Sound Ordnance™ M-1500
Mono subwoofer amplifier 500 watts RMS x 1 at 2 ohms
Item # 777M1500 | MFR # M1500
This item is no longer available.
Our take on the Sound Ordnance™ M-1500 by Crutchfield's Buck Pomerantz
Win the battle for great sound in your ride. Sound Ordnance amplifiers feature tough construction, rugged looks, and a 3-year warranty, so you can enjoy the full power of your music for the long haul. Even better, you can add Sound Ordnance to your arsenal at a surprisingly affordable price.
The Sound Ordnance M-1500 mono amplifier packs a 500-watt wallop that'll give your subwoofers some serious firepower. An adjustable low-pass filter and a variable bass boost allow you to control your bass barrage at will.
The M-1500 amplifier uses sophisticated power supply and output technologies to ensure clean amplification from the inputs all the way to your speakers. Special circuits protect the amp from overheating and short circuits, and a turn-on delay virtually eliminates that annoying thump when you turn your system on.
- mono subwoofer amplifier
- 300 watts RMS x 1 at 4 ohms (500 watts RMS x 1 at 2 ohms)
- variable low-pass filter (40-300 Hz, 12 dB/octave)
- variable bass boost (0-12 dB at 45 Hz)
- variable subsonic filter (10-40 Hz)
- PWM (pulse width modulation) power supply with MOSFET output
- preamp inputs and outputs
- fuse rating: 30A x 2
- 8-gauge power and ground leads recommended wiring and hardware not included with amplifier
- 15-1/4"W x 2-1/8"H x 9-13/16"D
- warranty: 3 years
- Our 60-day money-back guarantee
What's in the Box:
- Mono amplifier with two 30A ATC blade fuses inserted
- Spare 30A ATC blade fuse
- 4 Self-tapping screws (5/8" length)
- 4 Split lock washers
- 4 Flat washers
- Remote bass control module
- 16.5' Remote bass control cable (with 6-pin RJ25 modular phone plugs on each end)
- 2 Self-tapping screws (3/8" length)
- 2 Small split lock washers
- Owner's Manual
I bought this amp for my 1980 half ton pickup and mated with a pair of 12in Woofers and BOOM this amp Bumps like a Pro, and for the price Awesome Performance thank you Crutchfield for your Products, I'm a Fan for Life,,,,
Richard, Tulare, CA
Sound Ordnance™ M-1500 Reviews
Average Customer Review(s):
Thanks for submitting your review
Features and Specs
|RMS Power Output (Watts x Channels)||
300 x 1 |
|Peak Power Output (Watts x Channels)||1100 x 1|
|Power at 2 Ohms (Watts x Channels)||500 x 1|
|Bridged Power (Watts x Channels)||N/A|
|Minimum Impedance Bridged||N/A|
|Minimum Impedance Unbridged||2|
|Best Frequency Response||12-300 Hz|
|THD at Rated RMS Power||1%|
|Signal to Noise Ratio||110 dB|
|Low-Pass Crossover Frequency||40-300 Hz|
|Low-Pass Slope (dB/octave)||12 dB/oct|
|High-Pass Crossover Frequency||N/A|
|High-Pass Slope (dB/octave)||N/A|
|Bass Boost||0-12 dB|
|Bass Boost Frequency||45 Hz|
|Speaker Level Inputs||No|
|Preamp Outputs||1 pair|
|Parts Warranty||3 Years|
|Labor Warranty||3 Years|
Power Ratings: The Sound Ordnance M-1500 is a mono-block Class AB amplifier with an RMS power rating of 300 watts per channel into 4 ohms, and 500 watts per channel into 2 ohms.Power ratings are measured with an input power of 14.4 volts.
Crossovers: The M-1500 is equipped with a low-pass crossover and a subsonic filter. You can set the low-pass cutoff frequency between 40Hz and 300Hz. The subsonic filter, designed to block ultra low frequencies that can damage speakers and rob amplifier power, is variable between 10Hz and 40Hz. The crossovers have a 12dB per octave slope, and cannot be turned off.
Bass Boost: The amplifier has a rotary bass boost control. Boost is continuously variable from 0dB to +12dB and centered at 45 Hz.
