Skip Navigation

Klipsch Reference Premiere RP-280FA

Dolby Atmos® enabled floor-standing speaker (Black wood veneer)

26 Reviews | 12 questions - 59 answers

California customers: Please click here for your Proposition 65 warning.
Top Seller

Item # 714RP280AB

In Stock

 Ships FREE

Was: $1,199.99

Special Purchase: -$400.00

Add to Cart

Ask an expert

Our VA-based experts can help.

1.844.293.6064

Chat Call Me Email

Overview

Our take on the Klipsch Reference Premiere RP-280FA

Take your home theater experience higher with the Klipsch Reference RP-280FA floor-standing speaker and Dolby Atmos surround sound. This Atmos enabled tower is ready to deliver a new and more thrilling home theater experience with Dolby Atmos soundtracks. Not familiar with Dolby Atmos? This new home theater technology creates a "height" layer above your listening area for more immersive and realistic surround sound. And the RP-280FA looks as fantastic as it sounds. A gorgeous real wood veneer finish makes this tower an ideal cosmetic match to the Klipsch RP-450CA center channel speaker, and an attractive addition to any home theater.

Fantastic Klipsch sound raised to the power of Dolby Atmos

Take your home theater experience higher with the Klipsch Reference RP-280FA floor-standing speaker and Dolby Atmos surround sound. This Atmos enabled tower is ready to deliver a new and more thrilling home theater experience with Dolby Atmos soundtracks. Not familiar with Dolby Atmos? This new home theater technology creates a "height" layer above your listening area for more immersive and realistic surround sound. And the RP-280FA looks as fantastic as it sounds. A gorgeous real wood veneer finish makes this tower an ideal cosmetic match to the Klipsch RP-450CA center channel speaker, and an attractive addition to any home theater.

Klipsch RP-280FA tower speaker

The RP-280FA's top-firing drivers deliver stunning height channel effects for Dolby Atmos soundtracks. (Pictured in walnut finish.)

Bounce sound off the ceiling for enhanced surround effects

How does this speaker work? Along with their forward-firing, dual 8" woofers and signature Klipsch horn tweeter, each RP-280FA boasts an upward-firing driver array built into the top of the enclosure. These drivers are angled and feature controlled dispersion, so they can reflect sound off of your ceiling and back down to your listening positions. And by using voice-matched drivers for both the top and front positions, the RP-280FA creates an exceptionally seamless, multi-dimensional space that puts you inside the action.

The Reference Premiere Series difference

The new Reference Premiere Series builds on the acoustics and technologies of Klipsch's classic Reference Series, with important enhancements that provide an even more intense listening experience.

Hybrid horn technology for dynamic performance

Klipsch's newly designed Hybrid Tractrix® horn features a circular throat around an advanced titanium diaphragm tweeter that transitions into a square 90º x 90º mouth. This unique shape provides a cleaner, more efficient transition of sound waves into your listening space, for a wider sweet spot with more precise placement of instruments and vocals. Even the horn material itself has been upgraded to molded silicone rubber that helps decrease resonance for smoother, warmer highs.

A horn that can enhance bass, too

This Reference Premiere speaker also uses a Tractrix horn-shaped port for smoother, more efficient airflow in and out of the cabinet. The resulting decrease in air turbulence makes for cleaner, more powerful bass with reduced port noise and low-frequency distortion.  

High-tech woofer design

The RP-280FA's Cerametallic™ woofers use a newly developed titanium voice coil former that allows more linear movement for enhanced efficiency, lower distortion, and extended low frequency response. 

Build a complete Klipsch system

Team a pair of RP-280FA tower speakers with these other Klipsch Reference Premiere Series speakers to create a high-impact Atmos home theater system.

Recommended center channel speakers: Klipsch RP-450CA
Recommended surround speakers: Klipsch RP-140SA
Recommended subwoofers: Klipsch R-112SW, Klipsch R-115SW

Got wire?

Most speakers don't include any. Read our article about choosing and installing speaker wire.
Shop our selection of speaker wire.

