Skip Navigation

Monitor Audio Gold 300

Floor-standing speaker (Piano Black)

1 Review | 1 question - 3 answers

Item # 893G300PB

Low Stock

 Ships FREE

Add to Cart

Ask an expert

Our VA-based experts can help.

1.844.623.0050

Chat Call Me Email

Overview

Our take on the Monitor Audio Gold 300

The Gold 300 is Monitor Audio's top-of-line Gold series speaker. It's carefully engineered to fill the largest listening room or home theater with dynamic, natural sound that will impress even the most critical listener. This level of deep musicality only happens when a company pays fanatical attention to every detail. The Gold 300 offers all of the goodness that made previous Monitor Audio Gold speakers so exceptional, but adds refinements for even better performance.

Exceptional sound that'll "wow" audiophiles

The Gold 300 is Monitor Audio's top-of-line Gold series speaker. It's carefully engineered to fill the largest listening room or home theater with dynamic, natural sound that will impress even the most critical listener. This level of deep musicality only happens when a company pays fanatical attention to every detail. The Gold 300 offers all of the goodness that made previous Monitor Audio Gold speakers so exceptional, but adds refinements for even better performance.


Monitor Audio Gold 300 Piano Black

Monitor Audio's advanced driver technology and meticulous construction help give the Gold 300 tower stunning, room-filling sound.

Continuing advancements in driver design for even better sound

Refined ribbon tweeters

For their latest Gold series speakers, Monitor Audio again relies on their acclaimed ribbon transducers. Made from ultra-thin layers of a ceramic-coated aluminum/magnesium alloy developed by the aerospace industry for jet engines, these ultra low-mass ribbons effortlessly deliver extended high-frequency response out to 60,000 Hz. To increase performance even further, Monitor has tightened manufacturing tolerances to allow these capable drivers to offer consistently more open and transparent sound. Greater production uniformity also means closer matching of tweeter pairs in a stereo system, providing enhanced imaging and a greater sense of detail. 

Newly designed woofer cones

The speaker's tight, responsive bass and dynamic midrange come courtesy of Monitor's twin 6-1/2" C-CAM woofers and 4" midrange with RST® (Rigid Surface Technology). Created from the same lightweight alloy as the tweeters, these drivers are strengthened and stiffened even further using a dimpled RST cone surface. The cone also takes the form of a continuous radiating dish, eliminating the central voice-coil opening and dust cap to allow a longer voice coil and larger motor to sit behind the cone. This more efficient assembly provides greater drive force, longer excursions, and lower distortion, for cleaner, more extended and accurate bass definition.

Side-by-side listening tests at Monitor Audio comparing previous models demonstrated that the new Gold models sound more open and dynamic, with a soundstage that is both taller and wider than the previous model.


Attention to detail, inside and out

Wired for transparent sound

Meticulous engineering and hours of focused listening go into each Gold series speaker. The Gold 300's woofers, midrange, and tweeter are connected to an equally sophisticated crossover network made with audiophile-grade components. Monitor also chose their Pureflow® Silver cabling to make all internal connections. Together, these refinements give you a smoother, flatter frequency response, more powerful dynamics, and faster transients, for sound with real presence and immediacy.

Vault-like cabinet construction

Instead of conventional mounting screws, each driver is held in place using a single tensioned rod, or through-bolt, that threads into its back plate, then secures to the back of the cabinet. The bolt not only acts as a rigid cabinet brace to reduce box coloration, it also eliminates the need for traditional driver mounting hardware, effectively decoupling the driver and front baffle to eliminate another source of unwanted resonance.

Monitor Audio speakers have long been known for their sturdy, vault-like cabinet construction. The Gold 300's well-damped, cross-braced enclosure features a curved profile with large-radius edges. This design helps further increase cabinet rigidity while reducing both external diffraction and internal standing waves that can color sound and reduce accuracy.

Gorgeous, furniture-grade finishes

The speaker's exterior comes clad in a mirror-like black piano lacquer or real ebony veneer finish. Eleven layers of lacquer are built-up individually to achieve a luxuriously deep finish. Once assembled, the real-wood cabinets are hand finished to ensure absolute precision in the joinery and in the grain matching between each pair. Monitor tops off each speaker with an attractive "floating" magnetic cloth grille that features invisible attachments to give the Gold 300 a clean, classic look whether you use them with the grilles on or off.

