Samsung WMN-M21E No Gap Wall Mount
Fits 75" 2017 Samsung QLED TVs
Our take on the Samsung WMN-M21E No Gap Wall Mount by Crutchfield's Steve Kindig
Samsung's "no-gap" mounting solution
The Samsung WMN-M21E No Gap Wall Mount is designed specifically to mount a Samsung QLED 75" TV (including the Q7F, Q8C, and Q9F series). The minimal gap between wall and TV — 0 to 1/4" depending on the TV model — is possible because the part that attaches to the TV fits a carved out area on the back of the set.
Surprisingly, this no-gap design still allows you to tilt your Samsung QLED TV downward 5°. This means you can mount your TV high on the wall — like over a fireplace — and tilt it downward for a better viewing angle.
- designed specifically to wall-mount a Samsung QLED 75" TV (including the Q7F, Q8C, and Q9F series)
- mounts your TV to the wall with a gap of 0 to 1/4"
- tilt mechanism allows you to tilt the TV downward 5° for a better viewing angle
- stud-mounting required (included wall bracket plate works with 16" OC studs only)
- mounting hardware included
- Note: This wall-mount bracket does not support standard VESA mounting patterns and is only compatible with the Samsung QLED TVs listed above
- warranty: 1 year
- Our 60-day money-back guarantee
What's in the Box:
- Wall bracket
- TV bracket
- 2 Support brackets
- 8 Spacer adapters
- 2 Screw-in supports
- Five M6x 14mm screws
- Five M6 x 10mm screws
- Six 2.125" (length) screws
- Four 1.375" (length) screws
- 6 Large anchors
- 4 Small anchors
- 5 Washers
- 4 Rectangular self-adhesive foam pads
- 4 Round self-adhesive foam pads
- 4 Self-adhesive strips
- 4 Self-adhesive mounting pads
- 7 White stickers
- Intallation Guide
- Additional Installation Instructions
- Wall-Mount Template
- "Cautions When Installing" booklet
- TV bracket diagram
- Warranty Information
No gap. No gimmicks. This is a real flush mount. Gets an extra star for being tilt-ready without any needing adjustments.
Samsung WMN-M21E No Gap Wall Mount Reviews
Average Customer Review(s):
Thanks for submitting your review
Compatibility: The Samsung WMN-M21E No Gap Wall-Mount is designed specifically to wall mount a 2017-2018 Samsung 75" QLED TV (including the Q9F, Q8C, Q7C, and Q7F series).
Note: This wall-mount bracket does not support standard VESA mounting patterns and is only compatible with the Samsung QLED TVs listed above.
No Gap Design: The Samsung WMN-M21E mounts your Samsung Q8C, Q7C, and Q7F series TV to the wall with a gap of 0 to 0.125" The Samsung Q9F series TV will have a 0.25" gap or more from the wall. The distance between the wall and the left or right side of the TV may different depending on the wall and installation conditions. A larger gap between the back of the QLED TV and the wall may occur if the wall is not 100% flat or is constructed off angle to the floor (or if the wall-mount installation is done incorrectly).
Note: Eight wall spacer adapters are included if there is protruding part of the wall that requires that you mount the TV further from the wall.
Tilt Mechanism: The Samsung WMN-M21E No Gap Wall-Mount allows you to tilt your Samsung QLED series TV downward 5°. This allows you to mount your TV high on the wall (like over a fireplace) and tilt it downward for a better viewing angle.
Wood Stud & Concrete Installation: The Samsung WMN-M21E comes with the appropriate hardware to mount the bracket to wood studs or a concrete wall. The included wall bracket plate supports 16" OC wood studs (24" OC is not supported) using the supplied hardware. In addition, anchors are supplied for concrete wall installation.
Level Adjustment: Once your QLED TV is installed on the No Gap Wall-Mount, you can level up the TV by adjusting the horizontal level of the WMN-M21E from 1° to 2°. If you cannot level up the TV with this adjustment, then you need to reinstall the bracket to the wall and TV.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
Why did you buy this?
Saw the demo in a local store and it keeps the TV looking so flush against the wall. Local store was out of stock for the 75" mount and would have to special order. [ Kevin Feb 12, 2018 ]
I want the least possible gap from panel to wall - looked at several generic recessed options but want to know it's a perfect fit for the Q7F panel. [ David Feb 04, 2018 ]
Best wall mount for my TV [ B Jan 09, 2018 ]
I just ordered Samsung 75" QLED tv so I need this wall mount for that tv. [ Hatch Nov 19, 2017 ]
I wanted a cleaner installation and this purpose built mount for my specific TV is engineered both to support the weight and also to keep it very close to the wall giving it a custom look. [ Adam Nov 05, 2017 ]
used it before [ William Oct 17, 2017 ]