Features

Overview: The GPC M2002 mil-spec protective case was specifically designed for the DJI Matrice 200 or Matrice 210RTK quadcopter systems and accessories. Configured to provide the most amount of storage space in as compact a design as possible, the case can accommodate 4 camera options, up to 14 TB50s or 8 TB55s along with 3 options for monitors. With the expectancy of different parts being needed for different missions, the GPC case has a total of 36 cavities for different camera and battery configurations. Made in the U.S.A., the M2002 has a lifetime warranty for the original purchaser.

Outer Shell: The M2002 features an SKB mil-spec outer shell with an industrial strength injection molded pull handle. It also includes molded-in hinges, for added protection, a trigger release latch system, and padlock holes with stainless steel padlock protector clips. Convenience features include snap-down rubber cushion grip handles, in-line skate style wheels, and a retractable injection molded pull-handle. The case carries the following specifications: Waterproof and dust tight design (MIL-C-4150J), an ambient pressure equalization valve (MIL-STD-648C), resistance to UV, solvents, corrosion and fungus (MIL-STD-810F), and resistance to impact damage (MIL-STD-810F).

Interior: The interior of the M2002 is made from closed cell polyethylene foam, resisting both water and dust infiltration, with a blue MDL cap for added durability. Two layers of foam are provided, with 36 pre-cut cavities to securely hold your quadcopter and accessories. These have all been precision cut using water-jet technology. The included product information sheet has a handy legend listing which cavities accommodate which parts, and an interactive online legend provides even more detail.

Interior Legend: The following lists describe which parts are designed to fit the M2002 case:

• Top Layer:
  • DJI Matrice 200 or 210RTK (without cameras attached and landing gear removed)
  • Landing gear
  • 1 Controller (Standard or Cendence without Patch Antenna)
  • 14 TB50s (including 2 on UAV) or 8 TB55s (including 2 on UAV)
  • 2 iPads or CrystalSkys (7.85" or 5.5")
  • 2 Battery chargers
  • Charger cables
  • 2 Battery charging hubs
  • 2 Charger cable storage slots
  • Storage for 2 sets of props (with slot for calibration panel)
• Bottom Layer:
  • 1 Z30 and 1 XT or camera case
  • 1 X4 or X5
  • X5 Lens case
  • 1 Controller (Standard or Cendence without Patch Antenna)
  • 1 CrystalSky battery charger
  • 2 CrystalSky batteries
  • 3 Accessory cavities (1 under UAV)
  • 2 Cendence antennas

Dimensions:

• Exterior: Width - 26.50", Height - 15.750", Depth - 26.50"
• Interior: Width - 24.0", Height - 14.0", Depth - 24.0"