About the Sennheiser e 602-II Kick Drum Package
With all the details involved in shopping for a microphone, it's easy to forget that you'll also need a microphone stand and cable. We designed this bundle to simplify shopping, and save you some cash.
The microphone
Sennheiser designed the e 602-II mic
for kick drums and other low-frequency applications.
Sennheiser designed the e 602-II for accurately capturing low-frequency sound, so it's ideal for miking kick drums, bass guitar cabs, tubas, and other low-pitched instruments. The mic features a built-in stand adapter for placement flexibility. And because its body is lightweight aluminum, it can be used on an extended boom for overhead miking. The e 602-II features a humbucking design that cancels out unwanted low-frequency hum and electronic noise. And the voice coil's lightweight, high-performance construction ensures fast transient response, for clear sound with lifelike dynamics.
The K&M stand lets you dial in the mic position accurately.
The bundle
You'll install the D112 in this high-quality, German-made, low-height tripod microphone stand from K&M. It's not just another stand, it's a piece of equipment you'll use for years to come. We also include a Whirlwind 25-foot microphone cable to connect the mic to the mixing board.
The e 602-II bundle is ready to help fill out your low end. Let it work for you, and save a bundle.
What's in the box:
Sennheiser e 602-II Kick Drum Package owner's manual
- The Sennheiser e602-II Kick Drum Package consists of the Sennheiser e602-II bass drum microphone with a K&M microphone stand and a 25-foot Whirlwind microphone cable (all individually packaged)
- The e602-II microphone box includes:
- Microphone
- Stand mount (attached to mic)
- Nylon carry-pouch
- Instruction manual (Eng / Span / Fren / Others)
- The K&M Microphone stand box includes:
- Leg assembly
- Boom arm assembly
- 2 Plastic cable clips (installed)
- T-bar locking screw
- The Whirlwind microphone cable box includes: 25' Mic cable (w/ a male XLR connector on one end and a female XLR connector on other end)
- Cable tie
Customer reviews for Sennheiser e 602-II Kick Drum Package
Loading...
Loading reviews...
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Sennheiser e 602-II Kick Drum Package
Product Research
Bundle Overview
Microphone Features
Stand Features
Cable Features
Bundle Overview
Overview: The Sennheiser E602-II Kick Drum Package includes a Sennheiser E602-II dynamic microphone, along with a K&M mic stand and a 25' Whirlwind microphone cable.
Microphone Features
Microphone Overview: The Sennheiser E602II is a dynamic microphone with a cardioid pattern, designed especially for bass frequency instruments such as kick drums, bass guitar amps, and brass instruments. It has a tailored frequency response that emphasizes the low and high frequencies with a cut in the midrange. Other features include a fast transient response, low-frequency extension, a lightweight high-performance voice coil , and an integrated stand mount. It's rugged, lightweight aluminum body allows for stable positioning on long boom arms.
Polar Pattern: The E602II has a cardioid polar pattern, which has maximum sound pickup directly in front of it, slightly less pickup from the sides, and no pickup from the rear of the mic.
Connection: The E602II provides a balanced output on a standard male, 3-pin XLR connector.
Stand Mount: The integrated stand mount on the E602II allows approx. 180° of tilt and has a 3/8" threaded socket.
Microphone Warranty: The Sennheiser E602II microphone carries a 2-year warranty.
Specifications:
- Transducer Type: Dynamic
- Pick-up Pattern: Cardioid
- Frequency Response: 20 Hz - 16 kHz
- Sensitivity:
- @ 1 kHz: 0.25 mV/Pa
- @ 60 Hz: 0.9 mV/Pa
- Nominal Impedance: 350 Ohm
- Min. Terminating Impedance: 1000 Ohms
- Connector: 3-Pin XLR
- Dimensions:
- Length: 6.02"
- Diameter: 2.38"
- Weight: 11.217 oz.
Stand Features
Overview: The König & Meyer (K&N) 25910-500-55 professional microphone stand has an extra-low profile, making it ideal for use with bass drums or guitar amplifiers, or for other special uses. The stand features all metal construction with black powder-coated steel tubing and a zinc die-cast base. It has a 20-5/8" one-piece boom, with a square swivel joint and a 3/8" threaded connector. The tripod base has foldable legs that provide a solid foundation. The stand has a maximum height of 11.02".
Stand Warranty: The K&M Microphone Stand carries a 5-year warranty.
Cable Features
Connect Series: The Whirlwind MIC25 microphone cable is part of the MIC series that offers great value. The cable has a black PVC jacket with polyethylene insulation, and is terminated with male and female XLR connectors. It comes with a hook-and-loop cable tie to keep them neat for storage. These imported cables are available in four lengths: 3', 10', 25', and 50'. This cable is 25' in length.
Cable Warranty: The Whirlwind Connect MIC25 microphone cable carries a Limited Lifetime warranty.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...