Sanus Classic MLT14
Tilt wall mount for 37"-80" TVs
Our take on the Sanus Classic MLT14 by Crutchfield's Ralph Graves
A tilt mount for most TVs
The Sanus Classic MLT14 mount features fingertip control so you can easily adjust the tilt without tools. You can tilt the mount up to 5º up, and 10º down. The mount can support TVs with screen sizes from 37”-80" and weighing up to 130 lbs. Once you've secured the brace to the wall, the mount just slides into position. Safety locks that close with audible clicks let you know it's securely in place. The mount can be shifted slightly left or right on the wall plate so the TV is centered, even if your wall studs are off-center.
Will this mount work with my TV?
Use the Sanus MountFinder™ to see a list of mounts that work with your specific TV.
Where do I drill the holes?
Tell the Sanus HeightFinder™ Installation Assistant how high you want your TV, and it tells you exactly where to drill.
- designed for TVs 37"-80"
- supports up to 130 lbs.
- vertical tilt range: +5° to -10° (may vary with size of TV)
- easy one finger tilt adjustment
- stud-mounting required
- mounting hardware included
- 27-11/16"W x 18-3/4"H x 1-15/16"D
- warranty: 5 years
- Our 60-day money-back guarantee
What's in the Box:
- 2 TV brackets
- Four M5 x 12mm bolts
- Four M5 x 35mm bolts
- Four M6 x 12mm bolts
- Four M6 x 20mm bolts
- Four M6 x 35mm bolts
- Four M8 x 16mm bolts
- Four M8 x 20mm bolts
- Four M8 x 35mm bolts
- Four M5 washers
- Four M6/M6 washers
- Four 5/6" x 2-3/4" lag bolts
- 4 Lag bolt washers
- 4 Wall-anchors
- 4 Spacers
- Instruction Manual
Straight forward, simple installation. Worked great for new 40"
jon, Katonah, NY
Sanus Classic MLT14 Reviews
Average Customer Review(s):
Thanks for submitting your review
TV Capacity: The Sanus Classic Series MLT14 wall-mount bracket is designed to support flat-panel TVs from 37" to 80", weighing up to 130 lbs.
VESA Bolt Pattern: The Sanus MLT14 wall-mount bracket accommodates a horizontal hole spacing on back of the TV of 50mm-705mm and a vertical hole spacing of 50mm-450mm. The MLT14 comes with M5, M6, and M8 size bolts of differing lengths to mount the bracket to your TV. It will accommodate the following VESA hole patterns in accordance with industry standards set by the Video Electronics Standards Association:
- 50mm x 50mm
- 75mm x 75mm
- 100mm x 100mm
- 200mm x 100mm
- 200mm x 200mm
- 300mm x 200mm
- 300mm x 300mm
- 400mm x 300mm
- 400mm x 400mm
- 500mm x 300mm
- 500mm x 400mm
- 600mm x 300mm
- 600mm x 400mm
- 700mm x 300mm
- 700mm x 400mm
Note: Additional hardware may be required for your specific model of TV. For example; shorter or longer screws, thicker or slimmer washers or spacers. These additional accessories can often be found at your local hardware store.
Low-Profile: Its low-profile design positions the TV just 1.0625" from the wall for a clean appearance.
Tilting Design: The Sanus Classic Series MLT14 tilting mount gives you the best view of your wall-mounted television from the floor or couch. Innovative technology provides up to 15º (+5°/-10°) of tilt with the touch of a finger, making it easy to reduce glare and improve viewing angles without tools. Tilting the TV also provides easier access to cable connections on back of the television.
Perfect Positioning: Your TV can slide from side-to-side on the MLT14 wall-mount for perfect positioning on the wall. The TV brackets easily shift left and right on the wall plate to allow perfect TV placement, even with off-center wall studs.
Safety Tabs: Once the wall bracket is anchored to the wall studs and the two TV brackets are attached to the back of your television, the two TV brackets hook into the wall bracket. Integrated safety tabs on the TV brackets provide a safe and easy connection to the wall bracket you can hear. There is a strap on each TV bracket which allows you to disengage the safety tabs and remove your television from the wall bracket.
Construction: The MLT14 bracket is constructed of heavy-gauge steel with a durable powder-coated black finish. This solid construction provides strength and increased safety.