LED Indicators: The M-1500 features two LED indicators: a green LED that illuminates when the amp is powered on, and a red LED that illuminates when the amplifier is in protect mode due to overheating or a short circuit in the speaker wire.
Remote Bass Control: The amplifier comes with a remote bass control module to allow you to adjust the volume of the amp from the front of the vehicle. The module has a rotary volume control knob, and an LED to indicate when the amplifier is turned on. The module is designed to mount under the dash, and comes with 16-1/2 feet of cable.
Removable End Caps: The end caps on the M-1500 are removable with a 3mm Allen wrench (not supplied) to make it easier to attach the power and speaker wires.
Power Connections: The power and ground connections are set screw terminals that will accommodate up to 8-gauge wire. (An 8-gauge amplifier wiring kit is recommended.) The remote turn-on terminal is a set screw terminal that will also accept up to 8-gauge wire. A Phillips-head screwdriver (not supplied) is required to tighten/loosen the terminals.
Speaker Connections: The speaker connections are set screw terminals that will accommodate up to 8-gauge wire. Even though this is a mono amplifier, there are two sets of speaker outputs. The terminals are wired in parallel internally, allowing you to connect two 4-ohm speakers to separate terminals. A Phillips-head screwdriver (not supplied) is required to tighten/loosen the terminals.
RCA Inputs and Outputs: The amplifier features a pair of stereo RCA inputs for connecting your head unit. There is also a pair of stereo RCA outputs for feeding the preamp signal to another amplifier, if needed.
Fuses: The M-1500 features two 30-amp ATC blade fuses.
Our Product Research Team
At Crutchfield, you'll get detailed, accurate information that's hard to find elsewhere. That's because we have our own in-house Product Research team. They verify what’s in the box, check the owner's manual, and record dimensions, features and specs. We stay on top of new products and technologies to help people make informed choices.
Product reviews from the Crutchfield Labs
by Video Team
Make your music sound lively and vital with a Sound Ordnance amplifier. Watch this Crutchfield video to see what these rugged, value-packed amplifiers have to offer.
Why did you buy this?
It paired nicely with the S/O 12" sub. [ Nicole Apr 25, 2018 ]
inexpensive [ PETE Dec 09, 2017 ]
I researched this Vs the Rockford Fosgate line both on Crutchfield as well as from other sources, and in nearly every single review I saw these compared favorably to better known brands such as Rockford Fosgate. With a 3 year warranty AND Crutchfield's lifetime customer support, I don't feel I could have a "better *BANG* for my buck". I am a professional auto tech w/30+ yrs exp, and every single vehicle of mine could be quantified as a "stereo on wheels!". Great way to NEVER have to hear rap! [ KCBon Nov 21, 2017 ]
Good quality at a great price [ Jeremy Nov 15, 2017 ]
1st time buying amp trusted crutchfield reputation for a solid product for someone with a tight budget [ Joshua Jun 14, 2017 ]
Recommended by an advisor and it does not disappoint! Cheap and good sound! [ mrkramer1979 Jun 14, 2017 ]
Need a new amp. Great price. [ A May 26, 2017 ]
good for the price [ ross Feb 02, 2017 ]
Reviews are very good on this amp and great price and 3 years warranty hard to beat. [ L Dec 31, 2016 ]
I needed some real power to run two 12s at 2ohms. This thing did it without a hitch and never ran hot. The warranty can't be beat and it always performes flawlessly. Also the price is spot on! [ LESLIE J Dec 27, 2016 ]
Christmas present for my son [ debra Nov 27, 2016 ]
recommended [ Bartholomew Oct 03, 2016 ]
Sound Ordnance is top quality at affordable price and add a 3 year warranty and You can't go wrong [ Marc Aug 06, 2016 ]
My old 800 watt amp died and instead of going with another 4 channel amp i decided to just go with a mono amp and hook straight into my sub. For the combo deal I was able to get this at, seemed like a no brainier with my old sub showing signs of wear in it's diaphragm. I won a few SO speakers and powered subs so I figure why not try the amp by itself. [ Mr. Jul 05, 2016 ]
Need power for the subs...Works great! [ Benjamin Jun 17, 2016 ]
