Super-slim, full-motion wall mount with articulating arm for 51"-80" TVs
Our take on the Sanus VLF510 by Crutchfield's Ralph Graves
A tilting, swiveling mount for larger TVs
The thin Sanus VLF510 mount can hold your TV a scant 1-3/8" from the wall, or extend it outward 10-3/8". You can swivel the TV left or right up to 30° and tilt it downward as far as 10° for optimal viewing. The mount's brackets can easily be shifted to the right or left, in case the wall studs are a little off-center. The VLF510 can support a TV with a screen size of up to 80", and a weight of up to 125 lbs.
Will this mount work with my TV?
Use the Sanus MountFinder™ to see a list of mounts that work with your specific TV.
Where do I drill the holes?
Tell the Sanus HeightFinder™ Installation Assistant how high you want your TV, and it tells you exactly where to drill.
- fits most flat-panel plasma and LCD TVs from 51"-80"
- heavy-gauge steel construction with powder-coated finish
- supports up to 125 lbs.
- extends TV up to 10-3/8" from wall
- swivel range: ±30°
- tilt range: 0 to -10°
- stud-mounting required
- movable brackets for off-center stud placement
- includes all necessary hardware
- conceals cables for a neat on-wall TV installation
- 32-1/8"W x 20-5/16"H x 1-9/16"D
- warranty: 10 years
- Our 60-day money-back guarantee
What's in the Box:
- Articulating wall-brakcet
- 2 TV brackets
- 2 Covers
- Four M4 x 12mm screws
- Four M4 x 30mm screws
- Four M6 x 14mm screws
- Four M6 x 40mm screws
- Four M8 x 16mm screws
- Four M8 x 40mm screws
- Four M4 x 25mm screws
- Two 10-32" x 3/8" screws
- Eight 10-32" x 3/4" screws
- Four 5/6" x 2-3/4" lag bolts
- 4 Wall-anchors
- Four M4 washers
- Four M6/M8 washers
- Four 5/16" washers
- Four 14mm spacers
- Four 24mm spacers
- Cable-management assembly
- 2 Click-caps
- 4 End-caps
- 1/8" Hex-key
- 5/32" Hex-key
- 3mm Hex-key
- Instruction Manual
- Wall-Plate Template
Very versatile Easy to install Good value
Anonymous, University Pl, WA
Sanus VLF510 Reviews
Average Customer Review(s):
Thanks for submitting your review
Full-Motion Design: The Sanus Premium Series VLF510 full-motion, wall-mount bracket provides a 3-points of movement for an optimal viewing position. The VLF510 extends from the wall (1.375"-10"), tilts up/down (+0°/-10°), and swivels left or right (+/-30°) for easy viewing anywhere in the room.
TV Capacity: The Sanus Premium Series VLF510 wall-mount bracket is designed to support flat-panel TVs from 51" to 80", weighing up to 125 lbs.
VESA Bolt Pattern: The VLF510 full-motion, wall-mount bracket accommodates a horizontal hole spacing on back of the TV of 145mm-730mm and a vertical hole spacing of 25mm-420mm. The Sanus VLF510 comes with M4, M6, and M8 size bolts of differing lengths to mount the bracket to your TV. It will accommodate the following VESA hole patterns in accordance with industry standards set by the Video Electronics Standards Association:
- 200 x 100, 200 x 200, 200 x 300, 200 x 400
- 300 x 100, 300 x 200, 300 x 300, 300 x 400
- 400 x 100, 400 x 200, 400 x 300, 400 x 400
- 500 x 100, 500 x 200, 500 x 300, 500 x 400
- 600 x 100, 600 x 200, 600 x 300, 600 x 400
- 700 x 200, 700 x 300, 700 x 400
Note: Additional hardware may be required for your specific model of TV. For example; shorter or longer screws, thicker or slimmer washers or spacers. These additional accessories can often be found at your local hardware store.
Heavy-Duty Construction: The bracket is constructed of heavy-gauge steel and high-impact plastic with a durable powder-coated black finish.
Perfect Positioning: The TV brackets and arm assembly let your television slide from side-to-side on the wall-mount plate for perfect positioning of the TV on your wall. There are also two level adjustment screws on the TV bracket to raise or lower (+/-2°) the sides of the TV.
Note: The wall plate must be mounted to wall studs or anchored to a block or concrete wall using the supplied lag bolts (and wall-anchors). The slots in the wall plate can accommodate wall studs 16" and 24" on center.
Decorative Covers & Cable Management: The VLF510 has a finished appearance with a decorative cover that conceals assembly and mounting hardware. With its cable management guide, the VLF510 keeps loose cables organized, creating a clean appearance without compromising TV movement.
Installation Tools: The following tools are recommended for mounting the VLF510:
- Tape measure
- Stud finder
- 7/32 Drill bit (for wood stud)
- 3/8" Drill bit (for masonry)
- 1/2" Socket wrench
- Phillips-Head Screw driver
- Width = 32.25"
- Height = 20.375"
- Depth = 1.375"-10.3125"
- Articulating Wall-Bracket:
- Width = 32.25"
- Height = 19.1825"
- Depth = 1.375" - 10.3125"
- TV Brackets:
- Width = 1.4375"
- Height = 20.25"
- Depth = 1.125"
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
Why did you buy this?
Slim profile [ T Jun 23, 2018 ]
Aaron [ G Nov 28, 2017 ]
Good price for a 'slim' tilting mount; good reviews from others; positive experience with three previous Sanus mounts. [ S Aug 14, 2017 ]
Reviews [ Brian Aug 06, 2017 ]
Very low profile [ Patrick Jul 08, 2017 ]
Comes highly recomended [ GUILLERMO Feb 22, 2017 ]
Slim design, extends and tilts. [ Heath Feb 18, 2017 ]
Need very slim full range wall mount for a custom installation. [ Dennis Sep 25, 2016 ]
Slim design, almost flush with wall [ Jennifer Sep 05, 2016 ]
Your advisors rec [ PHIL Aug 07, 2016 ]
Low profile full motion mount. Seems like it will be high quality. [ Robert Aug 01, 2016 ]
2 questions already asked
This was a gift and I didn't Hang it. There are brackets that screw onto the back of the tv, and then maybe it would be then hung onto the main piece which would be attached to the wall. Sorry I could not help more. [ Robert Sep 24, 2016 ]
yes [ EUGENE Sep 24, 2016 ]
Yes it does.Tilt TV up from bottom slightly ,and then lift TV to un hook. [ ALAN Sep 24, 2016 ]
Yes [ ROBERT Sep 24, 2016 ]
I would think so, I have a large Sony hanging on it and it is working out fine. [ Robert Aug 05, 2016 ]
I don't know. It's still in the box and will be installed tomorrow. I bought it because a Crutchfield sales tech said it would work with the 49 inch Sony we are installing. [ Philip Aug 05, 2016 ]