Product Highlights:

    Main Channel Specifications:
      • frequency response: 32-25,000 Hz (±3dB)
      • impedance: 8 ohms compatible
      • sensitivity: 98 dB
      • power handling: up to 150 watts RMS (600 watts peak)
      • 90° x 90° Hybrid Cross-Section Tractrix® horn with 1" LTS (Linear Travel Suspension) titanium diaphragm tweeter
      • two 8" Cerametallic™ cone woofers with rigid titanium voice coil formers
      • bass-reflex (ported) cabinet design
      • rear-firing Tractrix port provides fast, efficient airflow from the cabinet for clear, powerful bass
      • dual binding post speaker terminals for bi-amping or bi-wiring
    Height Channel Specifications:
      • frequency response: conforms to Dolby Atmos specification
      • sensitivity: conforms to Dolby Atmos specification
      • power handling: up to 75 watts RMS (300 watts peak)
      • 90° x 90° Hybrid Cross-Section Tractrix® horn with 1" LTS titanium diaphragm tweeter
      • 6-1/2" Cerametallic™ cone woofer
      • acoustic suspension (sealed) cabinet design
      • single binding post speaker terminals
    • magnetically attached front grille for a clean, streamlined look
    • real wood veneer finish
    • built-in MDF (Medium Density Fiberboard) base for increased speaker stability
    • 10-1/2"W x 43"H x 19"D
    • weight: 71.75 lbs.
    • warranty: 5 years
    • Our 60-day money-back guarantee

    What's in the Box:

    • Floor-standing loudspeaker (Ebony)
    • Grille (attached)
    • 4 Spiked feet
    • 6 Rubber feet
    • Important Safety Instructions
    • Warranty Information

    Awesome customer service, quick delivery and a great set of speakers. Thanks!

    Kelly, Grand Island, NY

    Reviews

    Klipsch Reference Premiere RP-280FA Reviews

    Average Customer Review(s):

    (26 Reviews)
    rewards card
    Great Gear Giveaway

    Submit a review and enter to win a $350 rewards card

    Review this product

    Thanks for submitting your review

    Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

    Your Review

    Use the stars below to rate the overall product on a scale of 1-5
    1500
    Upload your photos

    Not visible. Email associated with order.
    (e.g., Charlottesville, VA)

    Additional Fields (optional)

    500
    500

    By submitting this review, you agree to our terms and review guidelines.

    Filter by rating

    Customer photos


    << >>
    Details

    Hands-on research

    Features and Specs

    General
    Enclosure Bass Reflex
    Finish MDF/Wood Veneer
    Color Ebony
    Tweeter Tractrix Horn
    Tweeter Size (inches) 1
    Midrange Size (inches) N/A
    Woofer Size (inches) 8
    Woofer Composition Cerametallic
    Woofer Surround Rubber
    Built-in Powered Sub No
    Video-Shielded No
    Connector Type Binding post
    Bi-amp Inputs Yes
    Parts Warranty 5 Years
    Labor Warranty 5 Years
    Specifications
    Power Range 150
    Frequency Response 32-25k Hz
    Sensitivity 98 dB
    Impedance (Ohms) 8
    Subwoofer Amp Power ---
    Height (inches) 43-1/16
    Width (inches) 10-9/16
    Depth (inches) 19-1/8
    Weight 71.75 lbs

    Product Research

    Features

    Dolby Atmos Enabled Floor-Standing Speaker: The Klipsch RP-280FA is built upon the same technology and power as Klipsch's RP-280F floor-standing speaker, but with an elevation channel integrated into the top of the speaker to reflect sound off the ceiling to deliver the overhead Dolby Atmos experience.

    • Main Channel: The Klipsch RP-280FA's main channel consists of a 1" titanium dome LTS tweeter with hybrid Tractrix Horn and dual 8" Cerametallic cone woofers in a bass reflex enclosure. The main channel can handle up to 150 watts of continuous power and 600 watts of peak power. The main channel connects to your AV receiver's main front speaker outputs.
    • Height Channel (for Dolby Atmos): The floor-standing speaker's height channel consists of a 1" titanium dome LTS tweeter with hybrid Tractrix Horn and one 6.5" Cerametallic cone woofer in a sealed enclosure. The height channel can handle up to 75 watts of continuous power and 300 watts of peak power. The height channel connects to your AV receiver's Dolby Atmos effect speaker outputs.

