Skip Navigation

Pinpoint AM20

Wall- and ceiling-mount speaker bracket (White)

68 Reviews | 5 questions - 13 answers

Item # 121AM20W

This item is no longer available.

Shop all Speaker Wall Mounts


Our take on the Pinpoint AM20

Securely mount compact satellite speakers to your wall or ceiling with the Pinpoint AM20 bracket. Its ball-and-socket joint gives you a 90° pivot, and you can rotate the mounting arm a full 360° for added positioning flexibility. This bracket is compatible with a wide range of satellite speakers, including those found in many surround sound speaker systems.

Securely mount compact satellite speakers to your wall or ceiling with the Pinpoint AM20 bracket. Its ball-and-socket joint gives you a 90° pivot, and you can rotate the mounting arm a full 360° for added positioning flexibility. This bracket is compatible with a wide range of satellite speakers, including those found in many surround sound speaker systems.

The AM20 is perfect for folks who want to connect in-wall speaker cable to a wall-mounted speaker. It includes a metal mounting plate that can attach directly to a standard single-gang junction box. Just install a J-box where you'd like to mount your speaker, and you'll have a safe, clean way for your in-wall cable to exit your wall. You'll enjoy a clean, uncluttered appearance with no exposed wires.

Product Highlights:

  • for wall- or ceiling-mounted satellite speakers
  • weight capacity: 11 lbs. when mounted to a stud
  • can mount directly to single-gang J-box
  • rotates 360° and pivots 90°
  • attaches to speaker's keyhole slot or threaded inserts
  • mounting hardware included
  • warranty: 5 years
  • Our 60-day money-back guarantee

What's in the Box:

  • White adjustable speaker bracket assembly
  • White dual point mounting bracket
  • White extension arm
  • White wall plate
  • 6mm x 25mm Bolt
  • Two 6mm x 12mm bolts
  • Two 5mm x 12mm bolts
  • 5mm x 25mm Bolt
  • 1/4"-20 x 1" Bolt
  • 1/4-20 x 1.75" Bolt
  • Two 1/4"-20 x 1/2" bolts
  • Two 5mm x 31mm wood-screws
  • Two 3.5mm x 30mm machine screws
  • Two 6mm flat-washers
  • 1/4" Flat-washer
  • 1/4" Lock-washer
  • 5mm Threaded screw-cap
  • 2 Plastic drywall anchors
  • Assembly and Mounting Instructions sheet

While I could have fabricated my own, and have done so in the past, this was worth the time savings. Everything is included, makes install very easy.

Andrew, Tomball, TX


Pinpoint AM20 Reviews

Average Customer Review(s):

(68 Reviews)
rewards card
Great Gear Giveaway

Submit a review and enter to win a $350 rewards card

Review this product

Thanks for submitting your review

Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

Your Review

Use the stars below to rate the overall product on a scale of 1-5
Upload your photos

Not visible. Email associated with order.
(e.g., Charlottesville, VA)

Additional Fields (optional)


By submitting this review, you agree to our terms and review guidelines.

Filter by rating

Customer photos

<< >>

Hands-on research

Product Research


Overview: The Pinpoint AM20 Universal Home Theater Speaker Wall/Ceiling Bracket is suitable for all home theater satellite speakers with the following types of mountings - Single Threaded insert, Dual threaded inserts, Keyhole. This bracket is a complete mounting solution for home theater speakers and will work for both wall or ceiling applications. This speaker bracket also comes with a steel adapter plate that allows the speaker bracket to attach directly to a single ganged electrical box if your home is pre-wired. In addition, the bracket comes supplied with a short-arm (45mm) and an extension-arm (100mm) to place your speaker closer or further away from the wall or ceiling. The AM20 speaker bracket supports speakers up to 11 lbs. Once your speaker is mounted the AM20 allows you to rotate your speaker 360-degrees and pivot the speaker 90-degrees for precise positioning of the speaker in your home theater system. The AM20 comes supplied with all the necessary hardware to mount your speaker to the bracket and the bracket to your wall or ceiling.

Note: The AM20 is sold individually as a single speaker bracket; not in pairs. The AM20 is available in the following finishes - Black, White and Silver.

Speaker Mounts: The bracket works with the following types of satellite speakers mounts:

  • Single Threaded Insert: If the speaker has a single threaded insert, one of the supplied long screws (M5 x 25mm, M6 x 25mm, 1/4"-20 x 1", or 1/4"-20 x 1.75") can be used to attach the speaker to the bracket using the single point adapter.
  • Dual Threaded Inserts: If the speaker has dual threaded inserts, you must first attach the dual point adapter plate to the bracket, then use the shorter screw pairs (M5 x 12mm, M6 x 12mm, or 1/4"-20 x 1") to attach the speaker to the bracket. Screw spacing for the dual point adapter plate is 1.9375" to 2.625"
  • Keyhole Slot: If the speaker has a keyhole slot, you must first loosely attach the M5 threaded screw-cap to the M5 x 12mm screw through the single point adapter. The head of the screw is then inserted into the keyhole slot and tightened to hold the speaker firmly.

Wall Mounting: The speaker bracket's metal mounting plate is first mounted to the wall in a vertical position. There are 2 mounting holes with a screw spacing of 1.875" to 2.625" for the supplied wood screws, plus a raised lip for routing the speaker wire through the wall. Once the metal mounting plate is secured to the wall, the cover plate snaps over the metal mounting plate for a clean and professional look. In addition, the speaker bracket comes supplied with a steel adapter plate that allows the AM20 to attach directly to a single ganged electrical box if your home is pre-wired.