Wall-Plate: The wall plate must be mounted to wall studs spaced 16" or 24" OC. The wall-plate can also be anchored to a brick, block, or concrete wall. Lag bolts, washers, and wall-anchors are supplied.
Installation Tools: The following tools are recommended for mounting the MLT14:
- Tape measure
- Stud finder
- 7/32" Drill bit (for wood stud)
- 3/8" Drill bit (for masonry)
- 1/2" Socket wrench
- Screw driver
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
Why did you buy this?
Mount 44 inch flat screen television to the wall. [ C Jul 02, 2018 ]
cost [ David Feb 04, 2018 ]
good review [ chang Jan 13, 2018 ]
It fit the TV [ C Dec 19, 2017 ]
I actually chose this mount so that I could move a 10 year old Panasonic Plasma into another room. The "old" flat screen mount will be used with the "new" TV. The old mount has a security bar, which unless you know it's there, makes it impossible to remove the TV from the wall. Ops! I've told you too much... [ Harry Dec 05, 2017 ]
My Crutchfield advisor, Ziggy, chose it for me as the best way to mount my new TV on the wall. [ Judith Nov 29, 2017 ]
I chose this product for a couple reasons; one, I needed something that would allow for a close to the wall fit and tilt a little and this fit those requirements, and two, I have another Sanus wall-mount for a TV and it has worked trouble-free for several years. [ Wayne Aug 07, 2017 ]
to support my new tv on the wall [ Gerald Jul 30, 2017 ]
sleek [ Mohan Jun 20, 2017 ]
I have a 55" TV I'd like to Hangup on the wall so there is less clutter [ Nickolaos May 25, 2017 ]
recommended by specialist [ JOSEPH May 02, 2017 ]
Highly rated by customers [ Chris Apr 21, 2017 ]
Needed a mount [ jerry mark Apr 05, 2017 ]
Good reviews [ PAUL Feb 05, 2017 ]
Works well in our RV with 40" Samsung TV [ Hecht Dec 18, 2016 ]
mount the tv [ joseph Dec 04, 2016 ]
Quality and ease of installation [ NEIL Nov 09, 2016 ]
Used this product before and it worked great [ Thomas Nov 02, 2016 ]
This unit had excellent customer reviews, plus I downloaded the installation manual ahead of time to confirm that it would be ideal for my application. [ Paul Nov 02, 2016 ]
recommended by Ringo Ringo's Bio: http://www.crutchfield.com/Support/Bio.aspx?bio=164 [ Joseph Sep 10, 2016 ]
Max said it would work. Max's Bio: http://www.crutchfield.com/Support/Bio.aspx?bio=155 [ Christopher Aug 08, 2016 ]
Because the feet are too wide for my TV stand. [ Steve Jul 06, 2016 ]
low profile [ Bradley May 19, 2016 ]
Looks like the right economical option for my TV. Easy to set up, good price. [ Brian Apr 04, 2016 ]
This unit was recommended by my installer of my new Sony 75 in TV. [ Lawrence L. Bou Feb 13, 2016 ]
recommended by advisor [ Allen Jan 25, 2016 ]
Lower price [ sergio Jan 12, 2016 ]
This mount seems like the right choice to hang my 65 inch new Samsung JS8500 4KUHDTV. I think I will use the tilting option but also like the low profile. The TV has recessed connections so can mount close to the wall. The TV weighs 70 pounds so well within the limits of the mount. [ Kevyn Jan 11, 2016 ]
I have purchased Sanus tv mounts before from Crutchfield and was pleased with the quality and service . This is purchased for a 50" 4k Samsung and this Sanus mount is low profile , so will be close to wall without sticking out . The cost and quality is also a factor in purchasing Sanus . [ linda Dec 15, 2015 ]
to mount my new tv [ Dennis Dec 11, 2015 ]
2 questions already asked
Thanks for your question. Our scratch and dent stock is going to have very minor cosmetic flaws. Warranty as well as Crutchfields 60 day satisfaction guarantee still apply. Hope this helps. [ Kenny Jan 27, 2017 ] Staff
This kit provided all the necessary hardware needed to mount my Sony TV [ BRUCE S Nov 24, 2015 ]
I'm not sure there's a way to find the answer to that unless you can find a list of TVs that this mount includes bolts for. [ Mark Nov 23, 2015 ]