    90° x 90° Hybrid Tractrix Horns: A redesigned Tractrix Horn utilizes a circular horn throat paired to a square horn mouth to further improve high-frequency response and extension, while enhancing imaging and dynamics. The compressed molded rubber construction adds high frequency damping to reduce harshness and improve detail. This creates the cleanest, most natural sound possible. These 90° x 90° Hybrid Tractrix Horns provide a wider sweet spot while maintaining controlled directivity of the sound.

    LTS Tweeters: Behind the Tractrix Horn lies a 1" titanium tweeter with a linear travel suspension for open, natural, sound. The Linear Travel Suspension minimizes distortion for enhanced, detailed performance.

    Cerametallic Woofers: The woofers of the RP-280FA floor-standing loudspeaker features Klipsch's distinctive, copper-colored Cerametallic material. Made with an anodized aluminum, this cone is strong and dent resistant. The anodizing process converts its inner and outer surfaces to ceramic. The outcome is a rigid cone with superb damping characteristics that will not flex or resonate at frequencies within the woofer's operating range The woofers also employ a rubber surround for added durability.

    Crossover Network: The Klipsch RP-280FA floor-standing speaker's crossover network is constructed using extremely high-quality components including top-of-the-line internal wiring, polyester film-type capacitors and an air-core inductor to ensure signal purity and proper driver integration. The speaker's enhanced crossover frequencies (1750Hz/2000Hz) offer smoother on-axis and off-axis integration.

    Bass Reflex MDF Enclosure: The Klipsch RP-280FA employs a bass reflex enclosure with a rear-firing Tractrix port for greater efficiency and bigger bass response. Utilizing Tractrix geometry, the all new Reference Premiere bass port allows for the most efficient, fastest air transfer from the cabinet  for a clean, powerful low frequency response. The speaker's rigid cabinet offers improved internal cross-bracing to minimize panel vibrations that can color sound.

    • MDF Plinth: The all new satin painted MDF plinth footers of the Klipsch Reference Premiere series floor-standing speakers lend an acoustically sound, authoritative stance when placing the speakers on your wood, tile, or carpeted floors.
    • Magnetic Grille: The floor-standing loudspeaker features a removable magnetic low-diffraction grille which easily snaps into place over its polymer front baffle.

    Binding Post Terminals: The floor-standing speaker offers dual binding post terminals for the main channel and single binding post terminals for the height channel. The main channel's two sets of binding posts are connected by jumpers. Using the dual binding posts, you can bi-amp or bi-wire the main channel of the speakers. The binding post terminals will accept banana plugs (single only), pin-connectors, spade-connectors, and bare wire.

    Note: The speaker's main channel binding posts will need to be connected to your AV receiver's main front speaker outputs, while the speaker's height channel binding posts must be connected to your AV receiver's Dolby Atmos effects speaker outputs.

    Rubber or Spike Feet: The floor-standing speaker comes with rubber and spike feet. The included rubber feet offer safe placement of the speaker on your tile or hardwood floors. The included optional spikes are intended to increase stability on carpeted floors; spikes are not recommended for hard surfaces. The rubber feet simply stick to the bottom of the speaker's MDF plinth, while the spikes screw into the bottom of the speaker's MDF plinth.

    • The rubber feet add approximately 0.125" of height to the speaker.
    • The spike feet add approximately 0.875" of height to the speaker.

    Placement: The Reference Premiere series floor-standing loudspeakers are designed to perform well in a wide variety of locations but you will get the most out of the speakers by following these simple guidelines.

    • For optimum performance, Klipsch suggests placing the speakers 6'-15'apart. They may also be toed-in slightly for better stereo imaging. The listening position should be approximately 1-1.5x the distance separating the speakers.
    • The floor-standing loudspeakers should be equal distance from the floor and the wall behind them. It can also help to have the left and right speakers at different distances from their nearest side walls. This sort of staggering helps smooth the bass range.
    • The speaker requires a few inches of clearance behind it to allow its port to breathe and will sound best when they are at least two feet from any nearby walls.