Mounting Requirement: It is recommended that the bracket be mounted to a wall or ceiling stud. If the only location is drywall for ceiling or wall mounting then it will necessary to use the supplied drywall anchors for a speaker up to 5 lbs. If your speaker is over 5 lbs, it will be necessary to obtain high quality drywall anchors like Buildex E-Z Toggle or toggler Anchor available at most hardware stores in the US. 


  • Bracket With Short Arm: Width = 2.045", Height = 3.655", Depth = 3.548"
  • Bracket With Extension-Arm: Width = 2.045", Height = 3.655", Depth = 5.763"


Our Product Research Team

At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.

Q & A

Customer Q&A

Crutchfield asked  
Why did you buy this?

Compact design with cable routing and load requirements to support speakers purchased for ceiling mount. [ Newton C.  Nov 27, 2017 ]
Holds heavier speakers up to 11 lbs. and allows swiveling and tilts downward for high wall mounting. [ ALLEN  Nov 23, 2017 ]
having both options of plate and direct bracket and good load capacity with more flexible options than other mounts. Also advisor at crutchfield recommended it. [ Harpreet  Nov 18, 2017 ]
Great reviews and hides cables in the same plate that the speakers are attached on. [ A  Nov 14, 2017 ]
works perfectly to mount satellite speakers in the center of my living room [ Ricky  Oct 31, 2017 ]
Good price on a very clean mounting solution for speakers. [ Jamie  Jan 30, 2017 ]
The ability to thread CL2 in wall wiring directly to speaker without terminating w banana plugs or such [ Marco  Jan 20, 2017 ]
One speaker at home I am working on needed wall mount, customer preferred darker color. [ William  Jan 10, 2017 ]
ratings/recommendation [ Jon  Oct 03, 2016 ]
Ease of installation for pre-wired homes. [ Brian  Jul 17, 2016 ]
Liked that it mounts directly to an electrical box [ Jon  May 01, 2016 ]
Recommended by advisor Chad Chad's Bio: [ ERIK  Apr 19, 2016 ]
Everything you need for installation when you have wall boxes for your surround speakers [ Dillon  Nov 19, 2017 ]
I have wall outlets already in place, I love the idea of not having to drill additional holes in the wall and that the speakers are mounted to studs. [ Michael  Jun 30, 2017 ]
it was a recommended mount to go with the Polk Audio OWM3 satellite speakers when I clicked the Accessories tab. [ MICHAEL  Dec 27, 2016 ]
Flexible options for mounting. Looks like these mounts can handle any situation. [ Daniel  Dec 24, 2016 ]
mounting options, fit speaker wire outlets in my home [ Frederick  Oct 22, 2016 ]
My new home is prewired for surround sound with electrical boxes. This mount is the only one that attaches directly to the electrical box with no other modifications required. [ Shawn  Oct 17, 2016 ]
Looking for a wall mount that can hold beyond the actual weight of the speaker. Lots of pointing options. Mounts onto wall plate box mount. [ hugh  Apr 28, 2016 ]
recommendation of Crutchfield employee; good reviews [ Matthew  Feb 29, 2016 ]

5 questions already asked

I have used 4 of these very successfully to mount Polk VM10 speakers in two different rooms. One of the speakers I had to use the long arm mount to miss a curtain rod. I recommend these. [ Christopher L.  Dec 10, 2016 ]
These mounts are awesome. They will work on any speaker that has a threaded (mounting) hole on the back side. Don't worry about the thread type or size, as the mount includes several adapters. [ Joseph  Dec 07, 2016 ]
A junction box would be optimal but is not required. If you are to mount in drywall make sure you use the proper anchor screws and verify the drywall can support the weight you plan on holding. [ Paul  Jun 02, 2016 ]
I suppose that you could mount them right to drywall as long as you are using some hefty anchors. They recommend mounting to studs for stability purposes. I am using junction boxes for mine due to the location they have to be in and the weight of my speakers (they are older Infinity satellites). [ Robert  May 20, 2016 ]
I specifically selected this mount because it mounted on a junction box and it works very well. I see no reason why it would not mount to wall given the correct mounting hardware. You can also use an "old work" junction box. If not using a junction box, there are other options that would have a smaller footprint. [ MICHAEL  May 19, 2016 ]
As long as the speaker is light enough, you probably could mount it in drywall, but you might want to invest in some drywall screws or put it where there's a stud. [ Jeffrey  May 18, 2016 ]
No do not need a junction box. Can mount directly to a stud [ Geoffrey  May 18, 2016 ]
They are not recommended for use with the Acoustimass 10 series V speakers, no. The Bose UB-20 II are the recommended mounting brackets for those speakers: I hope that helps! My Bio: [ Ryan  Mar 18, 2016 ]  Staff
I can't say with 100% certainty, because I don't know what the back of your speakers look like. But they looked to me like they would fit any application out there. They are well worth the money too. [ Chad  Nov 12, 2017 ]
These mounts were installed with white Cambridge Minx Minn 22 Satellite Audio speakers. I used the mounts to point the sound in desired directions. Came with 2 types of ceiling installation brackets/screws/plates. Combination working well with newly white painted semi gloss ceiling. [ Ernest  Nov 12, 2017 ]
I have these for both ceiling and wall mount with the Polk TL's. They work great in both applications. [ David  Jun 11, 2016 ]
I have these mounts and love them. Once I get home and check the box I'll see if ceiling mount will work. Btw, I have the speakers and love them. Just make sure you pair those with a good sub. [ DAVE  Jun 11, 2016 ]
I have mounted some Polk surround sound speakers not sure the model but they worked well. [ BRADLEY  Jun 10, 2016 ]

would like to send you to a different page.

Go there