I ordered this amplifier because it provided the recommended 4ohm RMS power rating for the JL Audio 8w3 while receiving good ratings and reviews and from many articles produces a very clean sound and has clean output. Also worth noting, in many online articles, Sound Ordnance is known for being an underdog, so to speak, producing great products but currently being young and small and having to sell cheap to keep selling against big names, which for me means, good cheap amplifier. [ Jacob Apr 30, 2016 ]
I biggest reason I chose this was the advice given on Crutchfield's website. It was easy to understand for a novice and still informative for and advanced user. I seemed to me to be a good price for this product. I've had good results with my previous purchases with Crutchfield. [ Jason Apr 22, 2016 ]
good price [ KIM DANIEL Apr 17, 2016 ]
Good review and price [ Anna Apr 16, 2016 ]
Cost effectiveness [ Stephen Apr 09, 2016 ]
Sound Ordnance has a good reputation for good quality. [ BRYAN H Mar 20, 2016 ]
this was a great price and just what i was looking for [ joseph emery Mar 16, 2016 ]
reviews, combo deal, give it a try. Not afraid of trying new brands. [ Juan Mar 04, 2016 ]
Recommended by Andy at Crutchfield. Andy's Bio: http://www.crutchfield.com/Support/Bio.aspx?bio=42 [ George Feb 29, 2016 ]
Needed new AMP and have been very happy with the Sound Ordnance gear [ ROBERT Feb 25, 2016 ]
Gud deal [ Keellen Feb 11, 2016 ]
Good [ angel Feb 10, 2016 ]
Solid gear [ Brian Dec 31, 2015 ]
15 questions already asked
This amplifier is a mono channel amp, which means that it is designed only for use with sub woofers. In my case, I bought this amp to power a 300w kicker comp-S in my sedan. The amp arrived within a few days and I was thoroughly impressed with the build quality. The installation was a breeze, and within a couple of hours it was put to use. One Installation note is that the amplifier has a grate section on the bottom to allow for airflow. When I first installed the amp in my trunk, I had it sitting with those vents covered up. As a result, the amp got very hot and went into protection mode. This problem was easily fixed by propping the amp up on two pieces of wood in order to allow airflow under the device. After that was fixed, the amp has barely even been warm to the touch. To conclude, I would definitely recommend this amp to any one that is looking for a good amount of power for not too much money. [ Max Robert Oct 19, 2017 ]
4 speaker ports their are them amp has serious bounce and power highly recommend [ william Oct 19, 2017 ]
If you will look in the details section, you'll see it's listed as a class AB [ Lucas Jun 16, 2017 ]
1 answer Will this amp push kicker (2) 10c154 comp s 15" 4 ohm subwoofer in a sealed box of my 2015 Chrysler 200 good ? Cause I was told that on the phone by Crutchfield worker, subwoofer is 50-250 Watts RMS. Peak power handling: 500 watts. Because I was skeptica because I was on the phone and a previous worker told me 1000 w ken wood amp is the one for it, and I had a friend which had a 1200 w amp (4 channel). And just thought that amp will underpower the subs. [ Dwily May 03, 2017 ]
As long as the 4-ohm coils on each of the Kicker 10C154 subwoofers are wired together in parallel to show the Sound Ordnance M-1500 amp a 2-ohm load, then that would match up very nicely. If you would like to discuss further, feel free to contact an Advisor directly by phone (1-800-324-9695) or online chat. Hope that helps! [ Larry May 08, 2017 ] Staff
Thanks for your question. For information on selecting the best amp for your subs I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the amp models and help you make the best choice for your system. [ Krissy Jul 15, 2016 ] Staff
First off, you will be very limited w/ a stock deck that had no RCA out puts... The only way I know is, you have to buy a inline output converter and connect it to the stock speaker outputs... Then you can run some some RCA's to your Amp.. Your best friend will be that bass knob & dials that the Amp comes w/ especially since you don't have a sub output fr the deck... Good Luck.! [ OWEN K Mar 12, 2016 ]
Im sure you can connect to your Toyota but you will need to buy a rca converter. That is what I bought and used to connect to my stock factory head unit in my 2013 infiniti g37x [ Victor Mar 11, 2016 ]
I would say your best bet would be on the back of your rear seats. I put mine on the back of my subwoofer even though I read its bad, but not much changed in my opinion. [ Andrew Feb 11, 2016 ]
I mounted mine with capacitor on the back of the back seat. You might not have enough power to power 2 12s [ Corey Feb 11, 2016 ]