    Our Product Research Team

    At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

    Accessories
    Q & A

    Customer Q&A

    Crutchfield asked  
    Why did you buy this?

    Great price and I already have other Klipsch RP speakers in my HT room. [ kevin  Jul 03, 2018 ]
    Excellent reviews and goes with my other Klipsch speakers [ Daniel  Jan 06, 2018 ]
    The price is right and it compliments the Klipsch Reference RC62 II center channel I recently purchased. [ Michael A  Dec 27, 2017 ]
    Love that Dolby Atmos sound [ Darren  Dec 20, 2017 ]
    Atmos capabilities [ Jesus  Dec 11, 2017 ]
    I purchased a pair of surround from Klipsch and was most impressed. Then you offered a significant price reduction. [ John  Nov 10, 2017 ]
    Looks, quality, reviews, Atmos. [ R  Oct 08, 2017 ]
    Love the Klipsch brand. wanted dolby atmos without putting in ceiling speakers. [ JERALD  Jun 30, 2017 ]
    I do not believe there is a better speaker than Klipsch. Crutchfield's sale price was awesome. I will be back when the next sale of Klipsch speakers is brought to my attention. [ David  Apr 15, 2017 ]
    I LOVE KLIPSCH SPEAKERS [ Quentin  Apr 06, 2017 ]
    Sound quality and excellent reviews [ Jim  Mar 21, 2017 ]
    Upgrade to Dolby Atmos [ Jimmy  Mar 12, 2017 ]
    Atmos enabled for my home theather [ Joseph  Feb 23, 2017 ]
    The Dolby Atmos speaker combination was appealing - I liked not having a separate Atmos speaker or having to install a ceiling mounted speaker. [ Jeffery  Feb 22, 2017 ]
    This is the speakers that my husband has wanted for months and I thought it would be nice to get them for him. Also Klipsch is a very good name and quality product. [ Lisa  Feb 01, 2017 ]
    Best speaker for the money. The "on sale" price didn't hurt, either! [ Jeff  Jan 17, 2017 ]
    Best speakers on the market for my system upgrade for new Dennon Dolby Atmos receiver [ Stephen  Dec 16, 2016 ]
    Desired powerful ATMOS-ready speakers at a reasonable price [ Justin  Dec 16, 2016 ]
    I actually wanted the Martin Logan motion 40's but the price was more than i wanted to spend rite now. [ ROBERT  Nov 29, 2016 ]
    Was looking for a simple, quality, ATMOS-capable solution...this should fit the bill, can't wait to fire them up... [ Kevin  Nov 27, 2016 ]
    I was looking for a highly rated pair of front speakers with great sensitivity to use with my Yamaha AV receiver. Crutchfield is a trusted source I've used before. [ Thomas  Nov 23, 2016 ]
    Because it's a Klipsch with the Atmos speaker. My whole home theater speaker system 9.2.2 is now completely Klipsch. This was the final set I needed. These are replacing my 25 year old DCM 12 speakers which still sound good. I'm confident that these Klipsch RP-280FA's will blow them away! [ S  Nov 11, 2016 ]
    Previous experience with Crutchfield and current sale price make this purchase a no-brainer! [ Lyle  Sep 19, 2016 ]
    These are the anchors to a Dolby atmos 7.x.4 system. [ William  Aug 12, 2016 ]