Product Highlights:

  • frequency response: 30-60,000 Hz
  • sensitivity: 90 dB
  • impedance: 8 ohms
  • recommended amplifier power: 100-200 watts
  • ultra-rigid, lightweight C-CAM® (Ceramic-Coated Aluminum/Magnesium) cone material used to provide high efficiency and low distortion
  • close-tolerance C-CAM ribbon high-frequency transducer for detailed sound, enhanced imaging, and extended high-frequency response
  • 4" C-CAM midrange with latest generation RST® (Rigid Surface Technology) to enhance stiffness and reduce mass for greater speed and accuracy
  • dual 6-1/2" C-CAM woofers with latest-generation RST for powerful, low-distortion bass
  • heavily braced, curved cabinets for increased rigidity and reduced internal standing waves
  • single bolt-through driver attachment provides mechanical decoupling and increased cabinet rigidity for greater clarity and resolution
  • bass-reflex (ported) design with HiVe® II technology for reduced port turbulence and higher velocity airflow
  • high-quality crossovers with premium-grade polypropylene film capacitors for greater accuracy
  • dual gold-plated five-way binding post speaker terminals with bi-amp/bi-wire capability
  • speakers wired internally with specialized Pureflow® Silver cable
  • detachable die-cast alloy base with adjustable feet plus included rubber pads and carpet spikes
  • 12-1/2"W x 43-1/2"H x 14-9/16"D (overall dimensions including base, spikes, and speaker terminals)
  • weight: 59.9 lbs.
  • warranty: 5 years
  • Our 60-day money-back guarantee

What's in the Box:

  • Floorstanding loudspeaker
  • Grille
  • Base (2-pieces)
  • 4 Feet
  • 4 Spikes
  • 4 Bolts
  • Foam port plug
  • Owner's Manual
  • Important Safety Instructions
Reviews

Monitor Audio Gold 300 Reviews

Average Customer Review(s):

(1 Review)
rewards card
Great Gear Giveaway

Submit a review and enter to win a $350 rewards card

Review this product

Thanks for submitting your review

Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

Your Review

Use the stars below to rate the overall product on a scale of 1-5
1500
Upload your photos

Not visible. Email associated with order.
(e.g., Charlottesville, VA)

Additional Fields (optional)

500
500

By submitting this review, you agree to our terms and review guidelines.

Filter by rating

Customer photos


<< >>
Details

Hands-on research

Features and Specs

General
Enclosure Bass Reflex
Finish MDF/Lacquer
Color Gloss Black
Tweeter Ribbon
Tweeter Size (inches) ---
Midrange Size (inches) 4
Woofer Size (inches) 6.5
Woofer Composition C-CAM/RST
Woofer Surround Rubber
Built-in Powered Sub No
Video-Shielded No
Connector Type Post
Bi-amp Inputs Yes
Parts Warranty 5 Years
Labor Warranty 5 Years
Specifications
Power Range 100-200
Frequency Response 30-60k Hz
Sensitivity 90 dB
Impedance (Ohms) 8
Subwoofer Amp Power ---
Height (inches) 42-5/8
Width (inches) 12-1/2
Depth (inches) 14-5/8
Weight 59.9 lbs

Product Research

Features

3-Way Speaker Design: The Monitor Audio Gold series 300 floorstanding loudspeaker employs a 3-way driver design with a single C-CAM ribbon tweeter, one 4" C-CAM/RST midrange driver and two 6.5" C-CAM/RST bass woofers. This 3-way configuration delivers an impressive natural, detailed, dynamic audio performance.

  • Newly Designed Tweeter: The new design C-CAM Ribbon tweeter has been employed to propel high frequency reproduction to well beyond 60 kHz, at least two octaves beyond the threshold of human hearing.
  • Specially Designed Midrange Driver: A specially developed 4" mid-range driver with an "under-hung" voice coil and motor system ensures very low distortion.
  • Dual Bass Drivers: Dual 6.5" bass drivers featuring a larger piston area offer higher efficiency and better dynamics.

C-CAM Technology: C-CAM driver technology is used throughout the Gold series 300 floorstanding loudspeaker, providing coherent tonal balance and sonic signature across the entering audio frequency spectrum.

  • C-CAM Ribbon Tweeter: Monitor Audio's proprietary ribbon tweeter design uses an ultra-thin sandwich of C-CAM alloy suspended in a powerful transverse magnetic field of high energy NeFeB rare earth magnets. The ribbon serves as both voice coil and radiating diaphragm, with every part of the ribbon driven directly and simultaneously without energy storage. Having a mass of just 18mg, its diaphragm is able to start and stop in an instant, producing a transient response capable of defining the leading edge and natural harmonic resonance of complex musical sounds. Specified to reach ultra-high frequencies, this ribbon tweeter will reproduce with ease every last nuance and detail from vinyl, CD, DVD Audio, and SACD, together with the wider bandwidth of Blu-ray or high resolution digital audio.
  • C-CAM Cone Midrange Driver and Bass Woofers: Ceramic-Coated Aluminum/Magnesium is a material originally developed by the aerospace industry for jet engine components. Its properties are ideal for loudspeaker cones being extremely rigid, yet light enough to yield high overall efficiency. In manufacture, aluminum/magnesium alloy undergoes a three-stage stress-relieving process to remove surface deformation and molecular weakness. Once formed, the alloy cone is subjected to a high temperature anodic coating process in which a layer of pure ceramic alumina is depleted onto its surfaces to a depth of 50 microns, producing a completely rigid sandwich of alloy and heat-dissipating ceramic material. Conventional cones are liable to flex or twist in operation, producing a significant level of audible distortion. C-CAM cones have a much higher resistance to bending stress and therefore exhibit much greater fidelity over their entire operating range.