Without knowing what kind of car you have or the dimensions of the sub enclosures, that will be hard to answer [ DUKE Feb 11, 2016 ]
Anywhere. [ CARL R Feb 11, 2016 ]
What year make and model of car ? How big are the sub enclosed ? Dimensions ? [ DUKE Feb 11, 2016 ]
You need to wire the positives to the positive terminal of the amp and both negatives to the negative terminal of the amp to achieve a 2 ohm to 2ohm hook up. [ MARK Jan 25, 2016 ]
Even though this is a mono amplifier, there are two sets of speaker outputs. The terminals are wired in parallel internally, allowing you to connect two 4-ohm speakers to separate terminals. [ Jeff Jan 25, 2016 ] Staff
If you purchased the product from Crutchfield, feel free to contact our Tech Support team. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer. You can also post your question in our forums: http://community.crutchfield.com. Or try our online support center: http://crutchfield.custhelp.com/app/answers/list/kw/. [ Krissy Apr 10, 2015 ] Staff
I'm pretty sure the input level would be considered the gain adjustment. [ PAUL Jan 01, 2015 ]
Honestly i used the bass gain remote that i also came with the amp. Your supposed to use only 3/4 up in the gain without the remote but with it you can adjust from up front without ever touching the amp. It does have a rotary bass control but use the remote it will make a difference. [ GABRIEL Dec 31, 2014 ]
Thanks for your question. For information on selecting the best amp I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the amp models and help you make the best choice for your system. [ Krissy Nov 02, 2014 ] Staff
Mine is "slightly" tucked away in the rear of my truck, and it gets hot but I'm pushing two Polk audio Dxi's. If your using most to all the power this things puts out its gonna get warm after 30 min and hot around 45 min of continuous MAX output. hope this helps. Also, i have had this amp for over a year and it is loud and reliable, no problems what so ever, great build quality! [ MICHAEL Oct 20, 2014 ]
I keep it in my trunk and it overheats when it gets real hot outside. It has a cutoff feature though so it doesn't get ruined. All I do is open up the back seat and blast the A/C so it cools off. As long as you have good airflow over it it should be fine. [ PAUL Oct 18, 2014 ]
I would have to say no it would not, the footprint of the amp is just entirely too large. I went with a Rockford Fosgate amp and it worked fine, but this thing is entirely too large. [ RICKY A Oct 17, 2014 ]
It will work and doesnt get hot from no airapace but i had this amp attached to the backseat in my civic hatchback. So honestly under your seat i couldnt tell gou yes or no bit hell of an amp [ GABRIEL Oct 17, 2014 ]
In my opinion it would not be too hot to mount under seat but possibly too big. Amp never got very hot on me. Definitely would not fit under my Honda accord seat [ JAMES E Oct 17, 2014 ]
Thanks for your question. For information on selecting the best amp I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the amp models and help you make the best choice for your system. [ Krissy Jul 13, 2014 ] Staff
If you purchased the product from Crutchfield, feel free to contact our Tech Support team. They can walk you through the settings on the product. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer. You can also post your question in our forums: http://community.crutchfield.com. Or try our online support center: http://crutchfield.custhelp.com/app/answers/list/kw/. [ Krissy May 21, 2014 ] Staff
I connected 2 JL Audio single subs to this amp and it was too loud for my taste. So my answer is yes you can. [ RYAN May 01, 2014 ]
This amp has two channels, I has it powering two dxi polks. And it does the job. I have it tuned bad and need to take it in to a shop but I defently does the job. [ MICHAEL Apr 30, 2014 ]
Yes it will work perfectly fine. It will also turn your 2 ohm in to 4 ohm phase. Good amp powerful and full hitting hard amp. [ GABRIEL Apr 30, 2014 ]
It will work with a dual sub system, that is I was running it with the subs wired in parallel. You can get a two into one connection from Radio Shack or just run both connections to the single connection...either way it will work. [ CURTIS A Apr 30, 2014 ]
All depends on how you wire it [ BURBON Apr 30, 2014 ]
As long as you do not push less than 2 ohms. Two 4 ohm subs wired parallel will work fine with the 1500. Two 2 ohm subs will not. [ RYAN Apr 30, 2014 ]