    12 questions already asked

    It depends on how you plan to setup your home theatre. The SA's are a specific speaker designed for use with DTS:X and Dolby Atmos enabled receivers and are used to fill to fill a part of the sound field that the FA's physically cannot. If you're looking to enjoy the DTS:X or Dolby Atmos surround systems then you will need both but they are not used in standard 5.1/7.1 sound fields and not needed. [ Timothy  Dec 28, 2017 ]
    You don't need the 140SA but the added channels do add some depth you won't get otherwise. The nice thing about these (and the reason I bought them) is that they don't take up much space. They are designed to be in front of the room, either on the wall or on top of the floor speakers (the 280-FA's) which is where I have mine. The angle of the speaker projects the sound up off the ceiling to the back of the room without the need to run wiring or do a wireless setup. I first tried my system without them then I added these plus a sub woofer. All I can say is the sound is better with them, and I don't see space as much of an issue. [ Kevin  Dec 28, 2017 ]
    The RP-280FA has a built-in Dolby Atmos speaker. You don't have to purchase the RP-140SA. [ Aaron  Dec 28, 2017 ]
    No, you will not need the 140s. The 280s have the ATMOS speaker built into the top . Speakers perform flawlessly. [ Darrin  Dec 28, 2017 ]
    no you do not need the extra atmos speakers. but from what i understand, having more than two upfiring speakers will further enhance the atmos effect. [ Kevin  Dec 27, 2017 ]
    I have found that the if you buy the rp 280fa they will be able to process the Dolby Atmos that you are looking for. They have the Dolby atmos driver built right in. So there is no need for the Rp140,s unless you are going to use them as your back channels [ Anthony  Dec 27, 2017 ]
    If you want Atmos sounds. need Atmos .receiver & Atmos movies only can hear the difference. I use 7.2 Atmos receiver only front Atmos speakers on the top main spear front [ Sung  Dec 27, 2017 ]
    You don't need the 140SA's if you get the 280FA's, as they have the Atmos modules/speakers built in (at least for the front channels). You could still incorporate the 140SA's if you wanted to add height effects to the side/rears, so a 5.1.4 or 7.1.4 application. [ James  Dec 27, 2017 ]
    The mains are a good choice, very flexible for music and movies. I'd say focus making sure you match your center channel with the mains. The 450C goes nicely with these mains. Next focus on the most substantial sub you can afford. To finish answering your question, the surrounds are important but if you don't have the space you should be just fine with your 2nd choice. If you have a capable receiver it will auto-tweak the rears to timbre match the mains... Mains... Best center, best Sub(s) and then surrounds... Trust. [ Matthew  Dec 27, 2017 ]
    From what I can tell, the FA's contain the elevation speakers integrated into the top. If this is true, there is no reason to purchase the SA's. I'd ask a Crutchfield advisor if there is any doubt. [ Douglas  Dec 27, 2017 ]
    No. You only need the 280 fa [ ROB  Dec 27, 2017 ]
    I purchased the RP280FAs for my room which is about your size. I have a vaulted ceiling that ranges from 8' to 14' in height and my atmos speakers work well despite different heights for each speaker. In my receiver's speaker setup the volume for these are auto-adusted higher, but they are not over-worked even at high volume levels. That being said, the 17' height for the reflection off the stay ceiling sounds extreme to me. Both in volume and time delay. I would be tempted to just purchase the RP280Fs and pay the slight difference for a pair of their bookshelf speakers to serve as the atmos function mounted right at the transition to the stay ceiling. If wiring is a problem a person could always use Klipsch's RP140WMs for wireless. This would, of course, be a more expensive way to go. [ Thomas  Oct 01, 2017 ]
    Should be no problem.. most Atmos A/V receivers have room correction built in - so that can automatically correct room inconsistencies such as yours. The FAs are great if you want to use Atmos - otherwise the non-FAs are exactly the same. [ Scott  Sep 30, 2017 ]