RST (Rigid Surface Technology): The Gold series floorstanding speaker combines Rigid Surface Technology (RST) with its C-CAM cone woofer design for a stronger, lighter weight cone. The Rigid Surface Technology (RST) cone profile was inspired by the Japanese art of Origami, which demonstrates how a very light material (like paper) can be strengthened and made more rigid by making small and precise folds on it surface. Developed and perfect using sophisticated computer modeling (Finite Element Analysis), the Silver series midbass drivers have been strengthened by a pattern of dimples. RST significantly increases cone rigidity, allowing the radiating surfaces to resist mechanical bending forces, which can twist the  shape of conventional driver cones to produce distorted sound. The strengthening effect of RST means that Monitor Audio can use thinner, lighter and more responsive C-CM cones which provide speed and accuracy while offering greatly reduced distortion. The RST patterns also help to displace standing waves that can propagate on the cone's surface.

Single Through-Bolt Mount: The tweeter, midrange driver, and bass woofers are fixed to the cabinet with single through-bolt driver fixing mounts. This single-through-bolt mount design provides mechanical de-coupling and enhanced midband clarity and resolution. The through-bolts also act as rigid cross bracing to give a very solid non-resonant cabinet.

MDF Curved Enclosure w/ Magnetic Grille: The G300 employs a MDF enclosure for accurate, uncolored sound. Rigid 20mm MDF construction is used throughout the enclosure with radial and cross-bracing techniques for high rigidity and low cabinet coloration. In addition, the curved cabinet profile aids in increased rigidity and reduced internal standing waves. In addition, the tower speaker comes with a magnetic grille.

HiVe II Bass Reflex Port: The G300 uses a bass reflex cabinet (single rear firing port) with Monitor Audio's HiVe II port design for greater efficiency and bigger bass response from a slim tower speaker. The HiVe II bass reflex port is shaped to have the same effect on airflow as a gun-barrel on a bullet. Rifled grooves inside the port help to accelerate the flow and reduce turbulence, so air moves in and out of the port more efficiently, for a faster more dynamic bass response.

Note: If the bass is too boomy, you can insert the included foam port plug into the speaker's rear-firing port to tighten and lessen the bass.

High Quality Crossover & Wiring: The G300 uses high quality crossovers (LF/MF=790Hz, MF/HF=2.3kHz) with premium grade polypropylene film capacitors. The speaker also utilizes "Pureflow" silver plated OFC copper internal cabling.

Dual Gold-Plated Binding Posts: The floorstanding loudspeaker has two sets of gold-plated binding posts connected by wire-jumpers. The gold-plated binding posts will accept bare wire (up to 10AWG), pin connectors, & banana plugs (single only). Using the dual posts, you can bi-wire or bi-amp the speaker. Bi-wiring or bi-amping the speaker provides improved bass & treble performance. If you decide to bi-wire or bi-amp, you must remove the jumpers between the terminal posts (failure to do this could result in damage to your amplifier and loudspeakers).

  • Bi-Wiring: Bi-wiring can provide noticeable improvements in the overall transparency of your loudspeakers. Run separate speaker wires to the low & high frequency drivers from a single amplifier (the upper set of binding posts are for the high frequency drivers; the lower set of binding posts are for the low frequency drivers).
  • Bi-Amping: Bi-amping allows you to use separate amplifiers for the high & low frequency sections of your loudspeaker for greater dynamic range & lower distortion. We recommend that your separate amplifiers have identical gain to preserve the speaker's voicing balance.
Note: The binding-post speaker terminals are color-coded (red+/black-) and are at floor-level for easy identification and hookup.

Base with Rubber or Spiked Feet: The Gold series 300 floorstanding speaker includes a two-piece base which will need to be installed using the included bolts. The G300 comes with four rubber feet that screw into the base for use on hardwood or tile floors. It also includes four spikes which screw into the rubber feet for carpeted floors. The spike feet add approximately 0.875" to the height of the speakers versus the rubber feet.

Note: Due to the tapered shape of the cabinet, it is not recommended to install the speaker without the base or feet, as the speaker is likely to be unstable.

Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Accessories
Q & A

Customer Q&A

1 question already asked

I have a pair of the piano black Gold 300's for many months. No complaints at all. They look great and sound even better. I've had Advents, Polks and Elacs, but these MA's are here to stay. I have a sub, but probably don't need it. [ Joel  Mar 06, 2018 ]
It may be a bit late for you but there is a reviiew in The Absolute Sound magazine from August 2016. Favorable review. I like large floorstanding speakers myself and am considering these. I have a pair of older MA Silver 8i's that still sound awesome at 15 years of age. [ Jeff_  Mar 05, 2017 ]
We have not received any answers from other customers on your question. I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They should be able to help answer your questions. [ Kenny  Mar 30, 2016 ]  Staff
Articles
 
 
 
 

would like to send you to a different page.

Go there