SoundCast™ iCast Transmitter
Enjoy music from your 30-pin iPod® or iPhone® throughout your home
Item # 751ICT111A | MFR # ICT111A
This item is no longer available.
Our take on the SoundCast™ iCast Transmitter by Crutchfield's Ralph Graves
SoundCast systems let you create a simple and easy-to-use wireless multi-room audio system in your home. The iCast transmitter features a built-in 30-pin dock connector for your older iPod or iPhone, and it sends music from your player to OutCast or OutCast Junior wireless speakers (sold seperately) in different rooms. You can send signals to two speakers in different rooms simultaneously and control music playback remotely via the iCast receiver.
The iCast Transmitter automatically syncs with your SoundCast system, making setup simple. It runs on a proprietary wireless network that features a range of 350 feet or more indoors.
- compatible with 30-pin docking iPods and iPhone, iPhone 3G, and iPhone 3GS
- sends music wirelessly to iCast receivers and speaker systems (sold separately)
- three separate channel selections for setting up multiple systems in a single house
- minijack audio input for connecting an external source
- minijack headphone output
- automatically charges docked player
- includes AC adapter and connecting cables
- 6-7/8"W x 2-1/16"H x 4"D
- warranty: 1 year
- Our 60-day money-back guarantee
What's in the Box:
- iCast Transmitter
- AC power adapter (with attached 6' DC cord)
- 6.5' Minijack cable
- 6.5' Minijack-to-stereo RCA cable
- Owner's Manual
- "RF Power Saving Mode" note
FHSS (Frequency Hopping Spread Spectrum) Technology: The SoundCast iCast System is an interference free, wireless 2.4 GHz system. The SoundCast system uses frequency hopping spread spectrum (FHSS) technology in which the SoundCast iCast transmitter constantly and automatically searches for open channels in the 2.4GHz band and jumps to them to avoid interference with other products (such as cordless telephones, radio controlled toys, cell phones, microwave ovens, remotes, and wireless routers), while telling the SoundCast iCast receiver which frequency to use, and ultimately sending your music wirelessly to your connected home stereo or powered speakers.
iCast Transmitter: The iCast Transmitter features an integrated iPod dock and a 3.5mm jack, which can be used as either an auxiliary input or headphone output. The iCast Transmitter allows you to wirelessly transmit audio from your docked iPod or connected audio device to a SoundCast iCast Receiver (sold separately).
Wireless Range: The SoundCast iCast system has a wireless range of 150' from the iCast Transmitter to the iCast Receiver. Outdoors, the wireless signal may carry up to 350' depending on conditions.
Note: The iCast system is not weather-resistant and not designed to be placed outdoors.
iPod/iPhone Dock: The iCast Transmitter features a top-mounted 30-pin iPod/iPhone dock for wireless audio streaming to your iCast Receiver. The iCast Transmitter will also charge your iPod or iPhone while docked. Once linked to your iCast Receiver, the receiver will control basic controls of your iPod/iPhone (it does not offer iPod/iPhone text display).
Note: Supported iPod models - iPod clickwheel (3rd gen), iPod photo (4th gen), iPod video (5th gen), iPod mini (1st/2nd gen), iPod nano (1st/2nd/3rd/4th/5th gen), iPod classic (80/120/160GB), iPod touch (1st/2nd/3rd/4th gen), and iPhone (2G/3G/3GS/4/4S).
Auxiliary Input: There is a 3.5mm jack on the rear-panel of the transmitter which can be used as an auxiliary input for connecting your computer other audio device.
Headphone Output: If you wish, you can connect the iCast Transmitter to a set of headphones for private listening, using the 3.5mm jack on the rear-panel of the unit.
Note: The volume control on the iPod does not function while in the dock, so you can only adjust the volume if the headphones speakers permit it.
Multi-Room Compatible: The iCast Transmitter can operate up to two iCast receivers. This means you can transmit audio to two different locations in your home (same source will be heard in each room). It is also possible to operate three entirely different iCast systems in the same house.
Note: You will need to make sure the channel selector switch (1-3) on the back of the iCast Transmitter and the iCast receiver are set to the same frequency within the same system.
RF Power Saving Mode: Soundcast's iCast Transmitter has a Power Saving Mode. The iCast transmitter will enter into a state where the RF power used by the iCast transmitter will be minimized whenever it does not detect an RF link with the iCast receiver. This RF power saving mode will be engaged if a SoundCast receiver it not in range or powered on within 30 seconds.
Power Supply: The iCast transmitter operate off of standard household AC current using the supplied AC power adapter.
|Data Rate||1.536 Mbps|
|Modulation||Frequency Hopping; FSK digital radio|
|Transmission Type||Transceiver (Bi-directional)|
|Co-existence||Impervious to 802.11, microwave oven, both DSSS and FHSS cordless phones, and Bluetooth devices. Up to 3 SoundCast system can operate in 1 general area.|
|Operating Frequency||2400-2483 MHz|
|Channel Width||2.0 MHz|
|THD+N||0.07% @ 1kHz|
|SNR||92.4 dB A-weighted (20-20 kHz)|
|Frequency Range||20-20 kHz (+/-1dB)|
|Typical Range||150' indoors/350' outdoors|
|Transmitter Power||19 dBm (FCC & ETSI compliant)|
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.