    I'm not sure. Still in the process of getting all the pieces for my system so haven't fully tried it out yet. But my setup is in area with sloped ceilings 8' to 10'. With 14' to 17' ceilings the speakers would have to send sound up at least 10' above speakers just to reach the ceiling then back down to your seating area. That might be a little too far for the sound to travel to get the best affect. Forget what Crutchfield's policy is, but i think you can return them for full refund in 30 or 60 days, something like that. So maybe you can try them out to see if they work. Just remember to keep the boxes and not to rip them up when opening so you can reuse to ship back if you choose to. FYI, the speakers are big and so are the boxes. Shipping label from fed ex said 90lbs each. Also, when I ordered mine online, confirmation email said that they would come by freight truck and Fed Ex would call to set up delivery time because someone would have to signs for them. This didnt happen. They left these 2 big boxes with expensive speakers sitting on my front porch. Was not happy with that, especially since the boxes had pictures of the speakers on them. So i would confirm with crutchfield to get delivery call from Fed Ex for delivery. Fortunately our neighborhood is pretty decent with watchfull neighbors and nobody bothered them. Hope this helps. [ KEVIN  Sep 30, 2017 ]
    Yes, an additional speaker wire is needed to each left/right speaker. The wires are attached to the "Height R and one to the Height L" terminals of the amp. The speakers have two terminal connections on the back. Hope this answers your question. I use a Marantz 6011 amp. [ WILLIAM A  Jul 19, 2017 ]
    The main speakers (the forward-facing ones to the room) require wiring from one speaker output from your amplifier. The ATMOS speakers (those that face upward toward the ceiling) require wiring from another speaker output. In other words-- each of theses speakers provides 2 channels for your sound system. I hope this answers your question. Bruce PS. -- these are wonderful speakers! [ Bruce  Jul 19, 2017 ]
    Yes, you need to run a separate set of wires to power the Atmos speaker. [ Troy  Jul 19, 2017 ]
    Yes. You'll need one set of wires for the tower speakers and one set for the Atmos speakers on top. But the connections are close together for both sets on the back of speaker, so its a cleaner connection as far as not having to have speaker wires showing from out of the top of speaker. [ KEVIN  Jul 19, 2017 ]
    Yes. Take a look at the pics on the Crutchfield web site. Look at the pic of the back. Also, it requires an atoms enabled receiver. [ neel,  Jul 19, 2017 ]
    Yes, I did run 2 lines to the speakers. The bottom alone does not activate the vertical top speaker [ John  Jul 19, 2017 ]
    Yes, it is essentially two speakers. You will need a separate channel for the top speaker [ Anthony  Jul 19, 2017 ]
    Yes, it requires a separate set of wires and input on the receiver as well. The speakers are great, you will love them! I also purchased the Yamaha RX-A3060 receiver, it is outstanding as well! [ Christopher  Jul 19, 2017 ]
    Yes. You will need a wire (+) and (-) for the additional speaker in each tower. [ ANTHONY  Jul 19, 2017 ]
    Yes. The Atmos or height speakers have a separate connection on the back of the speaker. So you need to run a separate pair of wires bewteen the receiver and the speaker. [ joseph  Jul 19, 2017 ]
    I don't recall if it was magnetic or velco but the cover is recessed into the speaker so the entire top of the speaker is the same level and there is a small tab at the rear end that allows you to remove the cover if you want to ... hope this helps. [ MICHAEL D  May 15, 2017 ]
    They are just press fit into the top of the speakers. The fronts are magnetic. [ Bruce  May 14, 2017 ]
    The top grille fits into a recess, just a friction fit. [ Steve  May 13, 2017 ]
    The grill on the height channel speakers (located on the top) is held in place by friction. There is a recessed opening. When the grill is in place, it is flush with the top of the speaker. Btw, the front grill is magnetically attached. [ joseph  May 12, 2017 ]
    No. The front grille is magnetic but the atmos grille is press fit. It has a little tab on it to aid in removing it. Same material as the front though. [ RICHARD L  May 12, 2017 ]
    It's a well fitting friction fit. The cover is inset in the top of the case so that it doesn't protrude and is flat with the top. It has a small cloth tab at the back for easy removal. [ neel,  May 12, 2017 ]
    The grills have a little tab on the rear of them, but I tried pulling on each speakers tab hard and couldn't move it. The front ones are magnetic. They look like a tight fit. Maybe prying with a knife blade would do it, but I'm not going to. I do love the things and have the Klipsch Atmos angle rears. I run Dolby 7 & they're great, [ Marcus  May 12, 2017 ]
