractor
- Instructions For Use booklet
- Warranty Information
Customer reviews for Pro-Ject RPM 1 Carbon
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Pro-Ject RPM 1 Carbon
Features & specs
Features | ||
---|---|---|
Color | Not given | |
Operation | Manual | |
Speeds | 33-1/3, 45 | |
Speed Control | --- | |
Drive Type | Belt | |
Pitch Control | No | |
Phono Preamp | No | |
USB Output | No | |
Bluetooth Built-In | No | |
45 RPM Adapter | Yes | |
Audio Cable | Detachable | |
Power Cable | --- | |
Materials and Construction | ||
Plinth | --- | |
Platter | --- | |
Tone Arm Shape | S-shape | |
Tone Arm Material | --- | |
Tone Arm Lift | Finger, lever | |
Cartridge Info | ||
Included Cartridge | Sumiko Pearl | |
Cartridge Type | MM | |
Removable Headshell | No | |
Tracking Weight | 2.0 grams/20mN | |
Frequency Response | 20-20000 | |
Output Voltage | --- | |
Load Impedance | --- | |
Load Capacitance | --- | |
Audio Specs | ||
Signal to Noise Ratio | 71 | |
Wow and Flutter | 0.14 | |
Dimensions and Warranty | ||
Width (Inches) | 15.6875 | |
Height (Inches) | 4.8125 | |
Depth (Inches) | 15.5625 | |
Weight | 8.3 lbs. | |
Turntable Parts Warranty | 2 Years | |
Turntable Labor Warranty | 2 Years | |
Cartridge Parts Warranty | 1 Year | |
Cartridge Labor Warranty | 1 Year |
Product Research
Features
Precision Belt-Drive Using Synchronous Motor: The Pro-Ject RPM 1 Carbon features a precision belt-drive system using a quiet running synchronous motor. It supports both 33-1/3 and 45 rpm speeds.
MDF Construction w/ Inverted Bearing Assembly The Pro-Ject RPM 1 Carbon features three-point MDF (medium density fiber) plinth for exceptional stability. The low resonance chassis holds a newly designed inverted platter bearing with ceramic ball for further reduced rumble. The platter is made from 300mm MDF and features a felt mat.
S-Shaped Tonearm w/ Sumiko Pearl MM Cartridge: A completely new designed S-shaped tonearm tube is made from carbon fiber, aluminum and resin. Using a complex 3-step process with heat treatment and 100bar pressure, arm tube rigidity is strengthened, internal damping is maximized and resonances are reduced to a minimum. Fitted to the tonearm is a Sumiko Pearl MM cartridge for exceptional sound quality reproduction.
Tracking Features: Additional features are a new magnetic antiskating mechanism and a TPE-damped counterweight for improved tracking.
Stereo RCA Output w/ Grounding Screw: Connection to the phono input of your amplifier can be made with connecting cables of your choice through the turntable's gold-plated stereo RCA phono jacks and grounding screw. The Pro-Ject turntable comes supplied with a 47" stereo RCA cable with ground wire.
Note: If your receiver does not have a suitable Phono MM input, a separate phono pre-amplifier (sold separately) is required to connect the turntable to your amplifier.
Outboard Power Supply: An outboard 15V AC motor is smoothly driven using an ultra-precision AC generator with DC power supply for further enhanced speed stability.
No Dust Cover: This turntable does not come with a dust cover.
Loading...
Loading accessories...
Customer Q&A
2 questions already asked
Loading...
Loading articles...
Best turntable I've ever owned. kinda cool looking, creative isolation of the motor reduces vibrational difficulties
Kevin from Arlington Hts, IL