    The grill fits into the opening without magnets, it is a good snug fit i would recommend these speakers to anyone! the sound is overwhelming... you will never be disappointed... [ ROBERT  May 12, 2017 ]
    visuallyThe speakers are identical in shape and size but the wood veneer is actually a wood veneer finish, thus making it visiually different than the all black finish. [ Ken  May 25, 2017 ]
    You are Correct in that the pictures shown on the Website "Look the Same" because they ARE the same pictures for Both Style options. From my understanding, the Ebony Vinyl Veneer Finish is the same Finish that is on the other Klipsch Speakers, such as the RP-250s and is Klipsch's "Standard" finish on their Speakers, where the "Wood Grain" is very, very subtle. The Black Wood Veneer Finish is just like the Walnut Wood Veneer Finish , in that the "Wood Grain" is highly visible or more pronounced within the Finish, and lacks the general Finish look that is found on the Majority of All Home Speakers. Vinyl would indicate a Wrap/Sticker that is applied with an adhesive and "Looks" like Wood, but is Not Real wood. However, Veneer would indicate that there is 1/8 inch thin layer of Real Hardwood, no thicker than 1/8", bonded or glued to a cheaper surface by an Adhesive. This practice allows for more appealing looking pieces at a lower Cost. [ Bill  May 02, 2017 ]
    *** Meant that the ebony wood veneer has a real wood finish [ Robert  May 01, 2017 ]
    The ebony vinyl has a real veneered wood finish, the ebony vinyl is a laminate made to look like wood. [ Robert  May 01, 2017 ]
    I purchased the walnut wood veneer and I love the look, however to answer your question: Yes both are black, however the wood veneer is a different texture and most would argue is an upgraded finish over the vinyl veneer because it is a true wood grain look. [ Brent  May 01, 2017 ]
    I'm pretty sure they are the same. There's only 2 veneers, walnut and black. [ Andrew  May 01, 2017 ]
    The ported enclosure features a MDF cabinet finished with a premium wood-grain polymer veneer and a polymer front baffle. The speaker's rigid cabinet offers improved internal cross-bracing to minimize panel vibrations that can color sound. You will find this information, and more, by clicking the "Details" tab on the speaker's main webpage and scrolling down below the "Features & Specs" table. I hope that helps. My Bio: https://www.crutchfield.com/Support/Bio.aspx?bio=5 [ Ryan  Apr 26, 2017 ]  Staff
    There should be metal straps between the top and bottom right bindersand one between the top and bottom left binders. The straps then make the connection go to both sets of binders Hope this helps. Dave [ DAVE  Mar 26, 2017 ]
    You will need to verify that you have the gold-plated bar connecting the (2) red lower connections and the another gold-plated bar connecting the (2) black lower connections. This will allow a single set of Speaker wire to power the Woofer & Tweeter simultaneously. If this bar is not present, then you have the speakers configured for Bi-amp wiring, which requires (2) speaker cables, one for each set and will drive the Woofer & Tweeter separately. [ Bill  Mar 26, 2017 ]
    I hope this isn't too obvious but that is where I will start. There should be gold colored jumpers between the red pair of binding posts and the black pair of binding posts. Since one speaker works it should have these two jumpers on it so you can see what they look like. If the jumpers are missing I am sure Crutchfield can send you a pair or you can use a short piece of speaker cable red post to red post black to black. Just don't go from red to black or you will break your amp. In your manual it will show these jumping straps. If the straps are already there or you use short pieces of speaker cable and both the horn and woofers do not play at the same time I am afraid your speaker crossover is broken and the speaker must be RMA'd. I hope this helps. [ Christine  Mar 26, 2017 ]
    It sounds like you are connecting the wires to the Bi-Amp posts or have your receiver set to bi-amp sound mode. Bi-amp is where you utilize (2) receivers or (2) sets of speaker wires to connect two sets of binding posts on (1) Speaker to drive the (Woofers) & the (Tweeters) individuality, instead of using the regular Front Speaker Posts that will drive the Woofer & Tweeters simultaneously. I would verify your Speaker connections on the back of your Receiver and also verify your Surround/Stereo Mode to make sure it is Not set to Bi-Amp. [ Bill  Mar 26, 2017 ]
    There should be a metal bridge connecting the top and bottom posts. [ Gustavo  Mar 26, 2017 ]
    Hi Laura, there should be a small metal piece that connects the upper and lower bindings when you use one set. Check to see if you have that piece and also that all 4 posts are screwed in tightly. [ Brent  Mar 26, 2017 ]
    There are two gold rectangles that connect the two lower binding posts. The speaker woofers and tweeters have separate binding posts to allow for bi-amping. [ Jarret  Mar 25, 2017 ]
    You need to hook them both up. Run the bottom speaker wire to the front speakers on the receiver and the top wire to height or surround back. [ Deanna  Mar 25, 2017 ]
    I actually had Best Buy haul a set of R28f speakers into the Magnolia room to compare with a $3000 set of B&Ws of similar size. Both I and the magnolia floor manager agreed the B&W sounded flat by comparison. The R28s do not use the identical components as the 280s but I am sure they are Comparable in sound quality. The 280 cabinet construction and build quality is far superior to the r28f. [ William  Mar 02, 2017 ]
    I own 4 RP-280FA's and love them. Excellent sound. I also have the RP-450CA (center). It is fantastic. Great clear voices from it. And, the R-115SW (sub) that just knocks the low's right out of the ballpark. They are all big heavy speakers. My only complaint is the 280FA's have little rubber stick-on pads to protect hard wood floors. They suck! There should be screw in pads to go into the holes that you put the carpet spikes into. [ joseph  Mar 02, 2017 ]
    Thanks for your question. For information on comparing two or more models I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences and help you make the best choice for your system and your budget. [ Krissy  Mar 02, 2017 ]  Staff
    this speaker is rated at 150 watts RMS, my Denon AVR X5200 is rated at 140 per channel. They sound great at low volume as well as high. As for the base, it sticks out on the sides about 1/2 in. its sorta like a platform for the speaker and it slightly angled so that the back of the speaker is slightly lower than the front giving you an upward firing of the sound. I have played theses speakers without my subs and the bass that's produced is rich and clean. If you have the room for theses I highly recommend them. I hope this helps. [ Jose F.  Nov 17, 2016 ]
    I have th Yamaha RX-A860 and they are just fine with regard to power requirements. The base is the same width. [ Keith  Nov 16, 2016 ]
    Justin, I can't give you a firm answer for question one, but I can tell you that I am using a 5-7 year old Harman Kardon AVR3600 and it drives the speakers just fine. You could look of the specs on this and compare it to your unit. For question 2 the wide of the unit at the base is approx 10 9/16" the width of the cabinete itself is about 9 5/8". Also the depth at the based is about 19 3/4". I hope this helps. Dave [ DAVE  Nov 16, 2016 ]
    1. I have no idea. 2. 10-9/16" is the width of the base. The tower itself is 9-1/2" inches wide. [ joseph  Nov 16, 2016 ]
    There are indeed three terminal connections on this speaker. The bottom two are connected by a bar for a typical wiring configuration. If the bars are removed the main speaker may now be bi-amped. Be sure to check your amp's configuration to see if this feature can be enabled. My Yamaha Aventage 2060 did improve my speaker performance in the bi-amp configuration. The top terminals are for the atmos speaker. [ Thomas  Oct 01, 2017 ]
    There are only two pair of terminals on back of speaker. You connect the atmos terminals on speaker to the "Height" terminals on your amp. Connect your main left/right amp terminals to the other terminals on speakers. [ WILLIAM A  Jul 19, 2017 ]
    The Klipsch RP-280FA floor-standing speaker offers dual binding post terminals for the main channel and single binding post terminals for the height (Atmos) channel. Each binding post features a positive (red) and negative (black) terminal and will accept banana plugs (single only), pin-connectors, spade-connectors, and bare wire from your receiver. [ Larry  Dec 03, 2015 ]  Staff
    I forwarded your question to an Advisor and they responded with the following: Klipsch offers the horn tweeters for very direct sound dispersion. They will perfectly fine with the room dimensions listed. If you would like to discuss further you can contact an Advisor directly by phone (1-800-324-9695) or online chat. [ Krissy  Sep 01, 2015 ]  Staff
    Articles
     
     
     
     

    would like to send you to a different page.

    Go there